June 2021 Archives by subject

• Messages sorted by: [ thread ] [ author ] [ date ]
• More info on this list...

Starting: Tue Jun 1 08:05:52 CEST 2021
Ending: Wed Jun 30 23:43:27 CEST 2021
Messages: 2201

• [[PATCH] colibri_imx6: add board_fit_config_name_match to support FIT in SPL   Ming Liu
• [[PATCH] colibri_imx6: add board_fit_config_name_match to support FIT in SPL   Ming Liu
• [[PATCH] colibri_imx6: add board_fit_config_name_match to support FIT in SPL   Sean Anderson
• [ANN] U-Boot v2021.07-rc4 released   Tom Rini
• [ANN] U-Boot v2021.07-rc5 released   Tom Rini
• [BUG] network is broken on Orange Pi PC   Ramon Fried
• [BUG] network is broken on Orange Pi PC   Heinrich Schuchardt
• [BUG] network is broken on Orange Pi PC   Andre Przywara
• [BUG] network is broken on Orange Pi PC   Heinrich Schuchardt
• [BUG] network is broken on Orange Pi PC   Andre Przywara
• [BUG] network is broken on Orange Pi PC   Heinrich Schuchardt
• [BUG] network is broken on Orange Pi PC   Andre Przywara
• [BUG] network is broken on Orange Pi PC   Andreas Rehn
• [BUG] network is broken on Orange Pi PC   Heinrich Schuchardt
• [BUG] network is broken on Orange Pi PC   Heinrich Schuchardt
• [EXT] Re: [PATCH 2/2] spi: nxp_fspi: Implement errata workaround for LS1028A   Kuldeep Singh
• [GIT PULL] TI changes for v2021.10 next   Lokesh Vutla
• [GIT PULL] TI changes for v2021.10 next   Tom Rini
• [GIT PULL] TI changes for v2021.10 next   Lokesh Vutla
• [GIT PULL] TI changes for v2021.10 next   Tero Kristo
• [GIT PULL] xilinx patches for v2021.07-rc5   Michal Simek
• [GIT PULL] xilinx patches for v2021.07-rc5   Tom Rini
• [GIT PULL] xilinx patches for v2021.07-rc5   Tom Rini
• [GIT PULL v2] TI changes for v2021.10 next   Lokesh Vutla
• [GIT PULL v2] TI changes for v2021.10 next   Tom Rini
• [GIT PULL v2] TI changes for v2021.10 next   Tero Kristo
• [GIT PULL v2] TI changes for v2021.10 next   Vignesh Raghavendra
• [maemo-leste] [PATCH] arm: Remove nokia_rx51 board   Ivaylo Dimitrov
• [maemo-leste] [PATCH] arm: Remove nokia_rx51 board   Tom Rini
• [maemo-leste] [PATCH] arm: Remove nokia_rx51 board   Ivaylo Dimitrov
• [maemo-leste] [PATCH] arm: Remove nokia_rx51 board   Adam Ford
• [maemo-leste] [PATCH] arm: Remove nokia_rx51 board   Pali Rohár
• [maemo-leste] [PATCH] arm: Remove nokia_rx51 board   Tom Rini
• [maemo-leste] [PATCH] arm: Remove nokia_rx51 board   Tom Rini
• [maemo-leste] [PATCH] arm: Remove nokia_rx51 board   Ivaylo Dimitrov
• [maemo-leste] [PATCH] arm: Remove nokia_rx51 board   Ivaylo Dimitrov
• [maemo-leste] [PATCH] arm: Remove nokia_rx51 board   Tom Rini
• [maemo-leste] [PATCH] arm: Remove nokia_rx51 board   Merlijn Wajer
• [maemo-leste] [PATCH] arm: Remove nokia_rx51 board   Ivaylo Dimitrov
• [maemo-leste] [PATCH] arm: Remove nokia_rx51 board   Tom Rini
• [maemo-leste] [PATCH] arm: Remove nokia_rx51 board   Tom Rini
• [maemo-leste] [PATCH] arm: Remove nokia_rx51 board   Pali Rohár
• [maemo-leste] [PATCH] arm: Remove nokia_rx51 board   Tom Rini
• [maemo-leste] [PATCH] arm: Remove nokia_rx51 board   Pali Rohár
• [maemo-leste] [PATCH] arm: Remove nokia_rx51 board   Ivaylo Dimitrov
• [maemo-leste] [PATCH] arm: Remove nokia_rx51 board   Tom Rini
• [PATCH -next] ARM: dts: k3-j7200-common-proc-board-u-boot.dtsi: Fix dtc warnings   Vignesh Raghavendra
• [PATCH -next] ARM: dts: k3-j7200-common-proc-board-u-boot.dtsi: Fix dtc warnings   Lokesh Vutla
• [PATCH -next] ARM: dts: k3-j7200-common-proc-board-u-boot.dtsi: Fix dtc warnings   Tom Rini
• [PATCH -next] ARM: dts: k3-j7200-common-proc-board-u-boot.dtsi: Fix dtc warnings   Tom Rini
• [PATCH 0/2] Add support for 10G/25G to AXI emac driver   Ashok Reddy Soma
• [PATCH 0/2] Add support for 10G/25G to AXI emac driver   Michal Simek
• [PATCH 0/2] Add support for 10G/25G to AXI emac driver   Ramon Fried
• [PATCH 0/2] Add support for 10G/25G to AXI emac driver   Ashok Reddy Soma
• [PATCH 0/2] Add support for 10G/25G to AXI emac driver   Ramon Fried
• [PATCH 0/2] AM64: Update the locations of various elements in SRAM   Aswath Govindraju
• [PATCH 0/2] ARM64: rockchip: evb_rk3399: Khadas Edge add USB OHCI   Artem Lapkin
• [PATCH 0/2] efi_loader: provide file attributes in directory   Heinrich Schuchardt
• [PATCH 0/2] net: smc911x: Determine bus width at runtime   Andre Przywara
• [PATCH 0/3] Add MRMAC driver support   Ashok Reddy Soma
• [PATCH 0/3] cmd: setexpr: add fmt format string operation   Roland Gaudig
• [PATCH 0/3] cmd: setexpr: add fmt format string operation   Wolfgang Denk
• [PATCH 0/3] cmd: setexpr: add fmt format string operation   Roland Gaudig (OSS)
• [PATCH 0/3] cmd: setexpr: add fmt format string operation   Marek Behun
• [PATCH 0/3] cmd: setexpr: add fmt format string operation   Wolfgang Denk
• [PATCH 0/3] cmd: setexpr: add fmt format string operation   Sean Anderson
• [PATCH 0/3] cmd: setexpr: add fmt format string operation   Wolfgang Denk
• [PATCH 0/3] cmd: setexpr: add fmt format string operation   Roland Gaudig (OSS)
• [PATCH 0/3] cmd: setexpr: add fmt format string operation   Sean Anderson
• [PATCH 0/3] cmd: setexpr: add fmt format string operation   Marek Behún
• [PATCH 0/3] Drop CONFIG_FSL_ESDHC_VS33_NOT_SUPPORT   Yangbo Lu
• [PATCH 0/3] J7200: Add support for HS400 speed mode   Lokesh Vutla
• [PATCH 0/3] zynqmp: Add support for secure OS loading   Michal Simek
• [PATCH 0/4] arm64: zynqmp: Update USB and Kria DTs   Michal Simek
• [PATCH 0/4] arm64: zynqmp: Update USB and Kria DTs   Michal Simek
• [PATCH 0/4] board: freescale: add T2080RDB rev D support   Camelia Groza
• [PATCH 0/4] board: freescale: add T2080RDB rev D support   Tom Rini
• [PATCH 0/4] board: freescale: T2080RDB: rev D support and   Camelia Groza
• [PATCH 0/4] Fix CIs skipping filesystem, EFI secure boot and EFI capsule tests   Alper Nebi Yasak
• [PATCH 0/4] sunxi: TOC0 image type support   Samuel Holland
• [PATCH 0/4] sunxi: TOC0 image type support   Andre Przywara
• [PATCH 0/4] sunxi: TOC0 image type support   Tom Rini
• [PATCH 0/4] sunxi: TOC0 image type support   Andre Przywara
• [PATCH 0/4] Zyxel NSA310S NAS : convert to Driver Model   Tony (bodhi)
• [PATCH 0/4] Zyxel NSA310S NAS : convert to Driver Model   Stefan Roese
• [PATCH 0/5] remoteproc: pru: Add remoteproc support for AM65 PRUSS   Lokesh Vutla
• [PATCH 0/6] Add support for Kontron i.MX6UL/ULL and i.MX8MM modules/boards   Frieder Schrempf
• [PATCH 0/6] AM64: Add support for higher speed modes and boot mode in eMMC   Aswath Govindraju
• [PATCH 0/6] arm64: zynqmp: DT syncup patches   Michal Simek
• [PATCH 0/6] arm64: zynqmp: DT syncup patches   Michal Simek
• [PATCH 0/6] Call phy_config at port probe time for the Felix DSA driver   Vladimir Oltean
• [PATCH 0/6] Call phy_config at port probe time for the Felix DSA driver   Michael Walle
• [PATCH 0/6] Fixes for the NXP LS1028A-QDS boards   Vladimir Oltean
• [PATCH 0/6] Support multi-dtb in SPL on Unmatched board   Zong Li
• [PATCH 0/7] arm64: zynqmp: DT syncup   Michal Simek
• [PATCH 0/7] arm64: zynqmp: DT syncup patches next   Michal Simek
• [PATCH 0/7] arm64: zynqmp: DT syncup patches next   Michal Simek
• [PATCH 0/7] efi: Various tidy-ups and drop the default   Simon Glass
• [PATCH 0/7] efi: Various tidy-ups and drop the default   Mark Kettenis
• [PATCH 0/7] efi: Various tidy-ups and drop the default   Ilias Apalodimas
• [PATCH 0/7] efi: Various tidy-ups and drop the default   Tom Rini
• [PATCH 0/7] efi: Various tidy-ups and drop the default   Simon Glass
• [PATCH 0/7] efi: Various tidy-ups and drop the default   Heinrich Schuchardt
• [PATCH 0/7] efi: Various tidy-ups and drop the default   Heinrich Schuchardt
• [PATCH 0/7] efi: Various tidy-ups and drop the default   Simon Glass
• [PATCH 0/7] efi: Various tidy-ups and drop the default   Heinrich Schuchardt
• [PATCH 0/7] efi: Various tidy-ups and drop the default   Tom Rini
• [PATCH 0/7] efi: Various tidy-ups and drop the default   Mark Kettenis
• [PATCH 0/7] efi: Various tidy-ups and drop the default   Simon Glass
• [PATCH 0/7] efi: Various tidy-ups and drop the default   Simon Glass
• [PATCH 0/7] efi: Various tidy-ups and drop the default   AKASHI Takahiro
• [PATCH 0/7] efi: Various tidy-ups and drop the default   Heinrich Schuchardt
• [PATCH 0/7] efi: Various tidy-ups and drop the default   AKASHI Takahiro
• [PATCH 0/7] stm32mp: cmd_stm32key: updates   Patrick Delaunay
• [PATCH 00/10] AM642-EVM: Add USB support   Aswath Govindraju
• [PATCH 00/10] AM642-EVM: Add USB support   Aswath Govindraju
• [PATCH 00/10] AM642-EVM: Add USB support   Lokesh Vutla
• [PATCH 00/10] AM642-EVM: Add USB support   Aswath Govindraju
• [PATCH 00/12] Random Fixes for the CHIP Pro   Maxime Ripard
• [PATCH 00/17] arm: k3-j721e: Add support for J721E EAIK   Sinthu Raja
• [PATCH 01/10] tools: k3_fit_atf: Add support for providing ATF load address using a Kconfig symbol   Aswath Govindraju
• [PATCH 01/10] tools: k3_fit_atf: Add support for providing ATF load address using a Kconfig symbol   Lokesh Vutla
• [PATCH 01/10] tools: k3_fit_atf: Add support for providing ATF load address using a Kconfig symbol   Aswath Govindraju
• [PATCH 01/11] imx: ventana: remove USB_KEYBOARD support   Tim Harvey
• [PATCH 01/12] Revert "sunxi: spl: remove DMA related settings of the NAND controller"   Maxime Ripard
• [PATCH 01/17] common: make: Support show_board_info() as part of SPL build   Sinthu Raja
• [PATCH 02/10] arm: mach-k3: am642_init: Add support for USB boot mode   Aswath Govindraju
• [PATCH 02/11] imx: ventana: remove unneeded includes   Tim Harvey
• [PATCH 02/12] Revert "spl: nand: sunxi: use PIO instead of DMA"   Maxime Ripard
• [PATCH 02/17] drivers: power: pmic: Add support for tps659412 PMIC   Sinthu Raja
• [PATCH 02/17] drivers: power: pmic: Add support for tps659412 PMIC   Jaehoon Chung
• [PATCH 03/10] arm: mach-k3: am642_init: Do USB fixups to facilitate host and device boot modes   Aswath Govindraju
• [PATCH 03/11] imx: ventana: increase SYS_BOOTM_LEN   Tim Harvey
• [PATCH 03/12] Revert "usb: gadget: fastboot: use correct max packet size"   Maxime Ripard
• [PATCH 03/12] Revert "usb: gadget: fastboot: use correct max packet size"   Sean Anderson
• [PATCH 03/12] Revert "usb: gadget: fastboot: use correct max packet size"   Maxime Ripard
• [PATCH 03/12] Revert "usb: gadget: fastboot: use correct max packet size"   Peng Fan (OSS)
• [PATCH 03/17] drivers: power: regulator: tps65941_regulator: Add support for 3Phase buck   Sinthu Raja
• [PATCH 03/17] drivers: power: regulator: tps65941_regulator: Add support for 3Phase buck   Jaehoon Chung
• [PATCH 04/10] board: ti: am64x: Set the core voltage of USB PHY to 0.85V   Aswath Govindraju
• [PATCH 04/11] imx: ventana: add legacy uboot image support   Tim Harvey
• [PATCH 04/12] Kconfig: Migrate SPL_PANIC_ON_RAW_IMAGE   Maxime Ripard
• [PATCH 04/17] board: ti: j721e: Guard functions with right #ifdef to avoid build warnings   Sinthu Raja
• [PATCH 05/10] arm: dts: k3-am64-main: Add USB DT nodes   Aswath Govindraju
• [PATCH 05/11] imx: ventana: add PMIC fix for GW54xx-G   Tim Harvey
• [PATCH 05/12] mtd: Allow for a longer mtdparts table   Maxime Ripard
• [PATCH 05/17] board: ti: j721e: Enable support for reading EEPROM at next alternate address   Sinthu Raja
• [PATCH 06/10] arm: dts: k3-am642-*-evm: Add USB support   Aswath Govindraju
• [PATCH 06/11] imx: ventana: put PFUZ100 regulators in continuous mode   Tim Harvey
• [PATCH 06/12] fastboot: Add missing newlines   Maxime Ripard
• [PATCH 06/12] fastboot: Add missing newlines   Andre Przywara
• [PATCH 06/17] board: ti: j721e: Add support to update board_name for j721e-eaik   Sinthu Raja
• [PATCH 06/18] image: Drop IMAGE_ENABLE_SHA1   Simon Glass
• [PATCH 07/10] arm: dts: k3-am642-evm-u-boot: Add U-Boot tags and fix the dr_mode to peripheral for USB subsystem   Aswath Govindraju
• [PATCH 07/11] imx: ventana: put LTC3676 regulators in continuous mode   Tim Harvey
• [PATCH 07/12] configs: chip pro: Disable video output   Maxime Ripard
• [PATCH 07/12] configs: chip pro: Disable video output   Andre Przywara
• [PATCH 07/17] board: ti: j721e: Disable probing of daughtercards   Sinthu Raja
• [PATCH 08/10] configs: am64x_evm_*_defconfig: Move the SPL Load address to 0x70000000, move the ATF to a latter location and rearrange EEPROM and BSS data   Aswath Govindraju
• [PATCH 08/11] imx: ventana: add DP83867 PHY LED configuration   Tim Harvey
• [PATCH 08/12] clk: sunxi: Add missing clock compatible   Maxime Ripard
• [PATCH 08/12] clk: sunxi: Add missing clock compatible   Andre Przywara
• [PATCH 08/17] board: ti: j721e: Add support for detecting multiple device trees   Sinthu Raja
• [PATCH 09/10] arm: dts: k3-am64-main: Update the location of ATF in SRAM   Aswath Govindraju
• [PATCH 09/11] imx: ventana: display neteowrk PHY   Tim Harvey
• [PATCH 09/12] fastboot: nand: Fix return error code   Maxime Ripard
• [PATCH 09/12] fastboot: nand: Fix return error code   Andre Przywara
• [PATCH 09/17] arm: j721e: Add support for selecting DT based on EEPROM   Sinthu Raja
• [PATCH 1/1] arm64: mvebu: correct Armada 8K addresses   Heinrich Schuchardt
• [PATCH 1/1] arm64: mvebu: correct Armada 8K addresses   Stefan Roese
• [PATCH 1/1] arm64: mvebu: correct Armada 8K addresses   Stefan Roese
• [PATCH 1/1] efi_loader: efi_capsule_delete_file() NULL dereference   Heinrich Schuchardt
• [PATCH 1/1] efi_loader: fix set_capsule_result()   Heinrich Schuchardt
• [PATCH 1/1] efi_loader: fix set_capsule_result()   Ilias Apalodimas
• [PATCH 1/1] efi_loader: fix set_capsule_result()   AKASHI Takahiro
• [PATCH 1/1] efi_loader: fix Sphinx warning   Heinrich Schuchardt
• [PATCH 1/1] efi_loader: fix Sphinx warning   Masahisa Kojima
• [PATCH 1/1] efi_loader: improve block device integration with DM   Heinrich Schuchardt
• [PATCH 1/1] efi_loader: improve block device integration with DM   Matwey V. Kornilov
• [PATCH 1/1] efi_loader: improve block device integration with DM   Simon Glass
• [PATCH 1/1] efi_loader: missing parentheses in query_console_size   Heinrich Schuchardt
• [PATCH 1/1] efi_loader: TPL_HIGH_LEVEL not allowed for CreateEvent   Heinrich Schuchardt
• [PATCH 1/1] efi_loader: TPL_HIGH_LEVEL not allowed for CreateEvent   Samer El-Haj-Mahmoud
• [PATCH 1/1] efidebug: correct display of BootOrder   Heinrich Schuchardt
• [PATCH 1/1] lib: move rtc-lib.c to lib   Heinrich Schuchardt
• [PATCH 1/1] lib: move rtc-lib.c to lib   Bin Meng
• [PATCH 1/1] lib: move rtc-lib.c to lib   Pali Rohár
• [PATCH 1/1] lib: move rtc-lib.c to lib   Simon Glass
• [PATCH 1/1] malloc: add SPDX license identifiers   Tom Rini
• [PATCH 1/1] net: sun8i-emac: fix MDIO frequency   Heinrich Schuchardt
• [PATCH 1/1] net: sun8i-emac: fix MDIO frequency   Ramon Fried
• [PATCH 1/1] net: sun8i-emac: fix MDIO frequency   Ramon Fried
• [PATCH 1/1] sandbox: correct determination of the text base   Simon Glass
• [PATCH 1/1] smbios: convert function descriptions to Sphinx style   Heinrich Schuchardt
• [PATCH 1/1] test: NULL dereference in test-uclass   Heinrich Schuchardt
• [PATCH 1/2] ARM64: rockchip: evb_rk3399: add usb ohci definations   Artem Lapkin
• [PATCH 1/2] ARM64: rockchip: evb_rk3399: add usb ohci definations   Kever Yang
• [PATCH 1/2] arm: snapdragon: Use correct GICC register on APQ8016   Sheep Sun
• [PATCH 1/2] clk: stm32mp1: add support of SYSCFG clock   Patrick Delaunay
• [PATCH 1/2] configs: am64x_evm_a53_defconfig: Move TF-A load address to 0x701c4000   Aswath Govindraju
• [PATCH 1/2] DM_USB: allow building without OF_CONTROL   Pali Rohár
• [PATCH 1/2] DM_USB: allow building without OF_CONTROL   Tom Rini
• [PATCH 1/2] DM_USB: allow building without OF_CONTROL   Marek Vasut
• [PATCH 1/2] DM_USB: allow building without OF_CONTROL   Ivaylo Dimitrov
• [PATCH 1/2] DM_USB: allow building without OF_CONTROL   Marek Vasut
• [PATCH 1/2] DM_USB: allow building without OF_CONTROL   Ivaylo Dimitrov
• [PATCH 1/2] DM_USB: allow building without OF_CONTROL   Marek Vasut
• [PATCH 1/2] DM_USB: allow building without OF_CONTROL   Ivaylo Dimitrov
• [PATCH 1/2] DM_USB: allow building without OF_CONTROL   Tom Rini
• [PATCH 1/2] DM_USB: allow building without OF_CONTROL   Marek Vasut
• [PATCH 1/2] DM_USB: allow building without OF_CONTROL   Tom Rini
• [PATCH 1/2] DM_USB: allow building without OF_CONTROL   Marek Vasut
• [PATCH 1/2] DM_USB: allow building without OF_CONTROL   Tom Rini
• [PATCH 1/2] DM_USB: allow building without OF_CONTROL   Pali Rohár
• [PATCH 1/2] DM_USB: allow building without OF_CONTROL   Simon Glass
• [PATCH 1/2] DM_USB: allow building without OF_CONTROL   Pali Rohár
• [PATCH 1/2] DM_USB: allow building without OF_CONTROL   Simon Glass
• [PATCH 1/2] DM_USB: allow building without OF_CONTROL   Pali Rohár
• [PATCH 1/2] DM_USB: allow building without OF_CONTROL   Ivaylo Dimitrov
• [PATCH 1/2] DM_USB: allow building without OF_CONTROL   Tom Rini
• [PATCH 1/2] DM_USB: allow building without OF_CONTROL   Pali Rohár
• [PATCH 1/2] DM_USB: allow building without OF_CONTROL   Tom Rini
• [PATCH 1/2] DM_USB: allow building without OF_CONTROL   Merlijn Wajer
• [PATCH 1/2] DM_USB: allow building without OF_CONTROL   Tom Rini
• [PATCH 1/2] DM_USB: allow building without OF_CONTROL   Simon Glass
• [PATCH 1/2] DM_USB: allow building without OF_CONTROL   Tom Rini
• [PATCH 1/2] DM_USB: allow building without OF_CONTROL   Simon Glass
• [PATCH 1/2] DM_USB: allow building without OF_CONTROL   Tom Rini
• [PATCH 1/2] DM_USB: allow building without OF_CONTROL   Ivaylo Dimitrov
• [PATCH 1/2] DM_USB: allow building without OF_CONTROL   Ivaylo Dimitrov
• [PATCH 1/2] DM_USB: allow building without OF_CONTROL   Tom Rini
• [PATCH 1/2] DM_USB: allow building without OF_CONTROL   Ivaylo Dimitrov
• [PATCH 1/2] DM_USB: allow building without OF_CONTROL   Tom Rini
• [PATCH 1/2] DM_USB: allow building without OF_CONTROL   Simon Glass
• [PATCH 1/2] fs: fat: add file attributes to struct fs_dirent   Heinrich Schuchardt
• [PATCH 1/2] i2c: pcf8575: Remove not used members of pcf8575_chip structure   Lukasz Majewski
• [PATCH 1/2] i2c: pcf8575: Remove not used members of pcf8575_chip structure   Heiko Schocher
• [PATCH 1/2] net: smc911x: Drop redundant CONFIG_SMC911X_16_BIT Kconfig symbol   Andre Przywara
• [PATCH 1/2] net: smc911x: Drop redundant CONFIG_SMC911X_16_BIT Kconfig symbol   Ramon Fried
• [PATCH 1/2] net: smc911x: Drop redundant CONFIG_SMC911X_16_BIT Kconfig symbol   Ramon Fried
• [PATCH 1/2] net: xilinx: axi_emac: Cleanup of of_to_plat()   Ashok Reddy Soma
• [PATCH 1/2] net: xilinx: axi_emac: Cleanup of of_to_plat()   Ramon Fried
• [PATCH 1/2] Nokia RX-51: Add support for booting kernel in zImage format   Pali Rohár
• [PATCH 1/2] nvme: Move block dev creation from uclass post probe to driver probe   Bin Meng
• [PATCH 1/2] reset: Do not return NULL on error for devm_reset_control_get_optional()   Pratyush Yadav
