[PATCH v3 0/8] arm64: synquacer: DeveloperBox updates

Masami Hiramatsu masami.hiramatsu at linaro.org
Mon Jul 12 12:35:35 CEST 2021


Hi,

Here is the 3rd version of the series to update the DeveloperBox support.
I found that the latest master branch update defconfigs with
savedefconfig by;

  commit 2bba78076b03 ("configs: Resync with savedefconfig")

So I decided to update the patches for the defconfig so that
those can be applied cleanly and use defconfig to sync it up.

And in this version, I also add 2 patches to support capsule
update correctly.


[1/8] board: synquacer: Initialize SCBM SMMU at board_init()
   - This is a driver cleanup, split the SMMU setup from the driver.

[2/8] configs: synquacer: Make U-Boot binary position independent
  - This makes U-Boot position independent for usability.

[3/8] dts: synquacer: Add partition information to the spi-nor
[4/8] configs: synquacer: Remove mtdparts settings and update DFU setting
  - These are the fixes according to the MTD subsystem update.
    (Thanks Marek!)

[5/8] configs: synquacer: Drop Ext2/4 support by default
[6/8] configs: synquacer: Enable UEFI secure boot
  - These are making U-Boot more likely to EDK2 behaviors.

[7/8] configs: synquacer: Use RAW capsule image instead of FIT
[8/8] configs: synquacer: Ignore OsIndications on DeveloperBox
  - These are for supporting capsule update on DeveloperBox.

Thank you,

---

Masami Hiramatsu (8):
      board: synquacer: Initialize SCBM SMMU at board_init()
      configs: synquacer: Make U-Boot binary position independent
      dts: synquacer: Add partition information to the spi-nor
      configs: synquacer: Remove mtdparts settings and update DFU setting
      configs: synquacer: Drop Ext2/4 support by default
      configs: synquacer: Enable UEFI secure boot
      configs: synquacer: Use RAW capsule image instead of FIT
      configs: synquacer: Ignore OsIndications on DeveloperBox


 .../dts/synquacer-sc2a11-developerbox-u-boot.dtsi  |   49 ++++++++++++++++++++
 board/socionext/developerbox/developerbox.c        |   15 ++++++
 configs/synquacer_developerbox_defconfig           |   11 ++--
 drivers/net/sni_netsec.c                           |    7 ---
 include/configs/synquacer.h                        |    2 -
 5 files changed, 70 insertions(+), 14 deletions(-)

--
Masami Hiramatsu <masami.hiramatsu at linaro.org>


More information about the U-Boot mailing list