[PATCH 1/2] serial: a37xx: Use CONFIG_BAUDRATE for initializing early debug UART

Pali Rohár pali at kernel.org
Mon Jul 26 14:58:58 CEST 2021


CONFIG_BAUDRATE should be used for setting the baudrate for the early debug
UART. This replaces current hardcoded 115200 value.

Signed-off-by: Pali Rohár <pali at kernel.org>
---
 drivers/serial/serial_mvebu_a3700.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

diff --git a/drivers/serial/serial_mvebu_a3700.c b/drivers/serial/serial_mvebu_a3700.c
index c7e66fef8768..52dc3fdad7b4 100644
--- a/drivers/serial/serial_mvebu_a3700.c
+++ b/drivers/serial/serial_mvebu_a3700.c
@@ -309,7 +309,7 @@ U_BOOT_DRIVER(serial_mvebu) = {
 static inline void _debug_uart_init(void)
 {
 	void __iomem *base = (void __iomem *)CONFIG_DEBUG_UART_BASE;
-	u32 baudrate, parent_rate, divider;
+	u32 parent_rate, divider;
 
 	/* reset FIFOs */
 	writel(UART_CTRL_RXFIFO_RESET | UART_CTRL_TXFIFO_RESET,
@@ -322,9 +322,8 @@ static inline void _debug_uart_init(void)
 	 * Calculate divider
 	 * baudrate = clock / 16 / divider
 	 */
-	baudrate = 115200;
 	parent_rate = get_ref_clk() * 1000000;
-	divider = DIV_ROUND_CLOSEST(parent_rate, baudrate * 16);
+	divider = DIV_ROUND_CLOSEST(parent_rate, CONFIG_BAUDRATE * 16);
 	writel(divider, base + UART_BAUD_REG);
 
 	/*
-- 
2.20.1



More information about the U-Boot mailing list