[PATCH 8/9] board: gateworks: venice: add board model to dt
Tim Harvey
tharvey at gateworks.com
Wed Jul 28 00:19:40 CEST 2021
Add the specific board model from EEPROM config to the device-tree to
make it easier to access from Linux userspace.
Signed-off-by: Tim Harvey <tharvey at gateworks.com>
---
board/gateworks/venice/imx8mm_venice.c | 8 ++++++++
configs/imx8mm_venice_defconfig | 1 +
2 files changed, 9 insertions(+)
diff --git a/board/gateworks/venice/imx8mm_venice.c b/board/gateworks/venice/imx8mm_venice.c
index ca01e75d0d..2a97d55d32 100644
--- a/board/gateworks/venice/imx8mm_venice.c
+++ b/board/gateworks/venice/imx8mm_venice.c
@@ -152,3 +152,11 @@ int board_mmc_get_env_dev(int devno)
{
return devno;
}
+
+int ft_board_setup(void *blob, struct bd_info *bd)
+{
+ /* set board model dt prop */
+ fdt_setprop_string(blob, 0, "board", gsc_get_model());
+
+ return 0;
+}
diff --git a/configs/imx8mm_venice_defconfig b/configs/imx8mm_venice_defconfig
index f1efdc60a4..58b00a6813 100644
--- a/configs/imx8mm_venice_defconfig
+++ b/configs/imx8mm_venice_defconfig
@@ -27,6 +27,7 @@ CONFIG_FIT=y
CONFIG_FIT_EXTERNAL_OFFSET=0x3000
CONFIG_SPL_LOAD_FIT=y
CONFIG_SPL_FIT_GENERATOR="arch/arm/mach-imx/mkimage_fit_atf.sh"
+CONFIG_OF_BOARD_SETUP=y
CONFIG_OF_SYSTEM_SETUP=y
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/imx8m/imximage-8mm-lpddr4.cfg"
# CONFIG_USE_BOOTCOMMAND is not set
--
2.17.1
More information about the U-Boot
mailing list