[PATCH v2 4/8] rtc: davinci: check BUSY bit before set TC registers
Dario Binacchi
dariobin at libero.it
Wed Jun 2 22:38:01 CEST 2021
To write correct data to the TC registers, the STATUS register must be
read until the BUSY bit is equal to zero. Once the BUSY flag is zero,
there is a 15 μs access period in which the TC registers can be
programmed.
The rtc_wait_not_busy() has been inspired by the Kernel.
Signed-off-by: Dario Binacchi <dariobin at libero.it>
---
(no changes since v1)
drivers/rtc/davinci.c | 45 ++++++++++++++++++++++++++++++++++---------
1 file changed, 36 insertions(+), 9 deletions(-)
diff --git a/drivers/rtc/davinci.c b/drivers/rtc/davinci.c
index 99ae31e2a5..7b8c729f3b 100644
--- a/drivers/rtc/davinci.c
+++ b/drivers/rtc/davinci.c
@@ -16,19 +16,39 @@
#define RTC_BASE DAVINCI_RTC_BASE
#endif
-int rtc_get(struct rtc_time *tmp)
+static int davinci_rtc_wait_not_busy(struct davinci_rtc *rtc)
{
- struct davinci_rtc *rtc = (struct davinci_rtc *)RTC_BASE;
- unsigned long sec, min, hour, mday, wday, mon_cent, year;
- unsigned long status;
+ int count;
+ u8 status;
status = readb(&rtc->status);
if ((status & RTC_STATE_RUN) != RTC_STATE_RUN) {
printf("RTC doesn't run\n");
return -1;
}
- if ((status & RTC_STATE_BUSY) == RTC_STATE_BUSY)
- udelay(20);
+
+ /* BUSY may stay active for 1/32768 second (~30 usec) */
+ for (count = 0; count < 50; count++) {
+ if (!(status & RTC_STATE_BUSY))
+ break;
+
+ udelay(1);
+ status = readb(&rtc->status);
+ }
+
+ /* now we have ~15 usec to read/write various registers */
+ return 0;
+}
+
+int rtc_get(struct rtc_time *tmp)
+{
+ struct davinci_rtc *rtc = (struct davinci_rtc *)RTC_BASE;
+ unsigned long sec, min, hour, mday, wday, mon_cent, year;
+ int ret;
+
+ ret = davinci_rtc_wait_not_busy(rtc);
+ if (ret)
+ return ret;
sec = readb(&rtc->second);
min = readb(&rtc->minutes);
@@ -63,10 +83,12 @@ int rtc_get(struct rtc_time *tmp)
int rtc_set(struct rtc_time *tmp)
{
struct davinci_rtc *rtc = (struct davinci_rtc *)RTC_BASE;
+ int ret;
+
+ ret = davinci_rtc_wait_not_busy(rtc);
+ if (ret)
+ return ret;
- debug("Set DATE: %4d-%02d-%02d (wday=%d) TIME: %2d:%02d:%02d\n",
- tmp->tm_year, tmp->tm_mon, tmp->tm_mday, tmp->tm_wday,
- tmp->tm_hour, tmp->tm_min, tmp->tm_sec);
writeb(bin2bcd(tmp->tm_year % 100), &rtc->year);
writeb(bin2bcd(tmp->tm_mon), &rtc->month);
@@ -75,6 +97,11 @@ int rtc_set(struct rtc_time *tmp)
writeb(bin2bcd(tmp->tm_hour), &rtc->hours);
writeb(bin2bcd(tmp->tm_min), &rtc->minutes);
writeb(bin2bcd(tmp->tm_sec), &rtc->second);
+
+ debug("Set DATE: %4d-%02d-%02d (wday=%d) TIME: %2d:%02d:%02d\n",
+ tmp->tm_year, tmp->tm_mon, tmp->tm_mday, tmp->tm_wday,
+ tmp->tm_hour, tmp->tm_min, tmp->tm_sec);
+
return 0;
}
--
2.17.1
More information about the U-Boot
mailing list