• [PATCH 1/2] reset: Do not return NULL on error for devm_reset_control_get_optional()   Simon Glass
• [PATCH 1/2] test/py: Use loop mounts if guestmount fails in filesystem tests   Alper Nebi Yasak
• [PATCH 1/2] test/py: Use loop mounts if guestmount fails in filesystem tests   Simon Glass
• [PATCH 1/2] test/py: Use loop mounts if guestmount fails in filesystem tests   Alper Nebi Yasak
• [PATCH 1/2] usb: ehci-mx6: Move fdtdec_get_alias_seq() inside the CONFIG_MX6   Fabio Estevam
• [PATCH 1/2] w1: w1-gpio: claim the gpio with correct initial flag   Eugen Hristev
• [PATCH 1/2 v3] Add out4.ru O4-iMX-NANO board   sbabic at denx.de
• [PATCH 1/3] ARM: dts: imxrt1050-evk: move all u-boot, dm-spl to imxrt1050-evk-u-boot.dtsi file   sbabic at denx.de
• [PATCH 1/3] board: freescale: LX2160ARDB: Add MAINTAINER   Wasim Khan
• [PATCH 1/3] cmd: setexpr: add fmt format string operation   Roland Gaudig
• [PATCH 1/3] cmd: setexpr: add fmt format string operation   Rasmus Villemoes
• [PATCH 1/3] cmd: setexpr: add fmt format string operation   Wolfgang Denk
• [PATCH 1/3] cmd: setexpr: add fmt format string operation   Wolfgang Denk
• [PATCH 1/3] imx8mm: configs: enable distro default features   ZHIZHIKIN Andrey
• [PATCH 1/3] imx8mm: configs: enable distro default features   Stefano Babic
• [PATCH 1/3] imx8mm: configs: enable distro default features   Stefano Babic
• [PATCH 1/3] imx8mm: configs: enable distro default features   ZHIZHIKIN Andrey
• [PATCH 1/3] mmc: fsl_esdhc: convert to CONFIG_FSL_ESDHC_VS33_NOT_SUPPORT   Yangbo Lu
• [PATCH 1/3] net: ethtool: Add ethernet speed macros for higher speeds   Ashok Reddy Soma
• [PATCH 1/3] net: ethtool: Add ethernet speed macros for higher speeds   Simon Glass
• [PATCH 1/3] net: ethtool: Add ethernet speed macros for higher speeds   Ramon Fried
• [PATCH 1/3] Revert "sama5d3: Fix Galois Field Table offsets"   Eugen.Hristev at microchip.com
• [PATCH 1/3] smegw01: Allow booting the Yocto image by default   Fabio Estevam
• [PATCH 1/3] smegw01: Allow booting the Yocto image by default   Tom Rini
• [PATCH 1/3] usb: ehci-mx6: move mode set/detect to probe   Tim Harvey
• [PATCH 1/3 v2] efi: Fix to use null handle to create new handle for efi_fmp_raw   Ilias Apalodimas
• [PATCH 1/3 v2] efi: Fix to use null handle to create new handle for efi_fmp_raw   Heinrich Schuchardt
• [PATCH 1/3 v2] efi: Fix to use null handle to create new handle for efi_fmp_raw   Masami Hiramatsu
• [PATCH 1/3 v2] efi: Fix to use null handle to create new handle for efi_fmp_raw   Ilias Apalodimas
• [PATCH 1/3 v3] efi: Fix to use null handle to create new handle for efi_fmp_raw   Ilias Apalodimas
• [PATCH 1/4] arm64: zynqmp: Remove revA compatibility string from kv260 revB/1   Michal Simek
• [PATCH 1/4] arm: dts: am335x-boneblack: Extract common config   Paul Barker
• [PATCH 1/4] arm: dts: am335x-boneblack: Extract common config   Peter Robinson
• [PATCH 1/4] arm: dts: am335x-boneblack: Extract common config   Paul Barker
• [PATCH 1/4] arm: dts: am335x-boneblack: Extract common config   Peter Robinson
• [PATCH 1/4] arm: dts: am335x-boneblack: Extract common config   Paul Barker
• [PATCH 1/4] arm: dts: am335x-boneblack: Extract common config   Tom Rini
• [PATCH 1/4] board: freescale: t208xrdb: detect the board revision letter   Camelia Groza
• [PATCH 1/4] board: freescale: t4rdb: Add MAINTAINER   Priyanka Jain
• [PATCH 1/4] phy-sun4i-usb: Fix sun8i_r40_cfg   qianfanguijin at 163.com
• [PATCH 1/4] phy-sun4i-usb: Fix sun8i_r40_cfg   Andre Przywara
• [PATCH 1/4] phy-sun4i-usb: Fix sun8i_r40_cfg   qianfan
• [PATCH 1/4] powerpc: Don't use relative include for config.h in global_data.h   Tom Rini
• [PATCH 1/4] powerpc: Don't use relative include for config.h in global_data.h   Matt Merhar
• [PATCH 1/4] powerpc: Don't use relative include for config.h in global_data.h   Tom Rini
• [PATCH 1/4] tools: docker: Install a readable kernel for libguestfs-tools   Alper Nebi Yasak
• [PATCH 1/4] tools: docker: Install a readable kernel for libguestfs-tools   Heinrich Schuchardt
• [PATCH 1/4] tools: docker: Install a readable kernel for libguestfs-tools   AKASHI Takahiro
• [PATCH 1/4] tools: Refactor mkimage linking with OpenSSL   Samuel Holland
• [PATCH 1/4] tools: Refactor mkimage linking with OpenSSL   Simon Glass
• [PATCH 1/5] arm: dts: stm32mp157c-odyssey-som: fix the basic SDMMC2 properties   Patrice CHOTARD
• [PATCH 1/5] lib/vsprintf.c: make sure vsnprintf() never returns a negative value   Simon Glass
• [PATCH 1/5] riscv: ae350: dts: Add SPDX license header   Bin Meng
• [PATCH 1/5] riscv: ae350: dts: Add SPDX license header   Bin Meng
• [PATCH 1/5] riscv: ae350: dts: Add SPDX license header   Leo Liang
• [PATCH 1/5] riscv: ae350: dts: Add SPDX license header   Rick Chen
• [PATCH 1/5] soc: ti: pruss: Add a platform driver for PRUSS in TI SoCs   Lokesh Vutla
• [PATCH 1/6] arch: arm: mach-k3: am642_init: Correct the function name spl_boot_mode() to spl_mmc_boot_mode()   Aswath Govindraju
• [PATCH 1/6] arm64: zynqmp: Remove additional header from zc1232 DT   Michal Simek
• [PATCH 1/6] arm: dts: ls1028a: enable the switch CPU port for the LS1028A-QDS   Vladimir Oltean
• [PATCH 1/6] ARM: IMXRT: introduce is_imxrt*() macros and get_cpu_rev()   sbabic at denx.de
• [PATCH 1/6] board: sifive: unmatched: add initial support for a platform ID EEPROM   Zong Li
• [PATCH 1/6] mtd: spi-nor-ids: Add support for Macronix MX25V8035F and MX25R1635F   Frieder Schrempf
• [PATCH 1/6] net: dsa: felix: felix_init() can be static   Vladimir Oltean
• [PATCH 1/6] net: dsa: felix: felix_init() can be static   Ramon Fried
• [PATCH 1/7] arm64: zynqmp: rtc: Update rtc calibration value   Michal Simek
• [PATCH 1/7] configs: Resync with savedefconfig   Simon Glass
• [PATCH 1/7] stm32mp: configs: activate the command stm32key only for ST boards   Patrick Delaunay
• [PATCH 1/8] board/km: add support for expu1 design based on nxp   Aleksandar Gerasimovski
• [PATCH 10/10] configs: am64: Enable configs to support USB host and device modes   Aswath Govindraju
• [PATCH 10/10] stm32mp: stm32prog: handle dfu error   Patrice CHOTARD
• [PATCH 10/11] imx: ventana: add support for DLC0700XDP21LF LCD display   Tim Harvey
• [PATCH 10/12] configs: chip pro: Disable UMS   Maxime Ripard
• [PATCH 10/17] arm: dts: k3-j721e-r5-common-proc-board: Do not use power-domains for I2C   Sinthu Raja
• [PATCH 11/11] imx: ventana: display 'none' for MMC if board does not have it   Tim Harvey
• [PATCH 11/12] configs: chip pro: fix the offsets   Maxime Ripard
• [PATCH 11/17] arm: dts: k3-j721e-eaik: Add initial A72 specific dts support   Sinthu Raja
• [PATCH 12/12] configs: chip pro: Fix NAND Controller name   Maxime Ripard
• [PATCH 12/17] arm: dts: k3-j721e-r5-eaik: Add initial R5 specific dts support for j721e-eaik   Sinthu Raja
• [PATCH 13/17] configs: j721e_evm_r5: Enable support for building multiple dtbs into FIT   Sinthu Raja
• [PATCH 14/17] configs: j721e_evm_a72: Add EAIK dtb as part of DTB FIT   Sinthu Raja
• [PATCH 15/17] configs: j721e_evm_a72: Align OSPI partitions on erase block boundary   Sinthu Raja
• [PATCH 16/17] configs: j721e_evm: Store env in MMC FAT partition   Sinthu Raja
• [PATCH 17/17] include: configs: Update env for selecting right dtb   Sinthu Raja
• [PATCH 2/2] ARM: dts: at91: fix the GPIO polarity for onewire   Eugen Hristev
• [PATCH 2/2] arm: dts: k3-am64-main: Indicate the memory reserved for DMSC-lite code and secure proxy communication buffer   Aswath Govindraju
• [PATCH 2/2] arm: snapdragon: Fix typo in clk_bcr_update()   Sheep Sun
• [PATCH 2/2] configs: rockchip: rk3399: Khadas Edge add USB OHCI   Artem Lapkin
• [PATCH 2/2] configs: rockchip: rk3399: Khadas Edge add USB OHCI   Kever Yang
• [PATCH 2/2] efi_loader: provide file attributes in EFI_FILE_PROTOCOL.Read()   Heinrich Schuchardt
• [PATCH 2/2] i2c: pcf8575: Add support for 8 bit I2C IO expanders (like pca8574)   Lukasz Majewski
• [PATCH 2/2] i2c: pcf8575: Add support for 8 bit I2C IO expanders (like pca8574)   Heiko Schocher
• [PATCH 2/2] net: smc911x: Determine bus width at runtime   Andre Przywara
• [PATCH 2/2] net: smc911x: Determine bus width at runtime   Ramon Fried
• [PATCH 2/2] net: smc911x: Determine bus width at runtime   Ramon Fried
• [PATCH 2/2] net: xilinx: axi_emac: Add support for 10G/25G AXI ethernet   Ashok Reddy Soma
• [PATCH 2/2] net: xilinx: axi_emac: Add support for 10G/25G AXI ethernet   Ramon Fried
• [PATCH 2/2] Nokia RX-51: Enable CONFIG_DM_USB to remove deprecation warning   Pali Rohár
• [PATCH 2/2] Nokia RX-51: Enable CONFIG_DM_USB to remove deprecation warning   Simon Glass
• [PATCH 2/2] Nokia RX-51: Load bootmenu also from uSD card   Pali Rohár
• [PATCH 2/2] nvme: Skip block device creation for inactive namespaces   Bin Meng
• [PATCH 2/2] stm32mp: syscon: manage clock when present in device tree   Patrick Delaunay
• [PATCH 2/2] test/py: Wait for guestmount worker to exit after running guestunmount   Alper Nebi Yasak
• [PATCH 2/2] test/py: Wait for guestmount worker to exit after running guestunmount   Simon Glass
• [PATCH 2/2] test/py: Wait for guestmount worker to exit after running guestunmount   Alper Nebi Yasak
• [PATCH 2/2] usb: ehci-mx6: Do not fail when 'reg' is not found   Fabio Estevam
• [PATCH 2/2] usb: ehci-mx6: Do not fail when 'reg' is not found   Pierre-Jean Texier
• [PATCH 2/2] usb: ehci-mx6: Do not fail when 'reg' is not found   Fabio Estevam
• [PATCH 2/2] usb: ehci-mx6: Do not fail when 'reg' is not found   Pierre-Jean Texier
• [PATCH 2/2] usb: ehci-mx6: Do not fail when 'reg' is not found   Marek Vasut
• [PATCH 2/2] usb: ehci-mx6: Do not fail when 'reg' is not found   Fabio Estevam
• [PATCH 2/2 v3] Add EV-iMX280-NANO-X-MB board   sbabic at denx.de
• [PATCH 2/3] ARM: dts: imxrt1020-evk: move all u-boot, dm-spl to imxrt1020-evk-u-boot.dtsi file   sbabic at denx.de
• [PATCH 2/3] board: freescale: LX2160AQDS: Add MAINTAINER   Wasim Khan
• [PATCH 2/3] doc: usage: add description for setexpr command   Roland Gaudig
• [PATCH 2/3] dts: bpi-m2u: Enable USB_OTG by default   qianfanguijin at 163.com
• [PATCH 2/3] mmc: fsl_esdhc_imx: drop CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33   Yangbo Lu
• [PATCH 2/3] net: xilinx: axi_mrmac: Add MRMAC driver   Ashok Reddy Soma
• [PATCH 2/3] net: xilinx: axi_mrmac: Add MRMAC driver   Simon Glass
• [PATCH 2/3] net: xilinx: axi_mrmac: Add MRMAC driver   Ramon Fried
• [PATCH 2/3] net: xilinx: axi_mrmac: Add MRMAC driver   Michal Simek
• [PATCH 2/3] net: xilinx: axi_mrmac: Add MRMAC driver   Ashok Reddy Soma
• [PATCH 2/3] net: xilinx: axi_mrmac: Add MRMAC driver   Ramon Fried
• [PATCH 2/3] net: xilinx: axi_mrmac: Add MRMAC driver   Michal Simek
• [PATCH 2/3] smegw01: Re-sync the defconfig   Fabio Estevam
• [PATCH 2/3] smegw01: Re-sync the defconfig   Tom Rini
• [PATCH 2/3 v2] efi_loader: Force a sinlge FMP instance per hardware store   Ilias Apalodimas
• [PATCH 2/3 v2] efi_loader: Force a sinlge FMP instance per hardware store   Masami Hiramatsu
• [PATCH 2/3 v2] efi_loader: Force a sinlge FMP instance per hardware store   Ilias Apalodimas
• [PATCH 2/3 v3] efi_loader: Force a sinlge FMP instance per hardware store   Ilias Apalodimas
• [PATCH 2/3 v3] efi_loader: Force a sinlge FMP instance per hardware store   Masami Hiramatsu
• [PATCH 2/4] arm64: zynqmp: Use overlay sugar syntax for Kria SOM   Michal Simek
• [PATCH 2/4] arm: dts: am335x-sancloud-bbe: New dtb to support ethernet   Paul Barker
• [PATCH 2/4] Azure: Add fuse device for sandbox test.py tests   Alper Nebi Yasak
• [PATCH 2/4] Azure: Add fuse device for sandbox test.py tests   Tom Rini
• [PATCH 2/4] board: freescale: p1_p2_rdb_pc: Add MAINTAINER   Priyanka Jain
• [PATCH 2/4] board: freescale: t208xrdb: add rev D support for the non-DM_ETH mode   Camelia Groza
• [PATCH 2/4] Revert "powerpc: fix regression in arch_initr_trap()"   Tom Rini
• [PATCH 2/4] Revert "powerpc: fix regression in arch_initr_trap()"   Tom Rini
• [PATCH 2/4] sunxi_musb: Add musb configurations of sun8i-r40   qianfanguijin at 163.com
• [PATCH 2/4] sunxi_musb: Add musb configurations of sun8i-r40   Andre Przywara
• [PATCH 2/4] tools: mkimage: Add Allwinner TOC0 support   Samuel Holland
• [PATCH 2/4] tools: mkimage: Add Allwinner TOC0 support   Andre Przywara
• [PATCH 2/5] arm: dts: stm32mp157c-odyssey-som: enable all SDMMC2 data lanes   Patrice CHOTARD
• [PATCH 2/5] remoteproc: pru: Add support for various PRU cores on K3 AM65x SoCs   Lokesh Vutla
• [PATCH 2/5] riscv: ae350: dts: Remove the unnecessary space in bootargs   Bin Meng
• [PATCH 2/5] riscv: ae350: dts: Remove the unnecessary space in bootargs   Rick Chen
• [PATCH 2/5] riscv: ae350: dts: Remove the unnecessary space in bootargs   Leo Liang
• [PATCH 2/6] arch: dts: am642-sk-u-boot: Disable main_sdhci0 DT node and define alias index 1 for main_sdhci1 node   Aswath Govindraju
• [PATCH 2/6] arm64: zynqmp: Add maximum-speed property for dwc3 nodes   Michal Simek
• [PATCH 2/6] arm: dts: ls1028a: enable internal RGMII delays for the LS1028A-QDS AR8035 PHY   Vladimir Oltean
• [PATCH 2/6] clk: imx: clk-imxrt1050: introduce IMXRT1050_CLK_USBOH3   sbabic at denx.de
• [PATCH 2/6] net: dsa: use "err" instead of "ret" in dsa_port_probe   Vladimir Oltean
• [PATCH 2/6] net: dsa: use "err" instead of "ret" in dsa_port_probe   Ramon Fried
• [PATCH 2/6] riscv: sifive: fu740: kconfig: Enable support for Opencores I2C controller   Zong Li
• [PATCH 2/6] spi: fsl_qspi: Build driver only if DM_SPI is available   Frieder Schrempf
• [PATCH 2/7] Makefile: Drop include/asm directory as well as symlink   Simon Glass
• [PATCH 2/7] stm32mp: cmd_stm32key: use sub command   Patrick Delaunay
• [PATCH 2/7] xilinx: Convert xlnx,eeprom property to nvmem alias   Michal Simek
• [PATCH 2/8] km/ls102xa: add support for u-boot POST memory test   Aleksandar Gerasimovski
• [PATCH 25/27] ppc: Remove T4160RDB board   Priyanka Jain
• [PATCH 25/27] ppc: Remove T4160RDB board   Tom Rini
• [PATCH 3/3] ARM: dts: imxrt1020: add gpio5 node to this SoC   sbabic at denx.de
• [PATCH 3/3] armv8: layerscape: drop CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33   Yangbo Lu
• [PATCH 3/3] board: freescale: LX2162AQDS: Add MAINTAINER   Wasim Khan
• [PATCH 3/3] board: freescale: LX2162AQDS: Add MAINTAINER   Wasim Khan
• [PATCH 3/3] smegw01: Select the CMD_UNZIP option   Fabio Estevam
• [PATCH 3/3] sunxi: defconfig: bpi-m2u: Enable usb gadget and ums by default   qianfanguijin at 163.com
• [PATCH 3/3] test: cmd: setexpr: add tests for format string operations   Roland Gaudig
• [PATCH 3/3] xilinx: versal: Enable Xilinx AXI MRMAC   Ashok Reddy Soma
• [PATCH 3/3] xilinx: versal: Enable Xilinx AXI MRMAC   Simon Glass
• [PATCH 3/3 v2] efi_loader: Always install FMPs   Ilias Apalodimas
• [PATCH 3/3 v3] efi_loader: Always install FMPs   Ilias Apalodimas
• [PATCH 3/4] arm64: zynqmp: Update usb dwc3 DT description   Michal Simek
• [PATCH 3/4] Azure: Add loop devices and CAP_SYS_ADMIN for sandbox test.py tests   Alper Nebi Yasak
• [PATCH 3/4] board: freescale: p2041rdb: Add MAINTAINER   Priyanka Jain
• [PATCH 3/4] board: freescale: p2041rdb: Add MAINTAINER   Sinan Akman
• [PATCH 3/4] board: freescale: t208xrdb: add Linux fdt fixups for rev D   Camelia Groza
• [PATCH 3/4] configs: am335x_evm: Support GbE PHYs   Paul Barker
• [PATCH 3/4] dts: bpi-m2u: Enable USB_OTG by default   qianfanguijin at 163.com
• [PATCH 3/4] dts: bpi-m2u: Enable USB_OTG by default   Andre Przywara
• [PATCH 3/4] socfpga64: Do not define CONFIG_SYS_MEM_RESERVE_SECURE to 0   Tom Rini
• [PATCH 3/4] socfpga64: Do not define CONFIG_SYS_MEM_RESERVE_SECURE to 0   Rasmus Villemoes
• [PATCH 3/4] socfpga64: Do not define CONFIG_SYS_MEM_RESERVE_SECURE to 0   Tom Rini
• [PATCH 3/4] socfpga64: Do not define CONFIG_SYS_MEM_RESERVE_SECURE to 0   Tom Rini
• [PATCH 3/4] sunxi: Support both SPL image types   Samuel Holland
• [PATCH 3/5] arm: dts: k3-am654-base-board: Add r5 specific u-boot dtsi   Lokesh Vutla
• [PATCH 3/5] arm: dts: stm32mp157c-odyssey-som: set the SDMMC2 VQMMC supply   Patrice CHOTARD
• [PATCH 3/5] riscv: ae350: dts: Remove the unnecessary #address-cells in plic nodes   Bin Meng
• [PATCH 3/5] riscv: ae350: dts: Remove the unnecessary #address-cells in plic nodes   Rick Chen
• [PATCH 3/5] riscv: ae350: dts: Remove the unnecessary #address-cells in plic nodes   Leo Liang
• [PATCH 3/6] arm64: zynqmp: Remove addition newline from zc1751 dc1   Michal Simek
• [PATCH 3/6] arm: dts: ls1028a: declare the fixed-link speeds for the internal ENETC ports   Vladimir Oltean
• [PATCH 3/6] clk: imx8mm: Add SPI clocks   Frieder Schrempf
• [PATCH 3/6] clk: imx8mm: Add SPI clocks   Lukasz Majewski
• [PATCH 3/6] configs: am64x_evm_a53_defconfig: Enable configs to support HS200/HS400   Aswath Govindraju
• [PATCH 3/6] net: dsa: refactor the code to set the port MAC address into a dedicated function   Vladimir Oltean
• [PATCH 3/6] net: dsa: refactor the code to set the port MAC address into a dedicated function   Ramon Fried
• [PATCH 3/6] riscv: sifive: fu740: Support i2c in spl   Zong Li
• [PATCH 3/6] usb: ehci-mx6: add support for i.MXRT   sbabic at denx.de
• [PATCH 3/7] arm64: zynqmp: Remove si5328 and si5382 nodes   Michal Simek
• [PATCH 3/7] disk: Tidy up #ifdefs in part_efi   Simon Glass
• [PATCH 3/7] disk: Tidy up #ifdefs in part_efi   Heinrich Schuchardt
• [PATCH 3/7] disk: Tidy up #ifdefs in part_efi   Tom Rini
• [PATCH 3/7] disk: Tidy up #ifdefs in part_efi   Heinrich Schuchardt
• [PATCH 3/7] stm32mp: cmd_stm32key: handle error in fuse_hash_value   Patrick Delaunay
• [PATCH 3/8] km: ls102xa: add missing define for PRAM regions   Aleksandar Gerasimovski
• [PATCH 4/4] arm64: zynqmp: Enable USB3.0 for dc2/dc3   Michal Simek
• [PATCH 4/4] Azure/GitLab: Install a readable kernel for libguestfs-tools   Alper Nebi Yasak
• [PATCH 4/4] Azure/GitLab: Install a readable kernel for libguestfs-tools   Heinrich Schuchardt
• [PATCH 4/4] board: freescale: t102xrdb: Add MAINTAINER   Priyanka Jain
• [PATCH 4/4] board: freescale: t208xrdb: add a config option for rev D dts fixups   Camelia Groza
• [PATCH 4/4] configs: am335x_evm: Fix BeagleBone Green DTB selection   Paul Barker
• [PATCH 4/4] global_data: Ensure we have <config.h> when symbols are not in Kconfig yet   Tom Rini
• [PATCH 4/4] global_data: Ensure we have <config.h> when symbols are not in Kconfig yet   Tom Rini
• [PATCH 4/4] sunxi: defconfig: bpi-m2u: Enable usb gadget and ums by default   qianfanguijin at 163.com
• [PATCH 4/4] sunxi: defconfig: bpi-m2u: Enable usb gadget and ums by default   Andre Przywara
• [PATCH 4/4] sunxi: Support building a SPL as a TOC0 image   Samuel Holland
• [PATCH 4/5] arm: dts: stm32mp157c-odyssey-som: enable the SDMMC2 eMMC HS DDR mode   Patrice CHOTARD
• [PATCH 4/5] arm: dts: ti: k3-am65-main: Add ICSSG nodes   Lokesh Vutla
• [PATCH 4/5] riscv: ae350: dts: Fix #interrupt-cells for plic0 in 32-bit   Bin Meng
