[PATCH v2 0/9] phyCORE-i.MX8MP Update

[Fabio Estevam]

Hi Teresa,

On Fri, Jul 2, 2021 at 8:19 AM Teresa Remmet <t.remmet at phytec.de> wrote:
>
> Hello,
>
> this is the second version of the phyCORE-i.MX8MP updates. This
> includes also an update of imx8mp.dtsi from kernel and the introduction of a
> common imx8mp-u-boot.dtsi.
>
> Changes in v2:
> [5/9]
>         - removed hardcoded serverip in environment
>         - removed not needed fec eth defines in board config include
>
> Teresa
>
> Teresa Remmet (9):
>   arm: dts: imx8mp: Resync imx8mp device tree include
>   arm: dts: imx8mp: Add common u-boot dtsi
>   arm: dts: imx8mp-phyboard-pollux: Sync dts files with kernel
>   board: phytec: phycore_imx8mp: Change debug UART
>   board: phytec: phycore_imx8mp: Add fec support
>   board: phytec: phycore_imx8mp: Set VDD_ARM to 0,95V
>   board: phytec: phycore-imx8mp: Enable DVS1 control
>   arm: dts: imx8mp-phyboard-pollux-rdk-u-boot: Add wdog pinctrl entry
>   board: phytec: imx8mp-phycore: Switch to binman

For the series:

Reviewed-by: Fabio Estevam <festevam at gmail.com>