[PATCH] configs: libretech: set SPI mode to 0

[Neil Armstrong]

On 02/07/2021 23:11, Da Xue wrote:
> Kconfig defaults to mode 3 if CONFIG_SF_DEFAULT_MODE is not set.
> It becomes an issue since meson_spifc does not support SPI_CPHA.
> Needed after commit e2e95e5e25421fbef499e21bf94a5339701f9a99.
> 
> Signed-off-by:Da Xue <da at libre.computer>
> ---
>  configs/libretech-ac_defconfig       | 1 +
>  configs/libretech-cc_v2_defconfig    | 1 +
>  configs/libretech-s905d-pc_defconfig | 1 +
>  configs/libretech-s912-pc_defconfig  | 1 +
>  4 files changed, 4 insertions(+)
> 
> diff --git a/configs/libretech-ac_defconfig b/configs/libretech-ac_defconfig
> index ec51f2ad38..9abbcad3c0 100644
> --- a/configs/libretech-ac_defconfig
> +++ b/configs/libretech-ac_defconfig
> @@ -39,6 +39,7 @@ CONFIG_MMC_MESON_GX=y
>  CONFIG_MTD=y
>  CONFIG_DM_MTD=y
>  CONFIG_DM_SPI_FLASH=y
> +CONFIG_SF_DEFAULT_MODE=0x0
>  CONFIG_SPI_FLASH_GIGADEVICE=y
>  CONFIG_SPI_FLASH_SPANSION=y
>  CONFIG_PHY_MESON_GXL=y
> diff --git a/configs/libretech-cc_v2_defconfig b/configs/libretech-cc_v2_defconfig
> index 97c8a9e47b..7dc6ed2f29 100644
> --- a/configs/libretech-cc_v2_defconfig
> +++ b/configs/libretech-cc_v2_defconfig
> @@ -35,6 +35,7 @@ CONFIG_MMC_MESON_GX=y
>  CONFIG_MTD=y
>  CONFIG_DM_MTD=y
>  CONFIG_DM_SPI_FLASH=y
> +CONFIG_SF_DEFAULT_MODE=0x0
>  CONFIG_SPI_FLASH_GIGADEVICE=y
>  CONFIG_PHY_MESON_GXL=y
>  CONFIG_DM_ETH=y
> diff --git a/configs/libretech-s905d-pc_defconfig b/configs/libretech-s905d-pc_defconfig
> index c0301a0aa0..93523c23cf 100644
> --- a/configs/libretech-s905d-pc_defconfig
> +++ b/configs/libretech-s905d-pc_defconfig
> @@ -36,6 +36,7 @@ CONFIG_SARADC_MESON=y
>  CONFIG_MMC_MESON_GX=y
>  CONFIG_MTD=y
>  CONFIG_DM_SPI_FLASH=y
> +CONFIG_SF_DEFAULT_MODE=0x0
>  CONFIG_SPI_FLASH_GIGADEVICE=y
>  CONFIG_PHY_REALTEK=y
>  CONFIG_DM_ETH=y
> diff --git a/configs/libretech-s912-pc_defconfig b/configs/libretech-s912-pc_defconfig
> index e2faea6242..669f000f7f 100644
> --- a/configs/libretech-s912-pc_defconfig
> +++ b/configs/libretech-s912-pc_defconfig
> @@ -35,6 +35,7 @@ CONFIG_SARADC_MESON=y
>  CONFIG_MMC_MESON_GX=y
>  CONFIG_MTD=y
>  CONFIG_DM_SPI_FLASH=y
> +CONFIG_SF_DEFAULT_MODE=0x0
>  CONFIG_SPI_FLASH_GIGADEVICE=y
>  CONFIG_PHY_REALTEK=y
>  CONFIG_DM_ETH=y
> -- 
> 2.30.2
> 
> 

Thanks,
Applying to u-boot-amlogic & sending PR to have it in this release

Neil