• [PATCH 4/5] riscv: ae350: dts: Fix #interrupt-cells for plic0 in 32-bit   Rick Chen
• [PATCH 4/5] riscv: ae350: dts: Fix #interrupt-cells for plic0 in 32-bit   Leo Liang
• [PATCH 4/6] arm64: zynqmp: Remove unused dp_aclk clock   Michal Simek
• [PATCH 4/6] ARM: dts: imxrt1050: add usbotg1, usbphy1 and usbmisc nodes   sbabic at denx.de
• [PATCH 4/6] arm: dts: ls1028a: disable enetc-2 by default   Vladimir Oltean
• [PATCH 4/6] board: sifive: Add an interface to get PCB revision   Zong Li
• [PATCH 4/6] configs: am64x_evm: Move CONFIG_SYS_MMC_ENV_DEV and CONFIG_SYS_MMC_ENV_PART to defconfig files and enable configs to save env in eMMC and FAT write.   Aswath Govindraju
• [PATCH 4/6] imx8m: Restrict usable memory to space below 4G boundary   Frieder Schrempf
• [PATCH 4/6] imx8m: Restrict usable memory to space below 4G boundary   Marek Vasut
• [PATCH 4/6] imx8m: Restrict usable memory to space below 4G boundary   Peng Fan (OSS)
• [PATCH 4/6] imx8m: Restrict usable memory to space below 4G boundary   Marek Vasut
• [PATCH 4/6] net: dsa: introduce a .port_probe() method in struct dsa_ops   Vladimir Oltean
• [PATCH 4/6] net: dsa: introduce a .port_probe() method in struct dsa_ops   Ramon Fried
• [PATCH 4/7] arm64: zynqmp: Remove can aliases from zc1751   Michal Simek
• [PATCH 4/7] stm32mp: cmd_stm32key: lock of PKH OTP after fuse   Patrick Delaunay
• [PATCH 4/7] Use LIB_UUID with ACPIGEN and FS_BTRFS   Simon Glass
• [PATCH 4/8] km/scripts: fix saveenv command syntax   Aleksandar Gerasimovski
• [PATCH 5/5] arm: dts: stm32mp157c-odyssey-som: enable SDMMC2 in SPL   Patrice CHOTARD
• [PATCH 5/5] configs: am65x_evm_a53: Enable PRUSS remoteproc   Lokesh Vutla
• [PATCH 5/5] riscv: ae350: dts: Add missing "u-boot, dm-spl" for SPL config   Bin Meng
• [PATCH 5/5] riscv: ae350: dts: Add missing "u-boot,dm-spl" for SPL config   Rick Chen
• [PATCH 5/5] riscv: ae350: dts: Add missing "u-boot,dm-spl" for SPL config   Bin Meng
• [PATCH 5/5] riscv: ae350: dts: Add missing "u-boot,dm-spl" for SPL config   Rick Chen
• [PATCH 5/5] riscv: ae350: dts: Add missing "u-boot,dm-spl" for SPL config   Bin Meng
• [PATCH 5/5] riscv: ae350: dts: Add missing "u-boot,dm-spl" for SPL config   Rick Chen
• [PATCH 5/6] arm64: zynqmp: Sync dp port location on zc1751 dc4   Michal Simek
• [PATCH 5/6] ARM: dts: imxrt1050-evk: enable usbotg1 node as host   sbabic at denx.de
• [PATCH 5/6] configs: am64x_evm_a53_defconfig/am64x_evm_r5_defconfig: Enable configs to support eMMC boot   Aswath Govindraju
• [PATCH 5/6] drivers: net: fsl_enetc: require a PHY device when probing   Vladimir Oltean
• [PATCH 5/6] drivers: net: fsl_enetc: require a PHY device when probing   Ramon Fried
• [PATCH 5/6] imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx)   Frieder Schrempf
• [PATCH 5/6] imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx)   Stefano Babic
• [PATCH 5/6] net: dsa: felix: call phy_config at .port_probe() time   Vladimir Oltean
• [PATCH 5/6] net: dsa: felix: call phy_config at .port_probe() time   Ramon Fried
• [PATCH 5/6] riscv: dts: add dts for unmatched rev1   Zong Li
• [PATCH 5/7] Allow efi_loader header to be included always   Simon Glass
• [PATCH 5/7] Allow efi_loader header to be included always   Heinrich Schuchardt
• [PATCH 5/7] arm64: zynqmp: Remove unused property from SD/USB   Michal Simek
• [PATCH 5/7] stm32mp: cmd_stm32key: add get_misc_dev function   Patrick Delaunay
• [PATCH 5/8] km: ls102x: set ethrotate envvar to no   Aleksandar Gerasimovski
• [PATCH 6/6] arm64: zynqmp: Sync psgtr location on zcu100/zcu106   Michal Simek
• [PATCH 6/6] board: sifive: support spl multi-dtb on unmatched board   Zong Li
• [PATCH 6/6] configs: am64x_evm_*_defconfig: Enable config to support gpt and FDT library overlay   Aswath Govindraju
• [PATCH 6/6] configs: imxrt1050-evk: enable host usb support and its command   sbabic at denx.de
• [PATCH 6/6] drivers: net: fsl_enetc: force the RGMII MAC speed/duplex instead of using in-band signaling   Vladimir Oltean
• [PATCH 6/6] drivers: net: fsl_enetc: force the RGMII MAC speed/duplex instead of using in-band signaling   Ramon Fried
• [PATCH 6/6] imx: imx8mm: Add support for Kontron Electronics SL/BL i.MX8M-Mini boards (N801x)   Frieder Schrempf
• [PATCH 6/6] net: dsa: felix: propagate the error code from phy_startup()   Vladimir Oltean
• [PATCH 6/6] net: dsa: felix: propagate the error code from phy_startup()   Ramon Fried
• [PATCH 6/6] net: sun8i-emac: v3s: fix soft reset timeout   Andre Przywara
• [PATCH 6/6] net: sun8i-emac: v3s: fix soft reset timeout   Heinrich Schuchardt
• [PATCH 6/6] net: sun8i-emac: v3s: fix soft reset timeout   Andreas Rehn
• [PATCH 6/7] arm64: zynqmp: Remove information about dma clock on zcu106   Michal Simek
• [PATCH 6/7] lib: Create a new Kconfig option for charset conversion   Simon Glass
• [PATCH 6/7] lib: Create a new Kconfig option for charset conversion   Heinrich Schuchardt
• [PATCH 6/7] stm32mp: cmd_stm32key: add read OTP subcommand   Patrick Delaunay
• [PATCH 6/8] km: ls102x: update device disable configuration acc hw design desc   Aleksandar Gerasimovski
• [PATCH 7/7] arm64: zynqmp: Sync psgtr location on zcu104/zcu111/zc1751-dc1   Michal Simek
• [PATCH 7/7] efi: Make EBBR optional   Simon Glass
• [PATCH 7/7] efi: Make EBBR optional   Heinrich Schuchardt
• [PATCH 7/7] efi: Make EBBR optional   Tom Rini
• [PATCH 7/7] stm32mp: cmd_stm32key: add subcommand close   Patrick Delaunay
• [PATCH 7/8] pg-wcom-ls102x: initialize front led and app buf   Aleksandar Gerasimovski
• [PATCH 8/8] pg-wcom-ls102xa: fix sys counter frequency   Aleksandar Gerasimovski
• [PATCH] [ZynqMP] Writing correct value to ANALOG_BUS.   Adrian Fiergolski
• [PATCH] [ZynqMP] Writing correct value to ANALOG_BUS.   Michal Simek
• [PATCH] Add udivmoddi4.   Christian Melki
• [PATCH] Add udivmoddi4.   Tom Rini
• [PATCH] Add udivmoddi4.   Christian Melki
• [PATCH] Add udivmoddi4.   Tom Rini
• [PATCH] arch: cache: cp15: Add mmu_set_region_dcache_behaviour() when SYS_DCACHE_OFF is enable   Patrick DELAUNAY
• [PATCH] arm64: dts: zynqmp: Add psgtr and phy entry for USB and SATA node   Michal Simek
• [PATCH] arm64: dts: zynqmp: Add psgtr and phy entry for USB and SATA node   Michal Simek
• [PATCH] arm64: Fix relocation of env_addr if POSITION_INDEPENDENT=y   Kunihiko Hayashi
• [PATCH] arm64: Fix relocation of env_addr if POSITION_INDEPENDENT=y   Marek Vasut
• [PATCH] arm64: Fix relocation of env_addr if POSITION_INDEPENDENT=y   Tom Rini
• [PATCH] arm64: rk3399: Add support NanoPi R4s 1gb   xiaobo
• [PATCH] arm64: rk3399: Add support NanoPi R4s 1gb   xiaobo
• [PATCH] arm64: rk3399: Add support NanoPi R4s 1gb   Kever Yang
• [PATCH] arm64: rk3399: Add support NanoPi R4s 1gb   alex tian
• [PATCH] arm64: Update memcpy_{from, to}io() helpers   Patrick DELAUNAY
• [PATCH] arm64: zynqmp: Add missing year in Kria dts files   Michal Simek
• [PATCH] arm64: zynqmp: Add missing year in Kria dts files   Michal Simek
• [PATCH] arm64: zynqmp: Add psgtr description to zc1751 dc1 board   Michal Simek
• [PATCH] arm64: zynqmp: Add psgtr description to zc1751 dc1 board   Michal Simek
• [PATCH] arm64: zynqmp: Add support for 64bit addresses in its   Michal Simek
• [PATCH] arm64: zynqmp: Add support for 64bit addresses in its   Michal Simek
• [PATCH] arm64: zynqmp: Disable EFI_CAPSULE_ON_DISK_EARLY   Michal Simek
• [PATCH] arm64: zynqmp: Disable EFI_CAPSULE_ON_DISK_EARLY   Michal Simek
• [PATCH] arm64: zynqmp: Enable WDT command   Michal Simek
• [PATCH] arm64: zynqmp: Handle MMC seq number based on boot device   Michal Simek
• [PATCH] arm64: zynqmp: Remove gpio from aliases list   Michal Simek
• [PATCH] arm64: zynqmp: Remove gpio from aliases list   Michal Simek
• [PATCH] arm: Add (back) VExpress boards support   Andre Przywara
• [PATCH] arm: Add (back) VExpress boards support   Tom Rini
• [PATCH] arm: Add (back) VExpress boards support   Andre Przywara
• [PATCH] arm: Add (back) VExpress boards support   Andre Przywara
• [PATCH] arm: Add (back) VExpress boards support   Tom Rini
• [PATCH] arm: Add (back) VExpress boards support   Andre Przywara
• [PATCH] arm: Add (back) VExpress boards support   Tom Rini
• [PATCH] arm: add initial support for the Phytium Pomelo Board   nicholas_zheng at outlook.com
• [PATCH] arm: add initial support for the Phytium Pomelo Board   Tom Rini
• [PATCH] arm: add initial support for the Phytium Pomelo Board   nicholas_zheng at outlook.com
• [PATCH] arm: add initial support for the Phytium Pomelo Board   Tom Rini
• [PATCH] arm: add initial support for the Phytium Pomelo Board   Peter Robinson
• [PATCH] arm: add initial support for the Phytium Pomelo Board   nicholas_zheng at outlook.com
• [PATCH] arm: add initial support for the Phytium Pomelo Board   nicholas_zheng at outlook.com
• [PATCH] arm: add initial support for the Phytium Pomelo Board   nicholas_zheng at outlook.com
• [PATCH] arm: add initial support for the Phytium Pomelo Board   nicholas_zheng at outlook.com
• [PATCH] arm: add initial support for the Phytium Pomelo Board   nicholas_zheng at outlook.com
• [PATCH] arm: add initial support for the Phytium Pomelo Board   Andre Przywara
• [PATCH] arm: armv8: Fix warning about redeclaring global functions as weak   Tom Rini
• [PATCH] arm: at91: gardena-smart-gateway-at91sam: Adjust to production values   Reto Schneider
• [PATCH] arm: at91: gardena-smart-gateway-at91sam: Adjust to production values   Stefan Roese
• [PATCH] ARM: bcm283x: change the virtual address of the XHCI PCI device base   Marek Szyprowski
• [PATCH] ARM: bcm283x: change the virtual address of the XHCI PCI device base   Jaehoon Chung
• [PATCH] ARM: bcm283x: change the virtual address of the XHCI PCI device base   nicolas saenz julienne
• [PATCH] arm: bootm: wrong lmb region reservation when PRAM is used   Aleksandar Gerasimovski
• [PATCH] arm: bootm: wrong lmb region reservation when PRAM is used   Patrick DELAUNAY
• [PATCH] arm: bootm: wrong lmb region reservation when PRAM is used   Aleksandar Gerasimovski
• [PATCH] arm: dts: db410c: Add missing cd-gpios for SD card detection   Stephan Gerhold
• [PATCH] arm: dts: db410c: Add missing cd-gpios for SD card detection   Ramon Fried
• [PATCH] arm: dts: k3-j7200: ddr: Update to 0.5.0 version of DDR for LPDDR 2666MTs   praneeth at ti.com
• [PATCH] arm: dts: k3-j7200: ddr: Update to 0.5.0 version of DDR for LPDDR 2666MTs   Lokesh Vutla
• [PATCH] arm: dts: ls1043ardb: configure the RGMII ports with rgmii-id   Camelia Groza
• [PATCH] arm: dts: lx2162aqds: support eMMC HS400 mode on esdhc1   Y.b. Lu
• [PATCH] arm: dts: stm32mp15: alignment with v5.13   Patrick Delaunay
• [PATCH] ARM: imx8m: verdin-imx8mm: Increase bootm size to 64 MiB   sbabic at denx.de
• [PATCH] arm: imx: imx8mm: clock: make debug output more descriptive   sbabic at denx.de
• [PATCH] arm: iproc: Add higher speed configurations   Chris Packham
• [PATCH] arm: iproc: Add higher speed configurations   Chris Packham
• [PATCH] arm: iproc: Add higher speed configurations   Tom Rini
• [PATCH] arm: iproc: Add higher speed configurations   Chris Packham
• [PATCH] arm: mach-k3: am642_init: Add missing ddr guard   Gowtham Tammana
• [PATCH] ARM: renesas: Mallocate bootparams on Gen3   Marek Vasut
• [PATCH] ARM: renesas: Turn on PIE for Gen3   Marek Vasut
• [PATCH] ARM: rmobile: beacon-renesom: Enable QSPI NOR Flash   Biju Das
• [PATCH] ARM: rmobile: beacon: Set CONFIG_RZ_G2 on Beacon boards   Adam Ford
• [PATCH] ARM: rmobile: beacon: Set CONFIG_RZ_G2 on Beacon boards   Marek Vasut
• [PATCH] arm: snapdragon: Fix typo in clk_bcr_update()   Sheep Sun
• [PATCH] arm: snapdragon: Fix typo in clk_bcr_update()   Ramon Fried
• [PATCH] arm: snapdragon: Use correct GICC register on APQ8016   Sheep Sun
• [PATCH] arm: snapdragon: Use correct GICC register on APQ8016   Ramon Fried
• [PATCH] armv8: fsl : fix bootcmd and mcinitcmd default value   Wasim Khan
• [PATCH] armv8: fsl : fix bootcmd and mcinitcmd default value   Bedel, Alban
• [PATCH] armv8: fsl : fix bootcmd and mcinitcmd default value   Wasim Khan
• [PATCH] armv8: fsl : fix bootcmd and mcinitcmd default value   Priyanka Jain
• [PATCH] armv8: fsl : fix bootcmd and mcinitcmd default value   Bedel, Alban
• [PATCH] armv8: fsl : fix bootcmd and mcinitcmd default value   Wasim Khan (OSS)
• [PATCH] armv8: fsl : fix bootcmd and mcinitcmd default value   Bedel, Alban
• [PATCH] armv8: layerscape: enable eMMC HS400 workarounds for LX2160A/LX2162A   Y.b. Lu
• [PATCH] armv8: lx2160ardb: Add thermal node fixup for revc board   Priyanka Jain
• [PATCH] autoboot: fix typos of CONFIG_AUTOBOOT_USE_MENUKEY   Da Xue
• [PATCH] autoboot: fix typos of CONFIG_AUTOBOOT_USE_MENUKEY   Tom Rini
• [PATCH] Avoid adding the same dataflash for the second time   Jakub Frackowiak
• [PATCH] azure: Use msys2 20210604 installer for Windows build   Bin Meng
• [PATCH] azure: Use msys2 20210604 installer for Windows build   Tom Rini
• [PATCH] azure: Use msys2 20210604 installer for Windows build   Tom Rini
• [PATCH] board: armltd: Remove bootargs from Total Compute configuration   Anders Dellien
• [PATCH] board: armltd: Remove bootargs from Total Compute configuration   Usama Arif
• [PATCH] board: freescale: common: Refactor I2C mux driver   Stephen Carlson
• [PATCH] board: freescale: common: Refactor I2C mux driver   Priyanka Jain
• [PATCH] board: freescale: t1028xrdb: Add MAINTAINER for revD   Priyanka Jain
• [PATCH] board: sama5d3_xplained: add Falcon boot support   Eugen.Hristev at microchip.com
• [PATCH] board: stm32mp1: correct the property name for eth   Patrick Delaunay
• [PATCH] board: stm32mp1: correct the property name for eth   Patrick Delaunay
• [PATCH] board: stm32mp1: correct the property name for eth   Patrice CHOTARD
• [PATCH] board: stm32mp1: correct the property name for eth   Patrice CHOTARD
• [PATCH] board: ti: j721e: README: Add documentation for eMMC boot   Aswath Govindraju
• [PATCH] clk: clk_versaclock: Add support for versaclock driver   Luca Ceresoli
• [PATCH] clk: clk_versaclock: Add support for versaclock driver   Adam Ford
• [PATCH] clk: clk_versaclock: Add support for versaclock driver   Sean Anderson
• [PATCH] clk: clk_versaclock: Add support for versaclock driver   Adam Ford
• [PATCH] clk: clk_versaclock: Add support for versaclock driver   Luca Ceresoli
• [PATCH] clock_imx8mq: Added 66 MHz support for QSPI   Kwon Tae-young
• [PATCH] clock_imx8mq: Added 66 MHz support for QSPI   Fabio Estevam
• [PATCH] clock_imx8mq: Added 66 MHz support for QSPI   권태영
• [PATCH] clock_imx8mq: Added 66 MHz support for QSPI   Fabio Estevam
• [PATCH] cmd:(cosmetic)Mentioned in 'chpart' command HELP text that it is for MTD devices   Simon Glass
• [PATCH] cmd:Elaborate ‘blkcache’ cmd HELP statement   opensource.kab at gmail.com
• Re: [PATCH] cmd:Elaborate ‘blkcache’ cmd HELP statement   Simon Glass
• [PATCH] cmd: nand biterr - Add support for nand biterr command   Balamanikandan Gunasundar
• [PATCH] cmd: part: Correct error handling   Anders Dellien
• [PATCH] cmd: part: Correct error handling   Sean Anderson
• [PATCH] cmd: pxe_utils: sysboot: fix crash if either board or soc are not set.   Dimitri John Ledkov
• [PATCH] cmd: pxe_utils: sysboot: fix crash if either board or soc are not set.   Ramon Fried
• [PATCH] cmd: setexpr: add dec operation for converting variable to decimal   roland.gaudig-oss at weidmueller.com
• [PATCH] cmd:Update HELP text of ’askenv’   opensource.kab at gmail.com
• Re: [PATCH] cmd:Update HELP text of ’askenv’   Heinrich Schuchardt
• Re: [PATCH] cmd:Update HELP text of ’askenv’   Adarsh Babu Kalepalli
• [PATCH] config_distro_bootcmd: Ability to boot u-boot script from FIT image   Yau Wai Gan
• [PATCH] configs: am3517_evm: Fix boot hang   Adam Ford
• [PATCH] configs: am3517_evm: Fix boot hang   Derald D. Woods
• [PATCH] configs: ls1046ardb: enable PHY_FIXED   Camelia Groza
• [PATCH] configs: omap3x_logic: Enable LTO on more LogicPD OMAP3 boards   Adam Ford
• [PATCH] configs: omap3x_logic: Fix boot hang by reducing SYS_MALLOC_F_LEN   Adam Ford
• [PATCH] configs: OrangePi PC2: Update defaults   Jernej Skrabec
• [PATCH] configs: OrangePi PC2: Update defaults   Jernej Škrabec
• [PATCH] configs: OrangePi PC2: Update defaults   Jernej Škrabec
• [PATCH] configs: OrangePi PC2: Update defaults   Andre Przywara
• [PATCH] configs: sama5d27_wlsom1_ek_mmc: add default bootargs   Eugen.Hristev at microchip.com
• [PATCH] configs: sam boards: add hash command   Eugen.Hristev at microchip.com
• [PATCH] configs: seli8: set envsize to 0x4000   Aleksandar Gerasimovski
• [PATCH] configs: stm32mp1: activate command rng   Patrick Delaunay
• [PATCH] configs: stm32mp1: remove splashimage and add fdtoverlay_addr_r   Patrick Delaunay
• [PATCH] disk/part_dos.c: Fix a variable typo in write_mbr_partitions()   Tom Rini
• [PATCH] disk/part_dos.c: Fix what looks like a variable typo in the write functionality.   Christian Melki
• [PATCH] doc/usage: cmd-usage help file for askenv   opensource.kab at gmail.com
• [PATCH] doc: usage: man-page for pinmux command   Patrick Delaunay
• [PATCH] doc: usage: man-page for pinmux command   Patrice CHOTARD
• [PATCH] doc: usage: man-page for ums command   Patrick Delaunay
• [PATCH] doc: usage: man-page for ums command   Heinrich Schuchardt
• [PATCH] doc: usage: man-page for ums command   Patrick DELAUNAY
• [PATCH] doc: usage: reorder commands in index.rst   Patrick Delaunay
• [PATCH] doc: usage: reorder commands in index.rst   Heinrich Schuchardt
• [PATCH] Docker/CI: Update to "focal" and latest build   Tom Rini
• [PATCH] docs: uefi: Update stale U-Boot on EFI doc   Bin Meng
• [PATCH] docs: uefi: Update stale U-Boot on EFI doc   Bin Meng
• [PATCH] drivers/mmc/rpmb.c: Fix driver routing memory alignment with tmp buffer   Timothée Cercueil
• [PATCH] drivers/mmc/rpmb.c: Fix driver routing memory alignment with tmp buffer   Jaehoon Chung
• [PATCH] drivers: clk: sifive: fu740-prci: replace 'pciaux' with 'pcieaux'   Green Wan
• [PATCH] drivers: clk: sifive: fu740-prci: replace 'pciaux' with 'pcieaux'   Leo Liang
• [PATCH] drivers: watchdog: wdt-uclass: Use IS_ENABLED for WATCHDOG_AUTOSTART   Teresa Remmet
• [PATCH] drivers: watchdog: wdt-uclass: Use IS_ENABLED for WATCHDOG_AUTOSTART   Rasmus Villemoes
• [PATCH] drivers: watchdog: wdt-uclass: Use IS_ENABLED for WATCHDOG_AUTOSTART   Stefan Roese
• [PATCH] drivers: watchdog: wdt-uclass: Use IS_ENABLED for WATCHDOG_AUTOSTART   Stefan Roese
• [PATCH] dtoc: Allow overriding cc with $CC   Simon Glass
• [PATCH] dtoc: Allow overriding cc with $CC   Alper Nebi Yasak
• [PATCH] efi: Restrict the simple file system protocol to support only FAT   Masami Hiramatsu
• [PATCH] efi: Restrict the simple file system protocol to support only FAT   Masami Hiramatsu
• [PATCH] efi: Restrict the simple file system protocol to support only FAT   AKASHI Takahiro
• [PATCH] efi: Restrict the simple file system protocol to support only FAT   Masami Hiramatsu
• [PATCH] efi: Restrict the simple file system protocol to support only FAT   Heinrich Schuchardt
• [PATCH] efi: Restrict the simple file system protocol to support only FAT   Masami Hiramatsu
• [PATCH] efi: Restrict the simple file system protocol to support only FAT   Heinrich Schuchardt
• [PATCH] efi: Restrict the simple file system protocol to support only FAT   Masami Hiramatsu
• [PATCH] efi: Restrict the simple file system protocol to support only FAT   Heinrich Schuchardt
• [PATCH] efi: Restrict the simple file system protocol to support only FAT   Ilias Apalodimas
• [PATCH] efi: Restrict the simple file system protocol to support only FAT   Masami Hiramatsu
• [PATCH] efi: Restrict the simple file system protocol to support only FAT   Ilias Apalodimas
• [PATCH] efi: Restrict the simple file system protocol to support only FAT   Masami Hiramatsu
• [PATCH] efi_loader: Allow capsule update on-disk without checking OsIndications   Ilias Apalodimas
• [PATCH] efi_loader: Allow capsule update on-disk without checking OsIndications   Heinrich Schuchardt
• [PATCH] efi_loader: Allow capsule update on-disk without checking OsIndications   Ilias Apalodimas
• [PATCH] efi_loader: Allow capsule update on-disk without checking OsIndications   AKASHI Takahiro
• [PATCH] efi_loader: Allow capsule update on-disk without checking OsIndications   Ilias Apalodimas
• [PATCH] efi_loader: Allow capsule update on-disk without checking OsIndications   AKASHI Takahiro
• [PATCH] efi_loader: Allow capsule update on-disk without checking OsIndications   Ilias Apalodimas
• [PATCH] efi_loader: allow to disable GOP support   Icenowy Zheng
• [PATCH] efi_loader: allow to disable GOP support   Heinrich Schuchardt
• [PATCH] efi_loader: allow to disable GOP support   Icenowy Zheng
• [PATCH] efi_loader: allow to disable GOP support   Heinrich Schuchardt
• [PATCH] efi_loader: allow to disable GOP support   Peter Robinson
• [PATCH] efi_loader: allow to disable GOP support   Icenowy Zheng
• [PATCH] efi_loader: allow to disable GOP support   Icenowy Zheng
• [PATCH] efi_loader: allow to disable GOP support   Peter Robinson
• [PATCH] efi_loader: allow to disable GOP support   Heinrich Schuchardt
• [PATCH] efi_loader: allow to disable GOP support   Javier Martinez Canillas
• [PATCH] efi_loader: check update capsule parameters   Vincent Stehlé
• [PATCH] efi_loader: check update capsule parameters   Heinrich Schuchardt
• [PATCH] efi_loader: check update capsule parameters   AKASHI Takahiro
• [PATCH] efi_loader: check update capsule parameters   Heinrich Schuchardt
• [PATCH] efi_loader: Do not enable by default on armv7   Tom Rini
• [PATCH] efi_loader: Do not enable by default on armv7   Heinrich Schuchardt
• [PATCH] efi_loader: Do not enable by default on armv7   Mark Kettenis
• [PATCH] efi_loader: Do not enable by default on armv7   Heinrich Schuchardt
• [PATCH] efi_loader: Do not enable by default on armv7   Tom Rini
• [PATCH] efi_loader: Do not enable by default on armv7   Peter Robinson
• [PATCH] efi_loader: Do not enable by default on armv7   Ilias Apalodimas
• [PATCH] efi_loader: FMP cleanups   Ilias Apalodimas
• [PATCH] efi_loader: FMP cleanups   Ilias Apalodimas
• [PATCH] efi_loader: FMP cleanups   Masami Hiramatsu
• [PATCH] efi_loader: FMP cleanups   AKASHI Takahiro
• [PATCH] efi_loader: FMP cleanups   Ilias Apalodimas
• [PATCH] efi_loader: FMP cleanups   Ilias Apalodimas
• [PATCH] efi_loader: FMP cleanups   AKASHI Takahiro
• [PATCH] efi_loader: FMP cleanups   Ilias Apalodimas
• [PATCH] efi_loader: FMP cleanups   AKASHI Takahiro
• [PATCH] efi_loader: FMP cleanups   Ilias Apalodimas
• [PATCH] efi_loader: FMP cleanups   AKASHI Takahiro
• [PATCH] efi_loader: FMP cleanups   Ilias Apalodimas
• [PATCH] efi_loader: FMP cleanups   AKASHI Takahiro
• [PATCH] efi_loader: FMP cleanups   Ilias Apalodimas
• [PATCH] efi_loader: Improve the parameter check for QueryVariableInfo()   Masami Hiramatsu
• [PATCH] efi_loader: Improve the parameter check for QueryVariableInfo()   Heinrich Schuchardt
• [PATCH] efi_loader: Improve the parameter check for QueryVariableInfo()   Masami Hiramatsu
• [PATCH] efi_loader: Improve the parameter check for QueryVariableInfo()   Heinrich Schuchardt
• [PATCH] efi_loader: Improve the parameter check for QueryVariableInfo()   Masami Hiramatsu
• [PATCH] efi_loader: Improve the parameter check for QueryVariableInfo()   Heinrich Schuchardt
• [PATCH] efi_loader: Improve the parameter check for QueryVariableInfo()   Masami Hiramatsu
• [PATCH] env: Leave invalid env for nowhere location   Kunihiko Hayashi
• [PATCH] env: Leave invalid env for nowhere location   Marek Vasut
• [PATCH] env: Leave invalid env for nowhere location   Kunihiko Hayashi
• [PATCH] env: Leave invalid env for nowhere location   Marek Vasut
• [PATCH] env: Leave invalid env for nowhere location   Kunihiko Hayashi
• [PATCH] env: Leave invalid env for nowhere location   Marek Vasut
• [PATCH] env: Leave invalid env for nowhere location   Kunihiko Hayashi
• [PATCH] env: Leave invalid env for nowhere location   Marek Vasut
• [PATCH] evb_rk3399: add usb ohci definations   Kever Yang
• [PATCH] evb_rk3399: add usb ohci definations   Art Nikpal
• [PATCH] evb_rk3399: add usb ohci definations   Art Nikpal
• [PATCH] evb_rk3399: add usb ohci definations   Peter Robinson
• [PATCH] fdtdec: fdtdec_get_aliases_highest_id: skip aliases to disabled nodes   Tim Harvey
• [PATCH] fdtdec: fdtdec_get_aliases_highest_id: skip aliases to disabled nodes   Sean Anderson
• [PATCH] fdtdec: fdtdec_get_aliases_highest_id: skip aliases to disabled nodes   Tim Harvey
• [PATCH] fdtdec: fdtdec_get_aliases_highest_id: skip aliases to disabled nodes   Sean Anderson
• [PATCH] fdtdec: fdtdec_get_aliases_highest_id: skip aliases to disabled nodes   Tim Harvey
• [PATCH] fit: Allow external data for FDTs   John Keeping
• [PATCH] fit: Allow external data for FDTs   Simon Glass
• [PATCH] fit: Load DTO into temporary buffer and ignore load address   Marek Vasut
• [PATCH] fit: Load DTO into temporary buffer and ignore load address   Simon Glass
• [PATCH] fit: Load DTO into temporary buffer and ignore load address   Marek Vasut
• [PATCH] fs/squashfs: fix reading of fragmented files   João Marcos Costa
• [PATCH] fs/squashfs: fix reading of fragmented files   Tom Rini
• [PATCH] fs/squashfs: fix reading of fragmented files   João Marcos Costa
• [PATCH] fs/squashfs: fix reading of fragmented files   João Marcos Costa
• [PATCH] fs/squashfs: fix reading of fragmented files   Tom Rini
• [PATCH] fs/squashfs: fix reading of fragmented files   Tom Rini
• [PATCH] get_maintainer.pl: update from Linux kernel v5.13-rc6   Trevor Woerner
• [PATCH] gpio: pca953x: Add missing i2c dependency   Michal Simek
• [PATCH] gpio: pca953x: Add missing i2c dependency   Michal Simek
• [PATCH] gpio: pca953x: Add missing i2c dependency   Heiko Schocher
• [PATCH] imx: bootaux: respect ELF support configuration   Cody Gray
• [PATCH] imx: bootaux: respect ELF support configuration   Max Krummenacher
• [PATCH] imx: ventana: enable dm support for PCI and FEC ethernet   sbabic at denx.de
• [PATCH] include: configs: soc64: Use CONFIG_SPL_ATF to differentiate bootfile   Ley Foon Tan
• [PATCH] kconfig / kbuild: Re-sync with Linux 4.20   Tom Rini
• [PATCH] keymile: common: fix hexadecimal env variable format   Aleksandar Gerasimovski
• [PATCH] lib: remove superfluous #ifdefs from date.c   Heinrich Schuchardt
• [PATCH] MAINTAINER, git-mailrc: Update the mmc maintainer   Jaehoon Chung
• [PATCH] MAINTAINER, git-mailrc: Update the mmc maintainer   Bin Meng
• [PATCH] MAINTAINER, git-mailrc: Update the mmc maintainer   Jaehoon Chung
• [PATCH] MAINTAINER, git-mailrc: Update the mmc maintainer   Bin Meng
• [PATCH] MAINTAINER, git-mailrc: Update the mmc maintainer   Jaehoon Chung
• [PATCH] Makefile: Adjust indention of GENENV quiet output   Jan Kiszka
• [PATCH] Makefile: Adjust indention of GENENV quiet output   Tom Rini
• [PATCH] Makefile: Conditionally add defaultenv_h to envtools target   Joel Stanley
• [PATCH] mips: mt7688: gardena-smart-gateway: Adjust to production values   Reto Schneider
• [PATCH] mips: mt7688: gardena-smart-gateway: Adjust to production values   Stefan Roese
• [PATCH] mmc: rpmb: Fix driver routing memory alignment with tmp buffer   Timothée Cercueil
• [PATCH] mmc: rpmb: Fix driver routing memory alignment with tmp buffer   litchi.pi
• [PATCH] mmc: rpmb: Fix driver routing memory alignment with tmp buffer   Jaehoon Chung
• [PATCH] mmc: sdhci: Write to HOST_CONTROL2 register for HS400 speed mode   Aswath Govindraju
• [PATCH] mtd: nand: NFC drivers for RK3308, RK2928 and others   Yifeng Zhao
• [PATCH] mtd: nand: NFC drivers for RK3308, RK2928 and others   Kever Yang
• [PATCH] mtd: spinand: macronix: Add support for serial NAND flash   Miquel Raynal
• [PATCH] mx6sabresd: Make checkboard respect CONFIG_NXP_BOARD_REVISION   Cody Gray
• [PATCH] mx6sabresd: Make checkboard respect CONFIG_NXP_BOARD_REVISION   Fabio Estevam
• [PATCH] mx7d: Add Storopack's SMEGW01 board   sbabic at denx.de
• [PATCH] net: dwc_eth_qos: Fix needless phy auto-negotiation restarts   Patrick DELAUNAY
• [PATCH] net: dwc_eth_qos: Fix needless phy auto-negotiation restarts   Ramon Fried
• [PATCH] net: dwc_eth_qos: Revert some changes of commit 3a97da12ee7b   Ramon Fried
• [PATCH] net: dwc_eth_qos: Revert some changes of commit 3a97da12ee7b   Ramon Fried
• [PATCH] net: e1000: do not attempt to set hwaddr for i210 without FLASH   Tim Harvey
• [PATCH] net: e1000: do not attempt to set hwaddr for i210 without FLASH   Ramon Fried
• [PATCH] net: e1000: Fix Unchecked return value coverity   Ramon Fried
• [PATCH] net: e1000: Fix Unchecked return value coverity   Z.Q. Hou
• [PATCH] net: e1000: Fix Unchecked return value coverity   Ramon Fried
• [PATCH] net: e1000: Fix Unchecked return value coverity   Z.Q. Hou
• [PATCH] net: fm: Fix a memory leak issue   Zhiqiang Hou
• [PATCH] net: fm: Fix a memory leak issue   Ramon Fried
• [PATCH] net: tsec: add option to set device max-speed via dts   Aleksandar Gerasimovski
• [PATCH] net: tsec: add option to set device max-speed via dts   Vladimir Oltean
• [PATCH] net: use a more deterministic approach to get the active ethernet device   Ramon Fried
• [PATCH] net: use the same alias stem for ethernet as linux   Ramon Fried
• [PATCH] Nokia RX-51: Add check for /lib/ld-linux.so.2 in test script   Pali Rohár
• [PATCH] Nokia RX-51: Update documentation about ext2/3/4   Pali Rohár
• [PATCH] Nokia RX-51: Update documentation about ext2/3/4   Tom Rini
• [PATCH] Nokia RX-51: Update documentation about flashing   Pali Rohár
• [PATCH] nvme: Correct the prps per page calculation method   Wesley Sheng
• [PATCH] nvme: Correct the prps per page calculation method   Bin Meng
• [PATCH] nvme: Correct the prps per page calculation method   Wesley Sheng
• [PATCH] nvme: Correct the prps per page calculation method   Bin Meng
• [PATCH] nvme: Correct the prps per page calculation method   Bin Meng
• [PATCH] nvme: don't create block device for inactive namespace   Simon Glass
• [PATCH] nvme: don't create block device for inactive namespace   Bin Meng
• [PATCH] nvme: don't create block device for inactive namespace   Heinrich Schuchardt
• [PATCH] nvme: don't create block device for inactive namespace   Bin Meng
• [PATCH] nvme: fix for big endian systems   David Lamparter
• [PATCH] nvme: fix for big endian systems   Bin Meng
• [PATCH] nvme: fix for big endian systems   Bin Meng
• [PATCH] nvme: fix for big endian systems   Bin Meng
• [PATCH] nvme: Remove the redundant aqa value setting   Wesley Sheng
• [PATCH] nvme: Remove the redundant aqa value setting   Bin Meng
• [PATCH] nvme: Remove the redundant aqa value setting   Wesley Sheng
• [PATCH] nvme: Remove the redundant aqa value setting   Bin Meng
• [PATCH] nvme: Remove the redundant aqa value setting   Bin Meng
• [PATCH] o4-imx-nano: Fix dtc warnings   Fabio Estevam
• [PATCH] o4-imx-nano: Fix dtc warnings   Oleh Kravchenko
• [PATCH] o4-imx-nano: Fix dtc warnings   Stefano Babic
• [PATCH] octeontx: do not require cavium BDK node to be present   Tim Harvey
• [PATCH] octeontx: do not require cavium BDK node to be present   Stefan Roese
• [PATCH] optee/rpmb.c: Fix driver routing memory alignment using a temporary buffer   Timothée Cercueil
• [PATCH] optee/rpmb.c: Fix driver routing memory alignment using a temporary buffer   Heinrich Schuchardt
• [PATCH] optee/rpmb.c: Fix driver routing memory alignment using a temporary buffer   litchi.pi
• [PATCH] patman: Handle PAGER containing arguments   Paul Barker
• [PATCH] patman: Handle PAGER containing arguments   Simon Glass
• [PATCH] patman: Handle PAGER containing arguments   Paul Barker
• [PATCH] phy: add nxp tja1103 phy driver   Radu Pirea (NXP OSS)
• [PATCH] phy: add nxp tja1103 phy driver   Ramon Fried
• [PATCH] phy: add nxp tja1103 phy driver   Ramon Fried
• [PATCH] pico-imx6: README: Fix the boot mode settings URL   sbabic at denx.de
• [PATCH] Prepare v2021.07-rc4   xiaobo
• [PATCH] Prepare v2021.07-rc4   Bin Meng
• [PATCH] Prepare v2021.07-rc4   alex tian
• [PATCH] Prepare v2021.07-rc4   alex tian
• [PATCH] Prepare v2021.07-rc4   alex tian
• [PATCH] pwm: cros_ec: Rename "priv_auto_alloc_size" to "priv_auto"   Simon Glass
• [PATCH] Revert "mmc: fsl_esdhc_imx: use VENDORSPEC_FRC_SDCLK_ON to control card clock output"   Fabio Estevam
• [PATCH] riscv: ae350: doc: Remove CONFIG_SKIP_LOWLEVEL_INIT   Bin Meng
• [PATCH] riscv: ae350: doc: Remove CONFIG_SKIP_LOWLEVEL_INIT   Rick Chen
• [PATCH] riscv: sifive: Set default fdtfile names.   Dimitri John Ledkov
• [PATCH] riscv: sifive: Set default fdtfile names.   Leo Liang
• [PATCH] riscv: sifive: Set default fdtfile names.   Bin Meng
• [PATCH] rk3399: Add basic support for helios64   Florian Klink
• [PATCH] rk3399: boot_devices fix spinor node name   Kever Yang
• [PATCH] rk3399: boot_devices fix spinor node name   Art Nikpal
• [PATCH] rk3399_common: setup fdtoverlay_addr_r value   Kever Yang
• [PATCH] rockchip: Fix MMC boot order   Alex Bee
• [PATCH] rockchip: Fix MMC boot order   Kever Yang
• [PATCH] rpi: always set fdt_addr with firmware-provided FDT address   Mauro Salvini
• [PATCH] sandbox: Support signal handling only when requested   Simon Glass
• [PATCH] sandbox: Support signal handling only when requested   Heinrich Schuchardt
• [PATCH] sandbox: Support signal handling only when requested   Simon Glass
• [PATCH] sandbox: Support signal handling only when requested   Heinrich Schuchardt
• [PATCH] sandbox: Support signal handling only when requested   Sean Anderson
• [PATCH] sandbox: Support signal handling only when requested   Heinrich Schuchardt
• [PATCH] sandbox: Support signal handling only when requested   Sean Anderson
• [PATCH] sandbox: Support signal handling only when requested   Heinrich Schuchardt
• [PATCH] scripts/get_default_envs.sh: Update for thin archive support   Tom Rini
• [PATCH] scripts/get_maintainer.pl: obey ignore list   Trevor Woerner
• [PATCH] scripts/get_maintainer.pl: obey ignore list   Tom Rini
• [PATCH] scripts/get_maintainer.pl: obey ignore list   Trevor Woerner
• [PATCH] scripts/get_maintainer.pl: obey ignore list   Tom Rini
• [PATCH] serial: Add additional depencies for PL010 and PL011 drivers   Michal Simek
• [PATCH] serial: Add additional depencies for PL010 and PL011 drivers   Simon Glass
• [PATCH] serial: serial_msm: Ensure BAM/single character mode are disabled   Stephan Gerhold
• [PATCH] serial: serial_msm: Ensure BAM/single character mode are disabled   Ramon Fried
• [PATCH] serial: serial_msm: Ensure BAM/single character mode are disabled   Stephan Gerhold
• [PATCH] serial: serial_msm: Ensure BAM/single character mode are disabled   Ramon Fried
• [PATCH] serial: serial_msm: Ensure BAM/single character mode are disabled   Stephan Gerhold
• [PATCH] serial: serial_msm: Ensure BAM/single character mode are disabled   Ramon Fried
• [PATCH] serial: serial_msm: Ensure BAM/single character mode are disabled   Stephan Gerhold
• [PATCH] serial: serial_msm: Ensure BAM/single character mode are disabled   Ramon Fried
• [PATCH] serial: serial_msm: Ensure BAM/single character mode are disabled   Ramon Fried
• [PATCH] serial: zynq: Add support for serial parameters   Kunihiko Hayashi
• [PATCH] serial: zynq: Add support for serial parameters   Michal Simek
• [PATCH] serial: zynq: Add support for serial parameters   Kunihiko Hayashi
• [PATCH] serial: zynq: Add support for serial parameters   Michal Simek
• [PATCH] serial: zynq: Add support for serial parameters   Kunihiko Hayashi
• [PATCH] sf: Querying write-protect status before operating the flash   chao zeng
• [PATCH] sf: Querying write-protect status before operating the flash   Jagan Teki
• [PATCH] smbios: Fix BIOS Characteristics Extension Byte 2   Ilias Apalodimas
• [PATCH] smbios: Fix BIOS Characteristics Extension Byte 2   Heinrich Schuchardt
• [PATCH] smbios: Fix BIOS Characteristics Extension Byte 2   Ilias Apalodimas
• [PATCH] smbios: Fix BIOS Characteristics Extension Byte 2   Simon Glass
• [PATCH] smbios: Fix BIOS Characteristics Extension Byte 2   Ilias Apalodimas
• [PATCH] smbios: Fix calculating BIOS Release Date   Pali Rohár
• [PATCH] smbios: Fix SMBIOS tables   Ilias Apalodimas
• [PATCH] smbios: Fix SMBIOS tables   Heinrich Schuchardt
• [PATCH] smbios: Fix SMBIOS tables   Simon Glass
• [PATCH] smbios: Fix SMBIOS tables   Ilias Apalodimas
• [PATCH] smbios: Fix SMBIOS tables   Simon Glass
• [PATCH] socfpga_de0_nano_soc: enable CONFIG_NET_RANDOM_ETHADDR   Srinuvasan A
• [PATCH] socfpga_de0_nano_soc: enable CONFIG_NET_RANDOM_ETHADDR   Srinuvasan A
• [PATCH] spi: Add MXIC controller driver   Zhengxun
• [PATCH] spi: Add MXIC controller driver   Jagan Teki
• [PATCH] spi: Add MXIC controller driver   Jagan Teki
• [PATCH] spi: stm32_qspi: Fix short data write operation   Patrick DELAUNAY
• [PATCH] spi: stm32_qspi: Fix short data write operation   Patrice CHOTARD
• [PATCH] spl: fit: Also record architecture in /fit-images   Simon Glass
• [PATCH] stm32mp: stm32prog: fix the content of short help message   Patrick Delaunay
• [PATCH] sunxi-common: support loading compressed kernel images on ARMv8   Arnaud Ferraris
• [PATCH] sunxi: h3: add console support for uart1-3   Manuel Dipolt
• [PATCH] sunxi: h3: Add initial ZeroPi support   Yu-Tung Chang
• [PATCH] test/py: tpm2: Skip tpm pytest based on env variable   T Karthik Reddy
• [PATCH] ti: am335x_evm: Switch to DISTRO_BOOT only   Tom Rini
• [PATCH] tools: Fix default target compile tools in Python tools   Alper Nebi Yasak
• [PATCH] tools: Use a single target-independent config to enable OpenSSL   AKASHI Takahiro
• [PATCH] tools: Use a single target-independent config to enable OpenSSL   Alex G.
• [PATCH] tools: Use a single target-independent config to enable OpenSSL   Tom Rini
• [PATCH] tools: Use a single target-independent config to enable OpenSSL   AKASHI Takahiro
• [PATCH] tools: Use a single target-independent config to enable OpenSSL   Simon Glass
• [PATCH] tools: Use a single target-independent config to enable OpenSSL   Alex G.
• [PATCH] tools: Use a single target-independent config to enable OpenSSL   Simon Glass
• [PATCH] usb: cdns3: cdns3-ti: Fix clk_get_by_name() to get the correct name   Aswath Govindraju
• [PATCH] usb: cdns3: cdns3-ti: Fix clk_get_by_name() to get the correct name   Marek Vasut
• [PATCH] watchdog: cadence: Add expire_now method   Michal Simek
• [PATCH] x86: Discard .note.gnu.property sections   Bin Meng
• [PATCH] x86: Discard .note.gnu.property sections   Tom Rini
• [PATCH] xilinx: Sync CONFIG_DEFAULT_DEVICE_TREE position   Michal Simek
• [PATCH] xilinx: Sync CONFIG_DEFAULT_DEVICE_TREE position   Tom Rini
• [PATCH] xilinx: Sync CONFIG_DEFAULT_DEVICE_TREE position   Michal Simek
• [PATCH] xilinx: zynqmp: Add support for 67dr silicon   Michal Simek
• [PATCH] zynqmp: Enable regulators   Michal Simek
• [PATCH] zynqmp: Remove u-boot,dm-pre-reloc for uart instances   Michal Simek
• [PATCH] zynqmp: spl: support DRAM ECC initialization   Jorge Ramirez-Ortiz
• [PATCH] zynqmp: spl: support DRAM ECC initialization   Michal Simek
• [PATCH] zynqmp: spl: support DRAM ECC initialization   Jorge Ramirez-Ortiz, Foundries
• [PATCH u-boot-dm + u-boot-spi v4 00/10] Support SPI NORs and OF partitions in `mtd list`   Marek Behún
• [PATCH u-boot-dm + u-boot-spi v4 00/10] Support SPI NORs and OF partitions in `mtd list`   Jagan Teki
• [PATCH u-boot-marvell 0/7] Changes for Turris MOX   Marek Behún
• [PATCH u-boot-marvell 1/2] arm: mvebu: turris_omnia: update rescue mode boot command   Pali Rohár
• [PATCH u-boot-marvell 1/2] arm: mvebu: turris_omnia: update rescue mode boot command   Stefan Roese
• [PATCH u-boot-marvell 1/2] arm: mvebu: turris_omnia: update rescue mode boot command   Stefan Roese
• [PATCH u-boot-marvell 1/7] arm: mvebu: dts: turris_mox: add button and LED nodes   Marek Behún
• [PATCH u-boot-marvell 2/2] arm: mvebu: turris_omnia: support invoking rescue boot from console   Pali Rohár
• [PATCH u-boot-marvell 2/2] arm: mvebu: turris_omnia: support invoking rescue boot from console   Stefan Roese
• [PATCH u-boot-marvell 2/2] arm: mvebu: turris_omnia: support invoking rescue boot from console   Stefan Roese
• [PATCH u-boot-marvell 2/7] arm: mvebu: turris_mox: add support for board rescue mode   Marek Behún
• [PATCH u-boot-marvell 2/7] arm: mvebu: turris_mox: add support for board rescue mode   Marek Behún
• [PATCH u-boot-marvell 3/7] arm: mvebu: turris_mox: start blinking PHY LEDs when entering rescue   Marek Behún
• [PATCH u-boot-marvell 4/5] serial: a37xx: Switch to XTAL clock when booting Linux kernel   Pali Rohár
• [PATCH u-boot-marvell 4/7] arm: mvebu: configs: turris_mox: add fdtfile default env variable   Marek Behún
• [PATCH u-boot-marvell 5/7] arm: mvebu: dts: turris_mox: add nodes for SPI NOR partitions   Marek Behún
• [PATCH u-boot-marvell 6/7] arm: mvebu: turris_mox: enable options for Turris network boot   Marek Behún
• [PATCH u-boot-marvell 7/7] arm64: a37xx: dts: rename internal-regs node   Marek Behún
• [PATCH u-boot-marvell 7/7] arm64: a37xx: dts: rename internal-regs node   Marek Behún
• [PATCH u-boot-marvell] arm: mvebu: turris_{omnia, mox}: ensure running bootcmd_rescue always works   Marek Behún
• [PATCH u-boot-marvell] arm: mvebu: turris_{omnia,mox}: ensure running bootcmd_rescue always works   Marek Behun
• [PATCH u-boot-marvell] arm: mvebu: turris_{omnia,mox}: ensure running bootcmd_rescue always works   Stefan Roese
• [PATCH u-boot-marvell] arm: mvebu: turris_{omnia,mox}: ensure running bootcmd_rescue always works   Stefan Roese
• [PATCH u-boot-marvell] arm: mvebu: turris_{omnia,mox}: ensure running bootcmd_rescue always works   Stefan Roese
• [PATCH u-boot-marvell] PLEASE TEST ddr: marvell: a38x: fix SPLIT_OUT_MIX state decision   Pali Rohár
• [PATCH u-boot-marvell] PLEASE TEST ddr: marvell: a38x: fix SPLIT_OUT_MIX state decision   Chris Packham
• [PATCH u-boot-marvell] PLEASE TEST ddr: marvell: a38x: fix SPLIT_OUT_MIX state decision   Chris Packham
• [PATCH u-boot-marvell v2 0/6] Changes for Turris MOX   Marek Behún
• [PATCH u-boot-marvell v2 0/6] Changes for Turris MOX   Stefan Roese
• [PATCH u-boot-marvell v2 1/6] arm: mvebu: dts: turris_mox: add button and LED nodes   Marek Behún
• [PATCH u-boot-marvell v2 1/6] arm: mvebu: dts: turris_mox: add button and LED nodes   Pali Rohár
• [PATCH u-boot-marvell v2 1/6] arm: mvebu: dts: turris_mox: add button and LED nodes   Stefan Roese
• [PATCH u-boot-marvell v2 2/6] arm: mvebu: turris_mox: add support for board rescue mode   Marek Behún
• [PATCH u-boot-marvell v2 2/6] arm: mvebu: turris_mox: add support for board rescue mode   Pali Rohár
• [PATCH u-boot-marvell v2 2/6] arm: mvebu: turris_mox: add support for board rescue mode   Stefan Roese
• [PATCH u-boot-marvell v2 3/6] arm: mvebu: turris_mox: start blinking PHY LEDs when entering rescue   Marek Behún
• [PATCH u-boot-marvell v2 3/6] arm: mvebu: turris_mox: start blinking PHY LEDs when entering rescue   Pali Rohár
• [PATCH u-boot-marvell v2 3/6] arm: mvebu: turris_mox: start blinking PHY LEDs when entering rescue   Stefan Roese
• [PATCH u-boot-marvell v2 4/6] arm: mvebu: configs: turris_mox: add fdtfile default env variable   Marek Behún
• [PATCH u-boot-marvell v2 4/6] arm: mvebu: configs: turris_mox: add fdtfile default env variable   Pali Rohár
• [PATCH u-boot-marvell v2 4/6] arm: mvebu: configs: turris_mox: add fdtfile default env variable   Stefan Roese
• [PATCH u-boot-marvell v2 5/6] arm: mvebu: dts: turris_mox: add nodes for SPI NOR partitions   Marek Behún
• [PATCH u-boot-marvell v2 5/6] arm: mvebu: dts: turris_mox: add nodes for SPI NOR partitions   Pali Rohár
• [PATCH u-boot-marvell v2 5/6] arm: mvebu: dts: turris_mox: add nodes for SPI NOR partitions   Stefan Roese
• [PATCH u-boot-marvell v2 5/6] arm: mvebu: dts: turris_mox: add nodes for SPI NOR partitions   Stefan Roese
• [PATCH u-boot-marvell v2 5/6] arm: mvebu: dts: turris_mox: add nodes for SPI NOR partitions   Pali Rohár
• [PATCH u-boot-marvell v2 5/6] arm: mvebu: dts: turris_mox: add nodes for SPI NOR partitions   Marek Behun
• [PATCH u-boot-marvell v2 5/6] arm: mvebu: dts: turris_mox: add nodes for SPI NOR partitions   Stefan Roese
• [PATCH u-boot-marvell v2 6/6] arm: mvebu: turris_mox: enable options for Turris network boot   Marek Behún
• [PATCH u-boot-marvell v2 6/6] arm: mvebu: turris_mox: enable options for Turris network boot   Pali Rohár
• [PATCH u-boot-marvell v2 6/6] arm: mvebu: turris_mox: enable options for Turris network boot   Stefan Roese
• [PATCH u-boot v4 00/36] U-Boot LTO (Sandbox + Some ARM boards)   Patrick DELAUNAY
• [PATCH u-boot v4 00/36] U-Boot LTO (Sandbox + Some ARM boards)   Tom Rini
• [PATCH u-boot v4 00/36] U-Boot LTO (Sandbox + Some ARM boards)   Marek Behún
• [PATCH u-boot v4 00/36] U-Boot LTO (Sandbox + Some ARM boards)   Heinrich Schuchardt
• [PATCH u-boot v4 00/36] U-Boot LTO (Sandbox + Some ARM boards)   Tom Rini
• [PATCH v1 0/1] cmd: setexpr: add dec operation for converting variable to decimal   roland.gaudig-oss at weidmueller.com
• [PATCH v1 0/1] sunxi: h3: Add initial ZeroPi support   Yu-Tung Chang
• [PATCH v1 0/1] sunxi: h3: Add initial ZeroPi support   Yu-Tung Chang
• [PATCH v1 0/2]   Yifeng Zhao
• [PATCH v1 0/3] lpc32xx updates   Trevor Woerner
• [PATCH v1 0/5] Add RK3568 SoC support   Joseph Chen
• [PATCH v10 0/2] Add OpenPiton-riscv64 Board Support   Tianrui Wei
• [PATCH v10 00/27] mtd: spi-nor-core: add xSPI Octal DTR support   Pratyush Yadav
• [PATCH v10 00/27] mtd: spi-nor-core: add xSPI Octal DTR support   Jagan Teki
• [PATCH v10 01/27] spi: spi-mem: allow specifying whether an op is DTR or not   Pratyush Yadav
• [PATCH v10 02/27] spi: spi-mem: allow specifying a command's extension   Pratyush Yadav
• [PATCH v10 03/27] spi: spi-mem: export spi_mem_default_supports_op()   Pratyush Yadav
• [PATCH v10 04/27] spi: spi-mem: add spi_mem_dtr_supports_op()   Pratyush Yadav
• [PATCH v10 04/27] spi: spi-mem: add spi_mem_dtr_supports_op()   Jagan Teki
• [PATCH v10 04/27] spi: spi-mem: add spi_mem_dtr_supports_op()   Pratyush Yadav
• [PATCH v10 04/27] spi: spi-mem: add spi_mem_dtr_supports_op()   Jagan Teki
• [PATCH v10 04/27] spi: spi-mem: add spi_mem_dtr_supports_op()   Pratyush Yadav
• [PATCH v10 04/27] spi: spi-mem: add spi_mem_dtr_supports_op()   Jagan Teki
• [PATCH v10 05/27] spi: cadence-qspi: Do not calibrate when device tree sets read delay   Pratyush Yadav
• [PATCH v10 06/27] spi: cadence-qspi: Add a small delay before indirect writes   Pratyush Yadav
• [PATCH v10 07/27] spi: cadence-qspi: Add support for octal DTR flashes   Pratyush Yadav
• [PATCH v10 08/27] mtd: spi-nor-core: Fix address width on flash chips > 16MB   Pratyush Yadav
• [PATCH v10 09/27] mtd: spi-nor-core: Add a ->setup() hook   Pratyush Yadav
• [PATCH v10 1/2] board: riscv: add openpiton-riscv64 SoC support   Tianrui Wei
• [PATCH v10 10/27] mtd: spi-nor-core: Move SFDP related declarations to top   Pratyush Yadav
• [PATCH v10 11/27] mtd: spi-nor-core: Introduce flash-specific fixup hooks   Pratyush Yadav
• [PATCH v10 12/27] mtd: spi-nor-core: Rework hwcaps selection   Pratyush Yadav
• [PATCH v10 13/27] mtd: spi-nor-core: Do not set data direction when there is no data   Pratyush Yadav
• [PATCH v10 14/27] mtd: spi-nor-core: Add support for DTR protocol   Pratyush Yadav
• [PATCH v10 15/27] mtd: spi-nor-core: prepare BFPT parsing for JESD216 rev D   Pratyush Yadav
• [PATCH v10 16/27] mtd: spi-nor-core: Get command opcode extension type from BFPT   Pratyush Yadav
• [PATCH v10 17/27] mtd: spi-nor-core: Parse xSPI Profile 1.0 table   Pratyush Yadav
• [PATCH v10 18/27] mtd: spi-nor-core: Prepare Read SR and FSR for Octal DTR mode   Pratyush Yadav
• [PATCH v10 19/27] mtd: spi-nor-core: Enable octal DTR mode when possible   Pratyush Yadav
• [PATCH v10 2/2] mmc: openpiton: add piton_mmc driver   Tianrui Wei
• [PATCH v10 20/27] mtd: spi-nor-core: Do not make invalid quad enable fatal   Pratyush Yadav
• [PATCH v10 21/27] mtd: spi-nor-core: Detect Soft Reset sequence support from BFPT   Pratyush Yadav
• [PATCH v10 22/27] mtd: spi-nor-core: Perform a Soft Reset on shutdown   Pratyush Yadav
• [PATCH v10 23/27] mtd: spi-nor-core: Perform a Soft Reset on boot   Pratyush Yadav
• [PATCH v10 24/27] mtd: spi-nor-core: allow truncated erases   Pratyush Yadav
• [PATCH v10 25/27] mtd: spi-nor-core: Add non-uniform erase for Spansion/Cypress   Pratyush Yadav
• [PATCH v10 26/27] mtd: spi-nor-core: Add support for Cypress Semper flash   Pratyush Yadav
• [PATCH v10 27/27] mtd: spi-nor-core: Allow using Micron mt35xu512aba in Octal DTR mode   Pratyush Yadav
• [PATCH v1 1/1] cmd: setexpr: add dec operation for converting variable to decimal   roland.gaudig-oss at weidmueller.com
• [PATCH v1 1/1] cmd: setexpr: add dec operation for converting variable to decimal   Simon Glass
• [PATCH v1 1/1] cmd: setexpr: add dec operation for converting variable to decimal   Sean Anderson
• [PATCH v1 1/1] cmd: setexpr: add dec operation for converting variable to decimal   Simon Glass
• [PATCH v1 1/1] cmd: setexpr: add dec operation for converting variable to decimal   Wolfgang Denk
• [PATCH v1 1/1] cmd: setexpr: add dec operation for converting variable to decimal   Wolfgang Denk
• [PATCH v1 1/1] cmd: setexpr: add dec operation for converting variable to decimal   Roland Gaudig (OSS)
• [PATCH v1 1/1] cmd: setexpr: add dec operation for converting variable to decimal   Roland Gaudig (OSS)
• [PATCH v1 1/1] cmd: setexpr: add dec operation for converting variable to decimal   Wolfgang Denk
• [PATCH v1 1/1] cmd: setexpr: add dec operation for converting variable to decimal   Tom Rini
• [PATCH v1 1/1] sunxi: h3: Add initial ZeroPi support   Yu-Tung Chang
• [PATCH v1 1/1] sunxi: h3: Add initial ZeroPi support   Yu-Tung Chang
• [PATCH v1 1/1] sunxi: h3: Add initial ZeroPi support   Andre Przywara
• [PATCH v1 1/1] test: Include /sbin to the PATH when creating file system   Andy Shevchenko
• [PATCH v1 1/1] test: Include /sbin to the PATH when creating file system   Tom Rini
• [PATCH v1 1/2] mmc: rockchip_sdhci: add phy and clock config for rk3399   Yifeng Zhao
• [PATCH v1 1/2] mmc: rockchip_sdhci: add phy and clock config for rk3399   Jaehoon Chung
• [PATCH v1 1/2] mmc: rockchip_sdhci: add phy and clock config for rk3399   赵仪峰
• [PATCH v1 1/3] lpc32xx: Kconfig: switch to CONFIG_CONS_INDEX   Trevor Woerner
• [PATCH v1 1/5] arm: dts: Sync rockchip-pinconf.dtsi from kernel   Joseph Chen
• [PATCH v1 1/5] arm: dts: Sync rockchip-pinconf.dtsi from kernel   Kever Yang
• [PATCH v1 2/2] mmc: rockchip_sdhci: Add support for RK3568   Yifeng Zhao
• [PATCH v1 2/2] mmc: rockchip_sdhci: Add support for RK3568   Jaehoon Chung
• [PATCH v1 2/3] lpc32xx: import device tree from Linux   Trevor Woerner
• [PATCH v1 2/5] arm: dts: rockchip: Add dts for rk3568 evb   Joseph Chen
• [PATCH v1 2/5] arm: dts: rockchip: Add dts for rk3568 evb   Kever Yang
• [PATCH v12 2/8] drivers: clk: add fu740 support   Andreas Schwab
• [PATCH v12 2/8] drivers: clk: add fu740 support   Green Wan
• [PATCH v1 3/3] arm: lpc32xx: add EA LPC3250 DevKitv2 board support   Trevor Woerner
• [PATCH v1 3/5] rockchip: rk3568: Add sdram driver   Joseph Chen
• [PATCH v1 3/5] rockchip: rk3568: Add sdram driver   Kever Yang
• [PATCH v1 4/5] rockchip: Add rk3568 architecture core   Joseph Chen
• [PATCH v1 4/5] rockchip: Add rk3568 architecture core   Peter Robinson
• [PATCH v1 4/5] rockchip: Add rk3568 architecture core   陈健洪
• [PATCH v1 4/5] rockchip: Add rk3568 architecture core   Peter Robinson
• [PATCH v1 4/5] rockchip: Add rk3568 architecture core   Kever Yang
• [PATCH v1 4/5] rockchip: Add rk3568 architecture core   Kever Yang
• [PATCH v1 5/5] board: rockchip: Add rk3568 evb support   Joseph Chen
• [PATCH v1 5/5] board: rockchip: Add rk3568 evb support   Kever Yang
• [PATCH v1] [ZynqMP] Writing correct value to ANALOG_BUS.   Adrian Fiergolski
• [PATCH v1] [ZynqMP] Writing correct value to ANALOG_BUS.   Michal Simek
• [PATCH V1] arm: add initial support for the Phytium Pomelo Board   nicholas_zheng at outlook.com
• [PATCH v1] arm: dts: ls1021a.dtsi: Fix invalid reg on gpio nodes   Lasse Klok Mikkelsen
• [PATCH v1] arm: dts: ls1021a.dtsi: Fix invalid reg on gpio nodes   Rasmus Villemoes
• [PATCH v1] ARM: dts: rockchip: update rk3xxx.dtsi   Johan Jonker
• [PATCH v1] mtd: spi-nor-ids: Add support for XMC XM25QH64C   Reto Schneider
• [PATCH v1] mtd: spi-nor-ids: Add support for XMC XM25QH64C   Stefan Roese
• [PATCH v1] rockchip: rk3188-cru-common: sync clock dt-binding header from Linux   Johan Jonker
• [PATCH v1] rockchip: rk3188-cru-common: sync clock dt-binding header from Linux   Heiko Stübner
• [PATCH v2 0/1] sunxi: h3: Add initial ZeroPi support   Yu-Tung Chang
• [PATCH v2 0/2] AM64: Update the locations of various elements in SRAM   Aswath Govindraju
• [PATCH v2 0/2] doc: usage: man-page for ums command   Patrick Delaunay
• [PATCH v2 0/2] efi_loader: indicating capsule update results   Heinrich Schuchardt
• [PATCH v2 0/3]   Yifeng Zhao
• [PATCH v2 0/3]   Philipp Tomsich
• [PATCH v2 0/3]   Peter Robinson
• [PATCH v2 0/3] Fix CIs skipping filesystem, EFI secure boot and EFI capsule tests   Alper Nebi Yasak
• [PATCH V2 0/3] Make omap3 board functions static   Adam Ford
• [PATCH v2 0/4] mkimage: sunxi_egon: add riscv support   Icenowy Zheng
• [PATCH v2 0/5] Add SIMATIC IOT2050 board support   Jan Kiszka
• [PATCH v2 0/5] Add SIMATIC IOT2050 board support   Lokesh Vutla
• [PATCH v2 0/5] Add SIMATIC IOT2050 board support   Tom Rini
• [PATCH v2 0/5] Add SIMATIC IOT2050 board support   Jan Kiszka
• [PATCH v2 0/5] arm: dts: Add PMIC node for J7200   Gowtham Tammana
• [PATCH v2 0/5] arm: dts: Add PMIC node for J7200   Tom Rini
• [PATCH v2 0/5] arm: dts: Add PMIC node for J7200   Gowtham Tammana
• [PATCH v2 0/5] arm: dts: stm32mp157c-odyssey-som: sync SDMMC2 with Linux and TF‑A   Grzegorz Szymaszek
• [PATCH v2 0/5] remoteproc: pru: Add remoteproc support for AM65 PRUSS   Lokesh Vutla
• [PATCH v2 0/5] rockchip_sfc: add support for Rockchip SFC   Chris Morgan
• [PATCH v2 0/6] Fixes for the NXP LS1028A-QDS boards   Vladimir Oltean
• [PATCH v2 0/7] J72xx: R5 SPL DMA support post HSM Rearch   Vignesh Raghavendra
• [PATCH v2 0/7] J72xx: R5 SPL DMA support post HSM Rearch   Lokesh Vutla
• [PATCH v2 0/7] J72xx: R5 SPL DMA support post HSM Rearch   Vignesh Raghavendra
• [PATCH v2 0/7] J72xx: R5 SPL DMA support post HSM Rearch   Lokesh Vutla
• [PATCH v2 0/8] lpc32xx updates   Trevor Woerner
• [PATCH v2 0/8] rtc: davinci: add driver model support   Dario Binacchi
• [PATCH v2 0/8] rtc: davinci: add driver model support   Lokesh Vutla
• [PATCH v2 00/10] AM642-EVM: Add USB support   Aswath Govindraju
• [PATCH v2 00/10] handling all DM watchdogs in watchdog_reset()   Rasmus Villemoes
• [PATCH v2 00/10] handling all DM watchdogs in watchdog_reset()   Stefan Roese
• [PATCH v2 00/11] clk: k210: Rewrite K210 clock without CCF   Sean Anderson
• [PATCH v2 00/11] clk: k210: Rewrite K210 clock without CCF   Damien Le Moal
• [PATCH v2 00/11] clk: k210: Rewrite K210 clock without CCF   Sean Anderson
• [PATCH v2 00/11] clk: k210: Rewrite K210 clock without CCF   Leo Liang
• [PATCH v2 00/12] display_options: Start to unify print_buffer() and hexdump   Tom Rini
• [PATCH v2 00/14] board: freescale: common: Refactor I2C mux driver   Stephen Carlson
• [PATCH V2 00/46] imx: add i.MX8ULP support   Peng Fan (OSS)
• [PATCH v2 01/10] tools: k3_fit_atf: Add support for providing ATF load address using a Kconfig symbol   Aswath Govindraju
• [PATCH v2 01/10] watchdog: wdt-uclass.c: use wdt_start() in wdt_expire_now()   Simon Glass
• [PATCH v2 01/10] watchdog: wdt-uclass.c: use wdt_start() in wdt_expire_now()   Stefan Roese
• [PATCH v2 01/11] clk: Allow force setting clock defaults before relocation   Sean Anderson
• [PATCH v2 01/14] board: freescale: Refactor NXP common mux code   Stephen Carlson
• [PATCH V2 01/46] arm: imx: add i.MX8ULP basic Kconfig option   Peng Fan (OSS)
• [PATCH v2 02/10] arm: mach-k3: am642_init: Add support for USB boot mode   Aswath Govindraju
• [PATCH v2 02/10] watchdog: wdt-uclass.c: introduce struct wdt_priv   Simon Glass
• [PATCH v2 02/10] watchdog: wdt-uclass.c: introduce struct wdt_priv   Stefan Roese
• [PATCH v2 02/11] clk: k210: Rewrite to remove CCF   Sean Anderson
• [PATCH v2 02/14] board: freescale: ls1021aqds: Update I2C mux config   Stephen Carlson
• [PATCH V2 02/46] arm: imx: add i.MX8ULP cpu type and helper   Peng Fan (OSS)
• [PATCH v2 03/10] arm: mach-k3: am642_init: Do USB fixups to facilitate host and device boot modes   Aswath Govindraju
• [PATCH v2 03/10] watchdog: wdt-uclass.c: neaten UCLASS_DRIVER definition   Simon Glass
• [PATCH v2 03/10] watchdog: wdt-uclass.c: neaten UCLASS_DRIVER definition   Stefan Roese
• [PATCH v2 03/11] clk: k210: Move pll into the rest of the driver   Sean Anderson
• [PATCH v2 03/14] board: freescale: ls1043aqds: Update I2C mux config   Stephen Carlson
• [PATCH V2 03/46] arm: imx: sys_proto: move boot mode define to common header   Peng Fan (OSS)
• [PATCH v2 04/10] board: ti: am64x: Set the core voltage of USB PHY to 0.85V   Aswath Govindraju
• [PATCH v2 04/10] watchdog: wdt-uclass.c: refactor initr_watchdog()   Simon Glass
• [PATCH v2 04/10] watchdog: wdt-uclass.c: refactor initr_watchdog()   Stefan Roese
• [PATCH v2 04/11] clk: k210: Implement soc_clk_dump   Sean Anderson
• [PATCH v2 04/14] board: freescale: ls1046afrwy: Update I2C mux config   Stephen Carlson
• [PATCH V2 04/46] arm: imx8ulp: support print cpu info   Peng Fan (OSS)
• [PATCH v2 05/10] arm: dts: k3-am64-main: Add USB DT nodes   Aswath Govindraju
• [PATCH v2 05/10] watchdog: wdt-uclass.c: keep track of each device's running state   Simon Glass
• [PATCH v2 05/10] watchdog: wdt-uclass.c: keep track of each device's running state   Stefan Roese
• [PATCH v2 05/11] clk: k210: Re-add support for setting rate   Sean Anderson
• [PATCH v2 05/11] clk: k210: Re-add support for setting rate   Sean Anderson
• [PATCH v2 05/14] board: freescale: ls1046aqds: Update I2C mux config   Stephen Carlson
• [PATCH V2 05/46] imx: imx8ulp: add get reset cause   Peng Fan (OSS)
• [PATCH v2 06/10] arm: dts: k3-am642-*-evm: Add USB support   Aswath Govindraju
• [PATCH v2 06/10] sandbox: disable CONFIG_WATCHDOG_AUTOSTART   Simon Glass
• [PATCH v2 06/10] sandbox: disable CONFIG_WATCHDOG_AUTOSTART   Stefan Roese
• [PATCH v2 06/11] clk: k210: Don't set PLL rates if we are already at the correct rate   Sean Anderson
• [PATCH v2 06/14] board: freescale: ls1088a: Update I2C mux config   Stephen Carlson
• [PATCH V2 06/46] arm: imx: basic i.MX8ULP support   Peng Fan (OSS)
• [PATCH v2 07/10] arm: dts: k3-am642-evm-u-boot: Add U-Boot tags and fix the dr_mode to peripheral for USB subsystem   Aswath Govindraju
• [PATCH v2 07/10] watchdog: wdt-uclass.c: handle all DM watchdogs in watchdog_reset()   Simon Glass
• [PATCH v2 07/10] watchdog: wdt-uclass.c: handle all DM watchdogs in watchdog_reset()   Rasmus Villemoes
• [PATCH v2 07/10] watchdog: wdt-uclass.c: handle all DM watchdogs in watchdog_reset()   Stefan Roese
• [PATCH v2 07/10] watchdog: wdt-uclass.c: handle all DM watchdogs in watchdog_reset()   Simon Glass
• [PATCH v2 07/10] watchdog: wdt-uclass.c: handle all DM watchdogs in watchdog_reset()   Rasmus Villemoes
• [PATCH v2 07/10] watchdog: wdt-uclass.c: handle all DM watchdogs in watchdog_reset()   Stefan Roese
• [PATCH v2 07/11] clk: k210: Remove bypass driver   Sean Anderson
• [PATCH v2 07/14] board: freescale: ls2080aqds: Update I2C mux config   Stephen Carlson
• [PATCH V2 07/46] arm: imx8: Move container parser and image to mach-imx common folder   Peng Fan (OSS)
• [PATCH v2 08/10] configs: am64x_evm_*_defconfig: Move the SPL Load address to 0x70000000, move the ATF to a latter location and rearrange EEPROM and BSS data   Aswath Govindraju
• [PATCH v2 08/10] watchdog: add gpio watchdog driver   Simon Glass
• [PATCH v2 08/10] watchdog: add gpio watchdog driver   Stefan Roese
• [PATCH v2 08/11] clk: k210: Move k210 clock out of its own subdirectory   Sean Anderson
• [PATCH v2 08/14] board: freescale: ls2080ardb: Update I2C mux config   Stephen Carlson
• [PATCH V2 08/46] arm: imx8: Move container image header file to mach-imx   Peng Fan (OSS)
• [PATCH v2 09/10] arm: dts: k3-am64-main: Update the location of ATF in SRAM   Aswath Govindraju
• [PATCH v2 09/10] sandbox: add test of wdt_gpio driver   Simon Glass
• [PATCH v2 09/10] sandbox: add test of wdt_gpio driver   Stefan Roese
• [PATCH v2 09/11] k210: dts: Set PLL1 to the same rate as PLL0   Sean Anderson
• [PATCH v2 09/14] board: freescale: lx2160a: Update I2C mux config   Stephen Carlson
• [PATCH V2 09/46] arm: imx: parse-container: guard included header files   Peng Fan (OSS)
• [PATCH v2 1/1] bootcount: add a new driver with syscon as backend   Nandor Han
• [PATCH v2 1/1] lib: move rtc-lib.c to lib   Heinrich Schuchardt
• [PATCH v2 1/1] lib: move rtc-lib.c to lib   Bin Meng
• [PATCH v2 1/1] sunxi: h3: Add initial ZeroPi support   Yu-Tung Chang
• [PATCH v2 1/2] clk: scmi: register all scmi clock by name with CCF   Etienne Carriere
• [PATCH v2 1/2] cmd: Add dependency for ums command   Patrick Delaunay
• [PATCH v2 1/2] cmd: Add dependency for ums command   Heinrich Schuchardt
• [PATCH v2 1/2] configs: am64x_evm_a53_defconfig: Move TF-A load address to 0x701c0000   Aswath Govindraju
• [PATCH v2 1/2] configs: am64x_evm_a53_defconfig: Move TF-A load address to 0x701c0000   Suman Anna
• [PATCH v2 1/2] efi_loader: fix set_capsule_result()   Heinrich Schuchardt
• [PATCH v2 1/2] net: luton: remove address translation after ofnode_read_resource   Simon Glass
• [PATCH v2 1/2] of: addr: Translate 'dma-ranges' for parent nodes missing 'dma-ranges'   Bin Meng
• [PATCH v2 1/2] of: addr: Translate 'dma-ranges' for parent nodes missing 'dma-ranges'   Simon Glass
• [PATCH v2 1/2] of: addr: Translate 'dma-ranges' for parent nodes missing 'dma-ranges'   Simon Glass
• [PATCH v2 1/2] rockchip: rk3568: add device tree file   Kever Yang
• [PATCH V2 1/3] arm: omap3: Make try_unlock_memory() static   Adam Ford
• [PATCH v2 1/3] mmc: rockchip_sdhci: add phy and clock config for rk3399   Yifeng Zhao
• [PATCH v2 1/3] mmc: rockchip_sdhci: add phy and clock config for rk3399   Jaehoon Chung
• [PATCH v2 1/3] mmc: rockchip_sdhci: add phy and clock config for rk3399   赵仪峰
• [PATCH v2 1/3] mmc: rockchip_sdhci: add phy and clock config for rk3399   Peng Fan (OSS)
• [PATCH v2 1/3] mmc: rockchip_sdhci: add phy and clock config for rk3399   Peng Fan (OSS)
• [PATCH v2 1/3] phy-sun4i-usb: Fix sun8i_r40_cfg   qianfanguijin at 163.com
• [PATCH v2 1/3] tools: docker: Install a readable kernel for libguestfs-tools   Alper Nebi Yasak
• [PATCH v2 1/3] tools: docker: Install a readable kernel for libguestfs-tools   Heinrich Schuchardt
• [PATCH v2 1/3] tools: docker: Install a readable kernel for libguestfs-tools   Alper Nebi Yasak
• [PATCH v2 1/3] tools: docker: Install a readable kernel for libguestfs-tools   Heinrich Schuchardt
• [PATCH v2 1/4] board: freescale: t208xrdb: remove the legacy non-DM_ETH code   Camelia Groza
• [PATCH v2 1/4] board: freescale: t208xrdb: remove the legacy non-DM_ETH code   Tom Rini
• [PATCH v2 1/4] mkimage: add a flag to describe whether -A is specified   Icenowy Zheng
• [PATCH v2 1/4] mkimage: add a flag to describe whether -A is specified   Simon Glass
• [PATCH v2 1/4] mkimage: add a flag to describe whether -A is specified   Icenowy Zheng
• [PATCH v2 1/4] mkimage: add a flag to describe whether -A is specified   Simon Glass
• [PATCH v2 1/4] mkimage: add a flag to describe whether -A is specified   Icenowy Zheng
• [PATCH v2 1/4] mkimage: add a flag to describe whether -A is specified   Tom Rini
• [PATCH v2 1/4] mkimage: add a flag to describe whether -A is specified   Simon Glass
• [PATCH v2 1/4] mkimage: add a flag to describe whether -A is specified   Simon Glass
• [PATCH v2 1/5] arm: dts: Add IOT2050 device tree files   Jan Kiszka
• [PATCH v2 1/5] arm: dts: stm32mp157c-odyssey-som: fix the basic SDMMC2 properties   Grzegorz Szymaszek
• [PATCH v2 1/5] arm: dts: stm32mp157c-odyssey-som: fix the basic SDMMC2 properties   Patrice CHOTARD
• [PATCH v2 1/5] power: pmic: tps65941: Add compatible for LP876441   Gowtham Tammana
• [PATCH v2 1/5] power: pmic: tps65941: Add compatible for LP876441   Jaehoon Chung
• [PATCH v2 1/5] rockchip: rk3188-cru-common: sync clock dt-binding header from Linux   Johan Jonker
• [PATCH v2 1/5] soc: ti: pruss: Add a platform driver for PRUSS in TI SoCs   Lokesh Vutla
• [PATCH v2 1/5] spi: rockchip_sfc: add support for Rockchip SFC   Chris Morgan
• [PATCH v2 1/6] arm: dts: ls1028a: enable the switch CPU port for the LS1028A-QDS   Vladimir Oltean
• [PATCH v2 1/6] arm: dts: ls1028a: enable the switch CPU port for the LS1028A-QDS   Ramon Fried
• [PATCH v2 1/7] arm: a37xx: pci: Don't put link into LTSSM Recovery state during probe   Pali Rohár
• [PATCH v2 1/7] arm: a37xx: pci: Don't put link into LTSSM Recovery state during probe   Stefan Roese
• [PATCH v2 1/7] arm: a37xx: pci: Don't put link into LTSSM Recovery state during probe   Marek Behún
• [PATCH v2 1/7] arm: a37xx: pci: Don't put link into LTSSM Recovery state during probe   Stefan Roese
• [PATCH v2 1/7] arm: a37xx: pci: Don't put link into LTSSM Recovery state during probe   Stefan Roese
• [PATCH v2 1/7] mailbox: k3-sec-proxy: Add DM to DMSC communication thread   Vignesh Raghavendra
• [PATCH v2 1/7] nvme: Move block dev creation from uclass post_probe() to driver probe()   Bin Meng
• [PATCH v2 1/7] nvme: Move block dev creation from uclass post_probe() to driver probe()   Bin Meng
• [PATCH v2 1/8] lpc32xx: Kconfig: switch to CONFIG_CONS_INDEX   Trevor Woerner
• [PATCH v2 1/8] lpc32xx: Kconfig: switch to CONFIG_CONS_INDEX   Simon Glass
• [PATCH v2 1/8] rtc: davinci: enable compilation for omap architectures   Dario Binacchi
• [PATCH v2 10/10] configs: am64: Enable configs to support USB host and device modes   Aswath Govindraju
• [PATCH v2 10/10] sandbox: add test of wdt-uclass' watchdog_reset()   Simon Glass
• [PATCH v2 10/10] sandbox: add test of wdt-uclass' watchdog_reset()   Rasmus Villemoes
• [PATCH v2 10/10] sandbox: add test of wdt-uclass' watchdog_reset()   Simon Glass
• [PATCH v2 10/10] sandbox: add test of wdt-uclass' watchdog_reset()   Stefan Roese
• [PATCH v2 10/11] k210: Don't imply CCF   Sean Anderson
• [PATCH v2 10/14] board: freescale: t2080qds: Update I2C mux config   Stephen Carlson
• [PATCH V2 10/46] arm: imx8ulp: add container support   Peng Fan (OSS)
• [PATCH v2 11/11] test: Add K210 PLL tests to sandbox defconfigs   Sean Anderson
• [PATCH v2 11/14] board: freescale: ls2081ardb: Update I2C mux config   Stephen Carlson
• [PATCH V2 11/46] arm: imx: move container Kconfig under mach-imx   Peng Fan (OSS)
• [PATCH v2 12/14] board: freescale: lx2162aqds: Update I2C mux config   Stephen Carlson
• [PATCH V2 12/46] driver: misc: Add MU and S400 API to communicate with Sentinel   Peng Fan (OSS)
• [PATCH v2 13/14] board: freescale: ls2088aqds: Update I2C mux config   Stephen Carlson
• [PATCH V2 13/46] net: fec_mxc: support i.MX8ULP   Peng Fan (OSS)
• [PATCH v2 14/14] board: freescale: ls2088ardb: Update I2C mux config   Stephen Carlson
• [PATCH V2 14/46] pinctrl: Add pinctrl driver for imx8ulp   Peng Fan (OSS)
• [PATCH V2 15/46] driver: serial: fsl_lpuart: support i.MX8ULP   Peng Fan (OSS)
• [PATCH V2 16/17] usb: gadget: fastboot: use correct max packet size   Maxime Ripard
• [PATCH V2 16/46] arm: imx8ulp: add clock support   Peng Fan (OSS)
• [PATCH v2 17/33] dtoc: Process driver aliases along with drivers   Johan Jonker
• [PATCH v2 17/33] dtoc: Process driver aliases along with drivers   Simon Glass
• [PATCH V2 17/46] drivers: mmc: fsl_esdhc_imx: support i.MX8ULP   Peng Fan (OSS)
• [PATCH V2 18/46] arm: imx8ulp: soc: Change to use CMC1 to get bootcfg   Peng Fan (OSS)
• [PATCH V2 19/46] arm: imx8ulp: Enable full L2 cache in SPL   Peng Fan (OSS)
• [PATCH v2 2/2] arm: dts: k3-am64-main: Reserve OCMRAM for DMSC-lite and secure proxy communication   Aswath Govindraju
• [PATCH v2 2/2] arm: dts: k3-am64-main: Reserve OCMRAM for DMSC-lite and secure proxy communication   Suman Anna
• [PATCH v2 2/2] arm: dts: k3-am64-main: Reserve OCMRAM for DMSC-lite and secure proxy communication   Aswath Govindraju
• [PATCH v2 2/2] doc: usage: man-page for ums command   Patrick Delaunay
• [PATCH v2 2/2] doc: usage: man-page for ums command   Heinrich Schuchardt
• [PATCH v2 2/2] efi_loader: clear OsIndications   Heinrich Schuchardt
• [PATCH v2 2/2] efi_loader: clear OsIndications   Ilias Apalodimas
• [PATCH v2 2/2] firmware: scmi: fix sandbox and related test since clock discovery   Etienne Carriere
• [PATCH v2 2/2] of: addr: Remove call to dev_count_cells() in of_get_address()   Simon Glass
• [PATCH v2 2/2] rockchip: rk3568: add clock driver   Kever Yang
• [PATCH v2 2/2] test: add dm_test_read_resource   Simon Glass
• [PATCH V2 2/3] arm: omap3: Make secureworld_exit() static   Adam Ford
• [PATCH v2 2/3] Azure: Add fuse device for test.py tests   Alper Nebi Yasak
• [PATCH v2 2/3] mmc: rockchip_sdhci: Add support for RK3568   Yifeng Zhao
• [PATCH v2 2/3] mmc: rockchip_sdhci: Add support for RK3568   Jaehoon Chung
• [PATCH v2 2/3] mmc: rockchip_sdhci: Add support for RK3568   赵仪峰
• [PATCH v2 2/3] mmc: rockchip_sdhci: Add support for RK3568   Jaehoon Chung
• [PATCH v2 2/4] board: freescale: t208xrdb: detect the board revision version   Camelia Groza
• [PATCH v2 2/4] mkimage: sunxi_egon: refactor for multi-architecture support   Icenowy Zheng
• [PATCH v2 2/4] mkimage: sunxi_egon: refactor for multi-architecture support   Andre Przywara
• [PATCH v2 2/5] arm/dts: k3-j7200-r5-common: Add pmic lp876441 node   Gowtham Tammana
• [PATCH v2 2/5] ARM: dts: rockchip: update rk3xxx.dtsi   Johan Jonker
• [PATCH v2 2/5] arm: dts: stm32mp157c-odyssey-som: enable all SDMMC2 data lanes   Grzegorz Szymaszek
• [PATCH v2 2/5] arm: dts: stm32mp157c-odyssey-som: enable all SDMMC2 data lanes   Patrice CHOTARD
• [PATCH v2 2/5] arm: dts: stm32mp157c-odyssey-som: enable all SDMMC2 data lanes   Patrice CHOTARD
• [PATCH v2 2/5] board: siemens: Add support for SIMATIC IOT2050 devices   Jan Kiszka
• [PATCH v2 2/5] remoteproc: pru: Add support for various PRU cores on K3 AM65x SoCs   Lokesh Vutla
• [PATCH v2 2/5] rockchip: px30: Add support for using SFC   Chris Morgan
• [PATCH v2 2/5] usb: gadget: Add bcdDevice for the DWC2 USB Gadget Controller   Patrice CHOTARD
• [PATCH v2 2/6] arm: dts: ls1028a: enable internal RGMII delays for the LS1028A-QDS AR8035 PHY   Vladimir Oltean
• [PATCH v2 2/7] firmware: ti_sci: Implement GET_RANGE with static data   Vignesh Raghavendra
• [PATCH v2 2/7] nvme: Skip block device creation for inactive namespaces   Bin Meng
• [PATCH v2 2/8] lpc32xx: import device tree from Linux   Trevor Woerner
• [PATCH v2 2/8] rtc: davinci: fix compiler errors   Dario Binacchi
• [PATCH V2 20/46] arm: imx8ulp: disable wdog3   Peng Fan (OSS)
• [PATCH V2 21/46] arm: imx8ulp: Update the reset vector in u-boot   Peng Fan (OSS)
• [PATCH V2 22/46] drivers: misc: s400_api: Update S400_SUCCESS_IND to 0xd6   Peng Fan (OSS)
• [PATCH V2 23/46] drivers: misc: imx8ulp: Add S400 API for image authentication   Peng Fan (OSS)
• [PATCH V2 24/46] drivers: misc: imx8ulp: Update S400 API for release RDC   Peng Fan (OSS)
• [PATCH V2 25/46] drivers: misc: s400_api: Update API for fuse read and write   Peng Fan (OSS)
• [PATCH V2 26/46] arm: imx8ulp: release and configure XRDC at early phase   Peng Fan (OSS)
• [PATCH V2 27/46] arm: imx8ulp: add rdc support   Peng Fan (OSS)
• [PATCH V2 28/46] arm: imx8ulp: add trdc release request   Peng Fan (OSS)
• [PATCH V2 29/46] arm: imx8ulp: release trdc and assign lpav from RTD to APD   Peng Fan (OSS)
• [PATCH V2 3/3] arm: omap3: Make secure_unlock_mem() static   Adam Ford
• [PATCH v2 3/3] Azure: Add loop devices and CAP_SYS_ADMIN for sandbox test.py tests   Alper Nebi Yasak
• [PATCH v2 3/3] rockchip: config: evb-rk3399: add hs200 and hs400 support   Yifeng Zhao
• [PATCH v2 3/3] rockchip: config: evb-rk3399: add hs200 and hs400 support   Philipp Tomsich
• [PATCH v2 3/4] board: freescale: t208xrdb: add Linux fdt fix-ups for rev D   Camelia Groza
• [PATCH v2 3/4] board: fsl: lx2160ardb: add dts fixup function for RevC   Priyanka Jain
• [PATCH v2 3/4] mkimage: sunxi_egon: add support for riscv   Icenowy Zheng
• [PATCH v2 3/4] mkimage: sunxi_egon: add support for riscv   Andre Przywara
• [PATCH v2 3/5] arm/dts: k3-j7200-r5-common: Add VTM node   Gowtham Tammana
• [PATCH v2 3/5] arm64: dts: ti: k3-am65-mcu: Add RTI watchdog entry   Jan Kiszka
• [PATCH v2 3/5] arm: dts: k3-am654-base-board: Add r5 specific u-boot dtsi   Lokesh Vutla
• [PATCH v2 3/5] arm: dts: stm32mp157c-odyssey-som: set the SDMMC2 VQMMC supply   Grzegorz Szymaszek
• [PATCH v2 3/5] arm: dts: stm32mp157c-odyssey-som: set the SDMMC2 VQMMC supply   Patrice CHOTARD
• [PATCH v2 3/5] arm: dts: stm32mp157c-odyssey-som: set the SDMMC2 VQMMC supply   Patrice CHOTARD
• [PATCH v2 3/5] rockchip: px30: add the serial flash controller   Chris Morgan
• [PATCH v2 3/5] rockchip: rk3188-power: sync power domain dt-binding header from Linux   Johan Jonker
• [PATCH v2 3/5] usb: sandbox: Add gadget callbacks   Patrice CHOTARD
• [PATCH v2 3/5] usb: sandbox: Add gadget callbacks   Simon Glass
• [PATCH v2 3/6] arm: dts: ls1028a: declare the fixed-link speeds for the internal ENETC ports   Vladimir Oltean
• [PATCH v2 3/7] firmware: ti_sci: Add support for Resoure Management at R5 SPL stage.   Vignesh Raghavendra
• [PATCH v2 3/7] nvme: Eliminate the offset of one during block dev creation   Bin Meng
• [PATCH v2 3/8] arm: lpc32xx: add EA LPC3250 DevKitv2 board support   Trevor Woerner
• [PATCH v2 3/8] rtc: davinci: replace 32bit access with 8bit access   Dario Binacchi
• [PATCH V2 30/46] imx8ulp: unify rdc functions   Peng Fan (OSS)
• [PATCH V2 31/46] arm: imx8ulp: Probe the S400 MU device in arch init   Peng Fan (OSS)
• [PATCH V2 32/46] arm: iMX8ULP: Add boot device relevant functions   Peng Fan (OSS)
• [PATCH V2 33/46] arm: imx8ulp: Allocate DCNANO and MIPI_DSI to AD domain   Peng Fan (OSS)
• [PATCH V2 34/46] arm: imx8ulp: add dummy imx_get_mac_from_fuse   Peng Fan (OSS)
• [PATCH V2 35/46] arm: imx8ulp: add iomuxc support   Peng Fan (OSS)
• [PATCH V2 36/46] driver: misc: imx8ulp: Add fuse driver for imx8ulp   Peng Fan (OSS)
• [PATCH V2 37/46] imx8ulp: soc: correct reset cause   Peng Fan (OSS)
• [PATCH V2 38/46] imx8ulp: Use DGO_GP5 to get boot config   Peng Fan (OSS)
• [PATCH V2 39/46] imx8ulp: Add workaround for eMMC boot   Peng Fan (OSS)
• [PATCH v2 4/4] board: freescale: t208xrdb: add a config option for rev D dts fixups   Camelia Groza
• [PATCH v2 4/4] sunxi: specify architecture when generating SPL boot image   Icenowy Zheng
• [PATCH v2 4/4] sunxi: specify architecture when generating SPL boot image   Andre Przywara
• [PATCH v2 4/5] arm/dts: k3-j7200-r5-common: Hook buck1_reg to vtm supply   Gowtham Tammana
• [PATCH v2 4/5] ARM: dts: rockchip: update rk3188.dtsi   Johan Jonker
• [PATCH v2 4/5] arm: dts: stm32mp157c-odyssey-som: enable the SDMMC2 eMMC HS DDR mode   Grzegorz Szymaszek
• [PATCH v2 4/5] arm: dts: stm32mp157c-odyssey-som: enable the SDMMC2 eMMC HS DDR mode   Patrice CHOTARD
• [PATCH v2 4/5] arm: dts: stm32mp157c-odyssey-som: enable the SDMMC2 eMMC HS DDR mode   Patrice CHOTARD
• [PATCH v2 4/5] arm: dts: ti: k3-am65-main: Add ICSSG nodes   Lokesh Vutla
• [PATCH v2 4/5] watchdog: rti_wdt: Add support for loading firmware   Jan Kiszka
• [PATCH v2 4/5] watchdog: rti_wdt: Add support for loading firmware   Lokesh Vutla
• [PATCH v2 4/5] watchdog: rti_wdt: Add support for loading firmware   Jan Kiszka
• [PATCH v2 4/5] watchdog: rti_wdt: Add support for loading firmware   Tom Rini
• [PATCH v2 4/5] watchdog: rti_wdt: Add support for loading firmware   Jan Kiszka
• [PATCH v2 4/5] watchdog: rti_wdt: Add support for loading firmware   Jan Kiszka
• [PATCH v2 4/5] watchdog: rti_wdt: Add support for loading firmware   Lokesh Vutla
• [PATCH v2 4/5] watchdog: rti_wdt: Add support for loading firmware   Tom Rini
• [PATCH v2 4/5] watchdog: rti_wdt: Add support for loading firmware   Simon Glass
• [PATCH v2 4/5] watchdog: rti_wdt: Add support for loading firmware   Jan Kiszka
• [PATCH v2 4/5] watchdog: rti_wdt: Add support for loading firmware   Simon Glass
• [PATCH v2 4/5] watchdog: rti_wdt: Add support for loading firmware   Tom Rini
• [PATCH v2 4/5] watchdog: rti_wdt: Add support for loading firmware   Simon Glass
• [PATCH v2 4/5] watchdog: rti_wdt: Add support for loading firmware   Jan Kiszka
• [PATCH v2 4/6] arm: dts: ls1028a: disable enetc-2 by default   Vladimir Oltean
• [PATCH v2 4/7] ARM: dts: j72xx-r5-common-proc-board: Add DM firmware node   Vignesh Raghavendra
• [PATCH v2 4/7] nvme: Drop useless members of 'struct nvme_ns'   Bin Meng
• [PATCH v2 4/8] lpc32xx: i2c: remove unused define   Trevor Woerner
• [PATCH v2 4/8] rtc: davinci: check BUSY bit before set TC registers   Dario Binacchi
• [PATCH V2 40/46] mx7ulp: Update unlock and refresh sequences in sWDOG driver   Peng Fan (OSS)
• [PATCH V2 41/46] mx7ulp: wdog: Wait for WDOG unlock and reconfiguration to complete   Peng Fan (OSS)
• [PATCH V2 42/46] imx8ulp: move struct mu_type to common header   Peng Fan (OSS)
• [PATCH V2 43/46] imx8ulp: add upower api support   Peng Fan (OSS)
• [PATCH V2 44/46] ddr: Add DDR driver for iMX8ULP   Peng Fan (OSS)
• [PATCH V2 45/46] arm: dts: add i.MX8ULP dtsi   Peng Fan (OSS)
• [PATCH V2 46/46] arm: imx: add i.MX8ULP EVK support   Peng Fan (OSS)
• [PATCH v2 5/5] ARM: dts: rockchip: update rk3188-radxarock.dts   Johan Jonker
• [PATCH v2 5/5] arm: dts: stm32mp157c-odyssey-som: enable SDMMC2 in SPL   Grzegorz Szymaszek
• [PATCH v2 5/5] arm: dts: stm32mp157c-odyssey-som: enable SDMMC2 in SPL   Patrice CHOTARD
• [PATCH v2 5/5] configs: am65x_evm_a53: Enable PRUSS remoteproc   Lokesh Vutla
• [PATCH v2 5/5] configs: iot2050: Enable watchdog support, but do not auto-start it   Jan Kiszka
• [PATCH v2 5/5] configs: j7200_evm_r5_defconfig: Enable AVS, PMIC and dependent configs   Gowtham Tammana
• [PATCH v2 5/6] drivers: net: fsl_enetc: require a PHY device when probing   Vladimir Oltean
• [PATCH v2 5/7] ARM: dts: k3: Add cfg register space for ringacc and udmap   Vignesh Raghavendra
• [PATCH v2 5/7] nvme: Don't clear nvme blk device's priv space   Bin Meng
• [PATCH v2 5/8] lpc32xx: i2c: fix base address   Trevor Woerner
• [PATCH v2 5/8] rtc: davinci: use unlock/lock mechanism   Dario Binacchi
• [PATCH v2 6/6] drivers: net: fsl_enetc: force the RGMII MAC speed/duplex instead of using in-band signaling   Vladimir Oltean
• [PATCH v2 6/6] drivers: net: fsl_enetc: force the RGMII MAC speed/duplex instead of using in-band signaling   Ramon Fried
• [PATCH v2 6/6] drivers: net: fsl_enetc: force the RGMII MAC speed/duplex instead of using in-band signaling   Vladimir Oltean
• [PATCH v2 6/6] drivers: net: fsl_enetc: force the RGMII MAC speed/duplex instead of using in-band signaling   Ramon Fried
• [PATCH v2 6/7] doc: develop: Convert README.nvme to reST   Bin Meng
• [PATCH v2 6/7] soc: ti: k3-navss-ringacc: Add support for native configuration of rings   Vignesh Raghavendra
• [PATCH v2 6/8] arm: dts: sync rtc node of am335x boards with Linux 5.9-rc7   Dario Binacchi
• [PATCH v2 6/8] lpc32xx: i2c: finish DM/OF code   Trevor Woerner
• [PATCH v2 7/7] dma: ti: k3-udma: Add support for native configuration of chan/flow   Vignesh Raghavendra
• [PATCH v2 7/7] MAINTAINERS: Add an entry for NVMe   Bin Meng
• [PATCH v2 7/7] MAINTAINERS: Add an entry for NVMe   Tom Rini
• [PATCH v2 7/8] Kconfig: convert CONFIG_SYS_I2C_LPC32XX   Trevor Woerner
• [PATCH v2 7/8] Kconfig: convert CONFIG_SYS_I2C_LPC32XX   Simon Glass
• [PATCH v2 7/8] rtc: davinci: add driver model support   Dario Binacchi
• [PATCH v2 8/8] lpc32xx: ea-lpc3250devkitv2: enable i2c (DM)   Trevor Woerner
• [PATCH v2 8/8] rtc: davinci: fix date loaded on reset   Dario Binacchi
• [PATCH v2] arm: imx: imx8mm: correct unrecognized fracpll frequency   sbabic at denx.de
• [PATCH V2] ARM: rmobile: beacon-renesom: Enable QSPI NOR Flash   Adam Ford
• [PATCH V2] ARM: rmobile: beacon: Set CONFIG_RZ_G2 on Beacon boards   Adam Ford
• [PATCH V2] ARM: rmobile: beacon: Set CONFIG_RZ_G2 on Beacon boards   Marek Vasut
• [PATCH v2] armv8: lx2160ardb: Add thermal node fixup for revc board   Wasim Khan
• [PATCH v2] board: sl28: add DSA support for variant 2   Michael Walle
• [PATCH v2] board: sl28: add DSA support for variant 2   Michael Walle
• [PATCH v2] board: sl28: add DSA support for variant 2   Vladimir Oltean
• [PATCH v2] board: sl28: add DSA support for variant 2   Michael Walle
• [PATCH V2] clk: clk_versaclock: Add support for versaclock driver   Adam Ford
• [PATCH V2] clk: clk_versaclock: Add support for versaclock driver   Sean Anderson
• [PATCH v2] cmd:Elaborate 'blkcache' cmd HELP statement   opensource.kab at gmail.com
• [PATCH v2] cmd: net: add a 'net list' command to list network devs   Tim Harvey
• [PATCH v2] cmd: net: add a 'net list' command to list network devs   Ramon Fried
• [PATCH v2] cmd: net: add a 'net list' command to list network devs   Ramon Fried
• [PATCH v2] cmd: net: add a 'net list' command to list network devs   Tim Harvey
• [PATCH v2] cmd: net: add a 'net list' command to list network devs   Ramon Fried
• [PATCH v2] disk: part_dos: update partition table entries after write   Da Xue
• [PATCH v2] disk: part_dos: update partition table entries after write   Tom Rini
• [PATCHv2] drivers: tpm2: update reset gpio semantics   Jorge Ramirez-Ortiz
• [PATCHv2] drivers: tpm2: update reset gpio semantics   Michal Simek
• [PATCHv2] drivers: tpm2: update reset gpio semantics   Jorge Ramirez-Ortiz, Foundries
• [PATCHv2] drivers: tpm2: update reset gpio semantics   Michal Simek
• [PATCHv2] drivers: tpm2: update reset gpio semantics   Jorge Ramirez-Ortiz, Foundries
• [PATCH v2] efi_loader: Allow capsule update on-disk without checking OsIndications   Ilias Apalodimas
• [PATCH v2] efi_loader: Improve the parameter check for QueryVariableInfo()   Masami Hiramatsu
• [PATCH v2] efi_loader: Improve the parameter check for QueryVariableInfo()   Heinrich Schuchardt
• [PATCH v2] fastboot: Fix overflow when calculating chunk size   Tom Rini
• [PATCH v2] imx8mn: configs: add support for distro boot commands   sbabic at denx.de
• [PATCH v2] imx: Add SeeedStudio NPI-IMX6ULL Support   sbabic at denx.de
• [PATCH V2] MAINTAINER, git-mailrc: Update the mmc maintainer   Jaehoon Chung
• [PATCH V2] MAINTAINER, git-mailrc: Update the mmc maintainer   Bin Meng
• [PATCH V2] MAINTAINER, git-mailrc: Update the mmc maintainer   Jaehoon Chung
• [PATCH v2] mtd: spinand: macronix: Add support for serial NAND flash   Jaime Liao
• [PATCH v2] mtd: spinand: macronix: Add support for serial NAND flash   Jaime Liao
• [PATCH v2] mtd: spinand: macronix: Add support for serial NAND flash   Jagan Teki
• [PATCHv2] net: convert TFTP_TSIZE to proper Kconfig option   Tom Rini
• [PATCH v2] net: octeontx: smi: use dt live tree API   Tim Harvey
• [PATCH v2] net: octeontx: smi: use dt live tree API   Ramon Fried
• [PATCH v2] net: octeontx: smi: use dt live tree API   Ramon Fried
• [PATCH v2] net: tsec: add option to set device max-speed via dts   Aleksandar Gerasimovski
• [PATCH v2] net: tsec: add option to set device max-speed via dts   Bin Meng
• [PATCH v2] Nokia RX-51: Enable CONFIG_WDT to remove deprecation warning   Lokesh Vutla
• [PATCH v2] Nokia RX-51: Enable CONFIG_WDT to remove deprecation warning   Pali Rohár
• [PATCH v2] Nokia RX-51: Enable CONFIG_WDT to remove deprecation warning   Lokesh Vutla
• [PATCH v2] Revert "mmc: fsl_esdhc_imx: use VENDORSPEC_FRC_SDCLK_ON to control card clock output"   Fabio Estevam
• [PATCH v2] Revert "mmc: fsl_esdhc_imx: use VENDORSPEC_FRC_SDCLK_ON to control card clock output"   Bough Chen
• [PATCH v2] Revert "mmc: fsl_esdhc_imx: use VENDORSPEC_FRC_SDCLK_ON to control card clock output"   Fabio Estevam
• [PATCH v2] Revert "mmc: fsl_esdhc_imx: use VENDORSPEC_FRC_SDCLK_ON to control card clock output"   Jaehoon Chung
• [PATCH v2] Revert "mmc: fsl_esdhc_imx: use VENDORSPEC_FRC_SDCLK_ON to control card clock output"   Fabio Estevam
• [PATCH v2] Revert "mmc: fsl_esdhc_imx: use VENDORSPEC_FRC_SDCLK_ON to control card clock output"   Jaehoon Chung
• [PATCH v2] Revert "mmc: fsl_esdhc_imx: use VENDORSPEC_FRC_SDCLK_ON to control card clock output"   Bough Chen
• [PATCH v2] Revert "mmc: fsl_esdhc_imx: use VENDORSPEC_FRC_SDCLK_ON to control card clock output"   Fabio Estevam
• [PATCH v2] Revert "mmc: fsl_esdhc_imx: use VENDORSPEC_FRC_SDCLK_ON to control card clock output"   Peng Fan (OSS)
• [PATCH v2] Revert "mmc: fsl_esdhc_imx: use VENDORSPEC_FRC_SDCLK_ON to control card clock output"   Fabio Estevam
• [PATCH v2] Revert "mmc: fsl_esdhc_imx: use VENDORSPEC_FRC_SDCLK_ON to control card clock output"   Jaehoon Chung
• [PATCH v2] Revert "mmc: fsl_esdhc_imx: use VENDORSPEC_FRC_SDCLK_ON to control card clock output"   Pierre-Jean Texier
• [PATCH v2] Revert "mmc: fsl_esdhc_imx: use VENDORSPEC_FRC_SDCLK_ON to control card clock output"   Fabio Estevam
• [PATCH v2] Revert "mmc: fsl_esdhc_imx: use VENDORSPEC_FRC_SDCLK_ON to control card clock output"   Peng Fan (OSS)
• [PATCH v2] riscv: andes_plic: Fix riscv_get_ipi() mask   Bin Meng
• [PATCH v2] riscv: sifive: Set default fdtfile names   Dimitri John Ledkov
• [PATCH v2] serial: zynq: Add support for serial parameters   Kunihiko Hayashi
• [PATCH v2] serial: zynq: Add support for serial parameters   Michal Simek
• [PATCH V2] spi: Update speed/mode on change   Marek Vasut
• [PATCH V2] spi: Update speed/mode on change   Tom Rini
• [PATCH v2] sunxi: clock: H6/H616: Fix PLL clock factor encodings   Jernej Škrabec
• [PATCH v2] x86: Discard .note.gnu.property sections   Bin Meng
• [PATCH v2] x86: Discard .note.gnu.property sections   Bin Meng
• [PATCHv2] zynqmp: spl: support DRAM ECC initialization   Jorge Ramirez-Ortiz
• [PATCHv2] zynqmp: spl: support DRAM ECC initialization   Michal Simek
• [PATCH v3 0/3] Add hs400 support for rk3399 and rk3568   Yifeng Zhao
• [PATCH v3 0/3] Fix CIs skipping filesystem, EFI secure boot and EFI capsule tests   Alper Nebi Yasak
• [PATCH v3 0/5] Add SIMATIC IOT2050 board support   Jan Kiszka
• [PATCH v3 0/5] rockchip_sfc: add support for Rockchip SFC   Chris Morgan
• [PATCH v3 0/7] Fixes for the NXP LS1028A-QDS boards   Vladimir Oltean
• [PATCH v3 0/7] Fixes for the NXP LS1028A-QDS boards   Ramon Fried
• [PATCH v3 0/8] common: Introduce crypt-style password support   Steffen Jaeckel
• [PATCH v3 00/10] AM642-EVM: Add USB support   Aswath Govindraju
• [PATCH v3 00/10] AM642-EVM: Add USB support   Praneeth Bajjuri
• [PATCH v3 00/10] AM642-EVM: Add USB support   Aswath Govindraju
• [PATCH v3 00/10] AM642-EVM: Add USB support   Praneeth Bajjuri
• [PATCH v3 00/10] AM642-EVM: Add USB support   Praneeth Bajjuri
• [PATCH v3 00/10] AM642-EVM: Add USB support   Aswath Govindraju
• [PATCH v3 00/10] AM642-EVM: Add USB support   Lokesh Vutla
• [PATCH v3 00/11] clk: k210: Rewrite K210 clock without CCF   Sean Anderson
• [PATCH v3 00/11] clk: k210: Rewrite K210 clock without CCF   Lukasz Majewski
• [PATCH v3 00/11] clk: k210: Rewrite K210 clock without CCF   Sean Anderson
• [PATCH v3 00/11] clk: k210: Rewrite K210 clock without CCF   Sean Anderson
• [PATCH v3 00/11] clk: k210: Rewrite K210 clock without CCF   Damien Le Moal
• [PATCH v3 00/16] misc: Some more misc patches   Simon Glass
• [PATCH v3 00/19] am335x, guardian: update board specific changes   Lokesh Vutla
• [PATCH v3 01/10] tools: k3_fit_atf: Add support for providing ATF load address using a Kconfig symbol   Aswath Govindraju
• [PATCH v3 01/11] clk: Allow force setting clock defaults before relocation   Sean Anderson
• [PATCH v3 01/16] pci: Use const for pci_find_device_id() etc.   Simon Glass
• [PATCH v3 01/22] arm: imxrt: soc: make mpu regions generic   sbabic at denx.de
• [PATCH v3 02/10] arm: mach-k3: am642_init: Add support for USB boot mode   Aswath Govindraju
• [PATCH v3 02/11] clk: k210: Rewrite to remove CCF   Sean Anderson
• [PATCH v3 02/11] clk: k210: Rewrite to remove CCF   Leo Liang
• [PATCH v3 02/16] x86: pci: Allow binding of some devices before relocation   Simon Glass
• [PATCH v3 02/22] timer: imx-gpt: Add timer support for i.MX SoCs family   sbabic at denx.de
• [PATCH v3 03/10] arm: mach-k3: am642_init: Do USB fixups to facilitate host and device boot modes   Aswath Govindraju
• [PATCH v3 03/11] clk: k210: Move pll into the rest of the driver   Sean Anderson
• [PATCH v3 03/11] clk: k210: Move pll into the rest of the driver   Leo Liang
• [PATCH v3 03/16] x86: Allow coreboot serial driver to guess the UART   Simon Glass
• [PATCH v3 03/22] ARM: dts: imxrt1020: add node label to osc   sbabic at denx.de
• [PATCH v3 04/10] board: ti: am64x: Set the core voltage of USB PHY to 0.85V   Aswath Govindraju
• [PATCH v3 04/11] clk: k210: Implement soc_clk_dump   Sean Anderson
• [PATCH v3 04/11] clk: k210: Implement soc_clk_dump   Leo Liang
• [PATCH v3 04/16] spi: ich: Don't require the PCH   Simon Glass
• [PATCH v3 04/16] spi: ich: Don't require the PCH   Jagan Teki
• [PATCH v3 04/22] ARM: dts: imxrt1020: add gpt1 node   sbabic at denx.de
• [PATCH v3 05/10] arm: dts: k3-am64-main: Add USB DT nodes   Aswath Govindraju
• [PATCH v3 05/11] clk: k210: Re-add support for setting rate   Sean Anderson
• [PATCH v3 05/11] clk: k210: Re-add support for setting rate   Leo Liang
• [PATCH v3 05/16] tpm: cr50: Drop unnecessary coral headers   Simon Glass
• [PATCH v3 05/22] ARM: dts: imxrt1020-evk: enable gpt1 timer   sbabic at denx.de
• [PATCH v3 06/10] arm: dts: k3-am642-*-evm: Add USB support   Aswath Govindraju
• [PATCH v3 06/11] clk: k210: Don't set PLL rates if we are already at the correct rate   Sean Anderson
• [PATCH v3 06/11] clk: k210: Don't set PLL rates if we are already at the correct rate   Leo Liang
• [PATCH v3 06/16] x86: Don't set up MTRRs if previously done   Simon Glass
• [PATCH v3 06/22] ARM: dts: imxrt1020-evk: set gpt1 as tick-timer for u-boot   sbabic at denx.de
• [PATCH v3 07/10] arm: dts: k3-am642-evm-u-boot: Add U-Boot tags and fix the dr_mode to peripheral for USB subsystem   Aswath Govindraju
• [PATCH v3 07/11] clk: k210: Remove bypass driver   Sean Anderson
• [PATCH v3 07/11] clk: k210: Remove bypass driver   Leo Liang
• [PATCH v3 07/16] x86: Update the MP constants to avoid conflicts   Simon Glass
• [PATCH v3 07/22] ARM: dts: imxrt1020-evk-u-boot: make gpt1 present for SPL   sbabic at denx.de
• [PATCH v3 08/10] configs: am64x_evm_*_defconfig: Rearrange the components in SRAM to satisfy the limitations for USB DFU boot mode   Aswath Govindraju
• [PATCH v3 08/11] clk: k210: Move k210 clock out of its own subdirectory   Sean Anderson
• [PATCH v3 08/11] clk: k210: Move k210 clock out of its own subdirectory   Leo Liang
• [PATCH v3 08/16] x86: Do cache set-up by default when booting from coreboot   Simon Glass
• [PATCH v3 08/22] ARM: dts: imxrt1020-evk: add device_type = "memory" to memory node   sbabic at denx.de
• [PATCH v3 09/10] arm: dts: k3-am64-main: Update the location of ATF in SRAM and increase its max size   Aswath Govindraju
• [PATCH v3 09/11] k210: dts: Set PLL1 to the same rate as PLL0   Sean Anderson
• [PATCH v3 09/11] k210: dts: Set PLL1 to the same rate as PLL0   Leo Liang
• [PATCH v3 09/16] x86: coreboot: Show the BIOS date   Simon Glass
• [PATCH v3 09/22] configs: imxrt1020-evk: enable imx gpt timer as tick-timer   sbabic at denx.de
• [PATCH v3 1/3] mmc: rockchip_sdhci: add phy and clock config for rk3399   Yifeng Zhao
• [PATCH v3 1/3] mmc: rockchip_sdhci: add phy and clock config for rk3399   Jaehoon Chung
• [PATCHv3 1/3] pci: pcie_dw_rockchip: Fixed the below compilation error   Anand Moon
• [PATCHv3 1/3] pci: pcie_dw_rockchip: Fixed the below compilation error   Patrick Wildt
• [PATCHv3 1/3] pci: pcie_dw_rockchip: Fixed the below compilation error   Kever Yang
• [PATCH v3 1/3] tools: docker: Install a readable kernel for libguestfs-tools   Alper Nebi Yasak
• [PATCH v3 1/5] arm: dts: Add IOT2050 device tree files   Jan Kiszka
• [PATCH v3 1/5] spi: rockchip_sfc: add support for Rockchip SFC   Chris Morgan
• [PATCH v3 1/7] arm: dts: ls1028a: enable the switch CPU port for the LS1028A-QDS   Vladimir Oltean
• [PATCH v3 1/7] arm: dts: ls1028a: enable the switch CPU port for the LS1028A-QDS   Ramon Fried
• [PATCH v3 1/8] lib: add crypt subsystem   Steffen Jaeckel
• [PATCH v3 10/10] configs: am64: Enable configs to support USB host and device modes   Aswath Govindraju
• [PATCH v3 10/11] k210: Don't imply CCF   Sean Anderson
• [PATCH v3 10/11] k210: Don't imply CCF   Leo Liang
• [PATCH v3 10/16] x86: coral: Allow booting from coreboot   Simon Glass
• [PATCH v3 10/22] ARM: dts: imxrt1050: add node label to osc   sbabic at denx.de
• [PATCH v3 11/11] test: Add K210 PLL tests to sandbox defconfigs   Sean Anderson
• [PATCH v3 11/16] x86: Add function comments to cb_sysinfo.h   Simon Glass
• [PATCH v3 11/22] ARM: dts: imxrt1050: add gpt1 node   sbabic at denx.de
• [PATCH v3 12/16] x86: coreboot: Use vendor in the Kconfig   Simon Glass
• [PATCH v3 12/22] ARM: dts: imxrt1050-evk: enable gpt1 timer   sbabic at denx.de
• [PATCH v3 13/16] x86: coreboot: Document the memory map   Simon Glass
• [PATCH v3 13/22] ARM: dts: imxrt1050-evk: set gpt1 as tick-timer for u-boot   sbabic at denx.de
• [PATCH v3 14/16] x86: cros: Check ROM exists before building vboot   Simon Glass
• [PATCH v3 14/22] ARM: dts: imxrt1050-evk-u-boot: make gpt1 present for SPL   sbabic at denx.de
• [PATCH v3 15/16] dtoc: Check that a parent is not missing   Simon Glass
• [PATCH v3 15/22] ARM: dts: imxrt1050-evk: add device_type = "memory" to memory node   sbabic at denx.de
• [PATCH v3 16/16] doc: Update documentation for cros-2021.04 release   Simon Glass
• [PATCH v3 16/22] configs: imxrt1050-evk: enable imx gpt timer as tick-timer   sbabic at denx.de
• [PATCH v3 17/22] video: mxsfb: add enabling of "axi" clock other than "per" clock   sbabic at denx.de
• [PATCH v3 18/22] video: mxsfb: add enabling of "disp_axi" clock   sbabic at denx.de
• [PATCH v3 19/22] clk: imx: clk-imxrt1050: introduce LCDIF_PIX and rename LCDIF to LCDIF_APB   sbabic at denx.de
• [PATCH v3 2/3] Azure: Add fuse device for test.py tests   Alper Nebi Yasak
• [PATCH v3 2/3] mmc: rockchip_sdhci: Add support for RK3568   Yifeng Zhao
• [PATCH v3 2/3] mmc: rockchip_sdhci: Add support for RK3568   Jaehoon Chung
• [PATCHv3 2/3] pci: pcie_dw_rockchip: Drop the unused variable warning   Anand Moon
• [PATCHv3 2/3] pci: pcie_dw_rockchip: Drop the unused variable warning   Patrick Wildt
• [PATCHv3 2/3] pci: pcie_dw_rockchip: Drop the unused variable warning   Kever Yang
• [PATCH v3 2/5] board: siemens: Add support for SIMATIC IOT2050 devices   Jan Kiszka
• [PATCH v3 2/5] rockchip: px30: Add support for using SFC   Chris Morgan
• [PATCH v3 2/7] arm: dts: ls1028a: enable internal RGMII delays for the LS1028A-QDS AR8035 PHY   Vladimir Oltean
• [PATCH v3 2/7] arm: dts: ls1028a: enable internal RGMII delays for the LS1028A-QDS AR8035 PHY   Ramon Fried
• [PATCH v3 2/8] lib: wrap crypt API to hide errno usage   Steffen Jaeckel
• [PATCH v3 20/22] ARM: dts: imxrt1050: move lcdif assigned clock to dtsi   sbabic at denx.de
• [PATCH v3 21/22] ARM: dts: imxrt1050: set lcdif clocks according to mxsfb driver   sbabic at denx.de
• [PATCH v3 22/22] ARM: dts: imxrt1050-evk: remove u-boot,dm-spl   sbabic at denx.de
• [PATCH v3 3/3] Azure: Add loop devices and CAP_SYS_ADMIN for sandbox test.py tests   Alper Nebi Yasak
• [PATCH v3 3/3] Azure: Add loop devices and CAP_SYS_ADMIN for sandbox test.py tests   Simon Glass
• [PATCH v3 3/3] Azure: Add loop devices and CAP_SYS_ADMIN for sandbox test.py tests   Tom Rini
• [PATCH v3 3/3] Azure: Add loop devices and CAP_SYS_ADMIN for sandbox test.py tests   Simon Glass
• [PATCHv3 3/3] pci: pcie_dw_rockchip: Replace msleep occurences by udelay   Anand Moon
• [PATCHv3 3/3] pci: pcie_dw_rockchip: Replace msleep occurences by udelay   Patrick Wildt
• [PATCHv3 3/3] pci: pcie_dw_rockchip: Replace msleep occurences by udelay   Anand Moon
• [PATCHv3 3/3] pci: pcie_dw_rockchip: Replace msleep occurences by udelay   Kever Yang
• [PATCH v3 3/3] rockchip: config: evb-rk3399: add hs400 and SDMA support   Yifeng Zhao
• [PATCH v3 3/5] arm64: dts: ti: k3-am65-mcu: Add RTI watchdog entry   Jan Kiszka
• [PATCH v3 3/5] rockchip: px30: add the serial flash controller   Chris Morgan
• [PATCH v3 3/7] arm: dts: ls1028a: declare the fixed-link speeds for the internal ENETC ports   Vladimir Oltean
• [PATCH v3 3/7] arm: dts: ls1028a: declare the fixed-link speeds for the internal ENETC ports   Ramon Fried
• [PATCH v3 3/8] common: integrate crypt-based passwords   Steffen Jaeckel
• [PATCH v3 4/5] mtd: spi-nor-ids: Add XTX XT25F128B   Chris Morgan
• [PATCH v3 4/5] watchdog: rti_wdt: Add support for loading firmware   Jan Kiszka
• [PATCH v3 4/7] arm: dts: ls1028a: disable enetc-2 by default   Vladimir Oltean
• [PATCH v3 4/7] arm: dts: ls1028a: disable enetc-2 by default   Ramon Fried
• [PATCH v3 4/8] common: Rename macro appropriately   Steffen Jaeckel
• [PATCH v3 5/5] configs: iot2050: Enable watchdog support, but do not auto-start it   Jan Kiszka
• [PATCH v3 5/5] rockchip: px30: add support for SFC for Odroid Go Advance   Chris Morgan
• [PATCH v3 5/7] net: enetc: require a PHY device when probing   Vladimir Oltean
• [PATCH v3 5/7] net: enetc: require a PHY device when probing   Ramon Fried
• [PATCH v3 5/8] common: allow disabling of timeout for password entry   Steffen Jaeckel
• [PATCH v3 6/7] net: enetc: force the RGMII MAC speed/duplex instead of using in-band signaling   Vladimir Oltean
• [PATCH v3 6/7] net: enetc: force the RGMII MAC speed/duplex instead of using in-band signaling   Ramon Fried
• [PATCH v3 6/8] common: add AUTOBOOT_FLUSH_STDIN option   Steffen Jaeckel
• [PATCH v3 6/8] common: add AUTOBOOT_FLUSH_STDIN option   Simon Glass
• [PATCH v3 7/7] net: enetc: propagate the return code from phy_startup() to eth_ops::start   Vladimir Oltean
• [PATCH v3 7/7] net: enetc: propagate the return code from phy_startup() to eth_ops::start   Ramon Fried
• [PATCH v3 7/8] common: add support to fallback to plain SHA256   Steffen Jaeckel
• [PATCH v3 7/8] common: add support to fallback to plain SHA256   Simon Glass
• [PATCH v3 8/8] test: add first autoboot unit tests   Steffen Jaeckel
• [PATCH v3 8/8] test: add first autoboot unit tests   Simon Glass
• [PATCH V3] clk: clk_versaclock: Add support for versaclock driver   Adam Ford
• [PATCH V3] clk: clk_versaclock: Add support for versaclock driver   Sean Anderson
• [PATCH V3] clk: clk_versaclock: Add support for versaclock driver   Adam Ford
• [PATCH V3] clk: clk_versaclock: Add support for versaclock driver   Sean Anderson
• [PATCH v3] cmd: net: add a 'net list' command to list network devs   Tim Harvey
• [PATCH v3] cmd: net: add a 'net list' command to list network devs   Ramon Fried
• [PATCHv3] drivers: tpm2: update reset gpio semantics   Jorge Ramirez-Ortiz
• [PATCHv3] drivers: tpm2: update reset gpio semantics   Michal Simek
• [PATCH V3] MAINTAINER, git-mailrc: Update the mmc maintainer   Jaehoon Chung
• [PATCH V3] MAINTAINER, git-mailrc: Update the mmc maintainer   Peng Fan (OSS)
• [PATCH V3] MAINTAINER, git-mailrc: Update the mmc maintainer   Tom Rini
• [PATCH v3] net: tsec: add option to set device max-speed via dts   Aleksandar Gerasimovski
• [PATCH v3] net: tsec: add option to set device max-speed via dts   Ramon Fried
• [PATCH v3] usb: dfu: Migrate CONFIG_SYS_DFU_DATA_BUF_SIZE and CONFIG_SYS_DFU_MAX_FILE_SIZE to Kconfig   Aswath Govindraju
• [PATCH v3] usb: dfu: Migrate CONFIG_SYS_DFU_DATA_BUF_SIZE and CONFIG_SYS_DFU_MAX_FILE_SIZE to Kconfig   Matthias Brugger
• [PATCH v3] usb: dfu: Migrate CONFIG_SYS_DFU_DATA_BUF_SIZE and CONFIG_SYS_DFU_MAX_FILE_SIZE to Kconfig   Lukasz Majewski
• [PATCH v3] usb: dfu: Migrate CONFIG_SYS_DFU_DATA_BUF_SIZE and CONFIG_SYS_DFU_MAX_FILE_SIZE to Kconfig   Aswath Govindraju
• [PATCH v3] usb: dfu: Migrate CONFIG_SYS_DFU_DATA_BUF_SIZE and CONFIG_SYS_DFU_MAX_FILE_SIZE to Kconfig   Tom Rini
• [PATCH v3] usb: dfu: Migrate CONFIG_SYS_DFU_DATA_BUF_SIZE and CONFIG_SYS_DFU_MAX_FILE_SIZE to Kconfig   Tom Rini
• [PATCHv4,1/1] clk: zynq: Add clock wizard driver   Zhengxun Li
• [PATCHv4,1/1] clk: zynq: Add clock wizard driver   Sean Anderson
• [PATCH v4 0/2] log: Allow multiple lines and conversion to printf()   Tom Rini
• [PATCH v4 0/3] Add reboot mode support   Nandor Han
• [PATCH v4 0/5] rockchip_sfc: add support for Rockchip SFC   Chris Morgan
• [PATCH v4 0/5] rockchip_sfc: add support for Rockchip SFC   Kever Yang
• [PATCH v4 0/5] rockchip_sfc: add support for Rockchip SFC   Chris Morgan
• [PATCH v4 0/7] arm: cache: cp15: don't map reserved region with no-map property   Tom Rini
• [PATCH v4 00/18] am335x, guardian: update board specific changes   Gireesh.Hiremath at in.bosch.com
• [PATCHv4 00/26] J72xx: HSM rearch support series   Lokesh Vutla
• [PATCH v4 01/18] configs: am335x_guardian: Enable clock driver   Gireesh.Hiremath at in.bosch.com
• [PATCH v4 02/18] am335x, guardian: mem: Add board dependent mem values   Gireesh.Hiremath at in.bosch.com
• [PATCH v4 03/18] configs: am335x_guardian: add ubi fastmap support   Gireesh.Hiremath at in.bosch.com
• [PATCH v4 04/18] am335x, guardian: set tftp_load_addr in environment   Gireesh.Hiremath at in.bosch.com
• [PATCH v4 05/18] configs: am335x_guardian: add memtest configs   Gireesh.Hiremath at in.bosch.com
• [PATCH v4 06/18] am335x, guardian: Update pinmux configuration   Gireesh.Hiremath at in.bosch.com
• [PATCH v4 07/18] am335x, guardian: set environment variable autoload to no   Gireesh.Hiremath at in.bosch.com
• [PATCH v4 08/18] am335x, guardian: code cleanup and boot optimization   Gireesh.Hiremath at in.bosch.com
• [PATCH v4 09/18] configs: am335x_guardian: set boot delay   Gireesh.Hiremath at in.bosch.com
• [PATCHv4 1/3] pci: pcie_dw_rockchip: Fixed the below compilation error   Anand Moon
• [PATCHv4 1/3] pci: pcie_dw_rockchip: Fixed the below compilation error   Kever Yang
• [PATCH v4 1/3] reboot-mode: add support for reboot mode control   Nandor Han
• [PATCH v4 1/3] reboot-mode: add support for reboot mode control   Simon Glass
• [PATCH v4 1/5] spi: rockchip_sfc: add support for Rockchip SFC   Chris Morgan
• [PATCH v4 10/18] configs: am335x_guardian: disable spl command   Gireesh.Hiremath at in.bosch.com
• [PATCH v4 11/18] am335x, guardian: update swi logic   Gireesh.Hiremath at in.bosch.com
• [PATCH v4 12/18] am335x, guardian: Enable backlight   Gireesh.Hiremath at in.bosch.com
• [PATCH v4 13/18] configs: am335x_guardian: Enable display config   Gireesh.Hiremath at in.bosch.com
• [PATCH v4 14/18] drivers: video: hx8238 fix build bug   Gireesh.Hiremath at in.bosch.com
• [PATCH v4 15/18] am335x, guardian: Enable panel driver Himax HX8238D   Gireesh.Hiremath at in.bosch.com
• [PATCH v4 16/18] am335x, guardian: software update available status is stored in AM3352 RTC scracth register   Gireesh.Hiremath at in.bosch.com
• [PATCH v4 17/18] configs: am335x_guardian: Enable bootcount nvmem support   Gireesh.Hiremath at in.bosch.com
• [PATCH v4 18/18] configs: am335x_guardian: add register maps support   Gireesh.Hiremath at in.bosch.com
• [PATCHv4 2/3] pci: pcie_dw_rockchip: Drop the unused variable warning   Anand Moon
• [PATCHv4 2/3] pci: pcie_dw_rockchip: Drop the unused variable warning   Kever Yang
• [PATCH v4 2/3] reboot-mode: read the boot mode from GPIOs status   Nandor Han
• [PATCH v4 2/3] reboot-mode: read the boot mode from GPIOs status   Simon Glass
• [PATCH v4 2/5] rockchip: px30: Add support for using SFC   Chris Morgan
• [PATCHv4 3/3] pci: pcie_dw_rockchip: Replace msleep occurences by udelay   Anand Moon
• [PATCHv4 3/3] pci: pcie_dw_rockchip: Replace msleep occurences by udelay   Kever Yang
• [PATCH v4 3/3] reboot-mode: read the boot mode from RTC memory   Nandor Han
• [PATCH v4 3/3] reboot-mode: read the boot mode from RTC memory   Simon Glass
• [PATCH v4 3/3] reboot-mode: read the boot mode from RTC memory   Nandor Han
• [PATCH v4 3/5] rockchip: px30: add the serial flash controller   Chris Morgan
• [PATCH v4 4/5] mtd: spi-nor-ids: Add XTX XT25F128B   Chris Morgan
• [PATCH v4 4/5] mtd: spi-nor-ids: Add XTX XT25F128B   Chris Morgan
• [PATCH v4 5/5] ARM: dts: stm32mp: Add OP-TEE reserved memory to SPL dtb   Patrick DELAUNAY
• [PATCH v4 5/5] rockchip: px30: add support for SFC for Odroid Go Advance   Chris Morgan
• [PATCH V4] clk: clk_versaclock: Add support for versaclock driver   Adam Ford
• [PATCH V4] clk: clk_versaclock: Add support for versaclock driver   Sean Anderson
• [PATCH V4] clk: clk_versaclock: Add support for versaclock driver   Adam Ford
• [PATCHv4] drivers: tpm2: update reset gpio semantics   Jorge Ramirez-Ortiz
• [PATCHv4] drivers: tpm2: update reset gpio semantics   Michal Simek
• [PATCH V5 0/2] Add OpenPiton board support   Tianrui Wei
• [PATCH v5 0/2] Add Xilinx clock wizard driver support   Zhengxun
• [PATCH v5 0/4] basic support for rk3066 platform.   Paweł Jarosz
• [PATCH v5 0/5] rockchip_sfc: add support for Rockchip SFC   Jon Lin
• [PATCH v5 00/13] arm64: synquacer: Add SynQuacer/DeveloperBox support   Masami Hiramatsu
• [PATCH v5 00/13] arm64: synquacer: Add SynQuacer/DeveloperBox support   Masami Hiramatsu
• [PATCH v5 00/13] arm64: synquacer: Add SynQuacer/DeveloperBox support   Ilias Apalodimas
• [PATCHv5 00/26] Re-base / re-post of TI-K3 HSM rearch series   Tero Kristo
• [PATCHv5 00/26] Re-base / re-post of TI-K3 HSM rearch series   Lokesh Vutla
• [PATCHv5 00/26] Re-base / re-post of TI-K3 HSM rearch series   Tero Kristo
• [PATCHv5 00/26] Re-base / re-post of TI-K3 HSM rearch series   Lokesh Vutla
• [PATCHv5 00/26] Re-base / re-post of TI-K3 HSM rearch series   Tero Kristo
• [PATCHv5 00/26] Re-base / re-post of TI-K3 HSM rearch series   Lokesh Vutla
• [PATCH v5 01/13] ata: ahci-pci: Use scsi_ops to initialize ops   Masami Hiramatsu
• [PATCHv5 01/26] lib: rational: copy the rational fraction lib routines from Linux   Tero Kristo
• [PATCH v5 02/13] dm: pci: Skip setting VGA bridge bits if parent device is the host bus   Masami Hiramatsu
• [PATCHv5 02/26] arm: mach-k3: introduce new config option for sysfw split   Tero Kristo
• [PATCH v5 03/13] efi: Fix to use null handle to create new handle for efi_fmp_raw   Masami Hiramatsu
• [PATCHv5 03/26] remoteproc: k3-r5: remove sysfw PM calls if not supported   Tero Kristo
• [PATCH v5 04/13] gpio: Introduce CONFIG_GPIO_EXTRA_HEADER to cleanup #ifdefs   Masami Hiramatsu
• [PATCHv5 04/26] common: fit: Update board_fit_image_post_process() to pass fit and node_offset   Tero Kristo
• [PATCHv5 04/26] common: fit: Update board_fit_image_post_process() to pass fit and node_offset   Tero Kristo
• [PATCH v5 05/13] pci: synquacer: Add SynQuacer ECAM based PCIe driver   Masami Hiramatsu
• [PATCHv5 05/26] clk: fixed_rate: add API for directly registering fixed rate clocks   Tero Kristo
• [PATCH v5 06/13] mmc: synquacer: Add SynQuacer F_SDH30 SDHCI driver   Masami Hiramatsu
• [PATCHv5 06/26] clk: fix clock tree dump to properly dump out every registered clock   Tero Kristo
• [PATCH v5 07/13] spi: synquacer: Add HSSPI SPI controller driver for SynQuacer   Masami Hiramatsu
• [PATCHv5 07/26] clk: do not attempt to fetch clock pointer with null device   Tero Kristo
• [PATCH v5 08/13] net: synquacer: Add netsec driver   Masami Hiramatsu
• [PATCH v5 08/13] net: synquacer: Add netsec driver   Ramon Fried
• [PATCH v5 08/13] net: synquacer: Add netsec driver   Ramon Fried
• [PATCHv5 08/26] clk: add support for setting clk rate from cmdline   Tero Kristo
• [PATCH v5 09/13] i2c: synquacer: SNI Synquacer I2C controller   Masami Hiramatsu
• [PATCHv5 09/26] clk: sci-clk: fix return value of set_rate   Tero Kristo
• [PATCH v5 1/2] clk: zynq: Add clock wizard driver   Sean Anderson
• [PATCH v5 1/2] clk: zynq: Add clock wizard driver   Zhengxun
• [PATCH v5 1/2] clk: zynq: Add clock wizard driver   Zhengxun Li
• [PATCH v5 1/2] clk: zynq: Add clock wizard driver   Sean Anderson
• [PATCH V5 1/2] mmc: add OpenPiton mmc support   Tianrui Wei
• [PATCH V5 1/2] mmc: add OpenPiton mmc support   Sean Anderson
• [PATCH V5 1/2] mmc: add OpenPiton mmc support   Tianrui Wei
• [PATCH V5 1/2] mmc: add OpenPiton mmc support   Sean Anderson
• [PATCH v5 1/4] rockchip: rk3066: add grf header file   Paweł Jarosz
• [PATCH v5 1/5] spi: rockchip_sfc: add support for Rockchip SFC   Jon Lin
• [PATCH v5 10/13] ARM: dts: synquacer: Add device trees for DeveloperBox   Masami Hiramatsu
• [PATCHv5 10/26] clk: fix assigned-clocks to pass with deferring provider   Tero Kristo
• [PATCH v5 11/13] board: synquacer: Add DeveloperBox 96boards EE support   Masami Hiramatsu
• [PATCHv5 11/26] clk: fix set_rate to clean up cached rates for the hierarchy   Tero Kristo
• [PATCH v5 12/13] doc: qemu: arm64: Fix the documentation of capsule update   Masami Hiramatsu
• [PATCHv5 12/26] clk: add support for TI K3 SoC PLL   Tero Kristo
• [PATCH v5 13/13] configs: synquacer: Enable EFI capsule update support   Masami Hiramatsu
• [PATCHv5 13/26] clk: add support for TI K3 SoC clocks   Tero Kristo
• [PATCHv5 14/26] power: domain: Introduce driver for raw TI K3 PDs   Tero Kristo
• [PATCHv5 15/26] cmd: ti: pd: Add debug command for K3 power domains   Tero Kristo
• [PATCHv5 16/26] tools: k3_fit_atf: add DM binary to the FIT image   Tero Kristo
• [PATCHv5 17/26] arm: mach-k3: Add platform data for j721e and j7200   Tero Kristo
• [PATCHv5 18/26] arm: mach-k3: add support for detecting firmware images from FIT   Tero Kristo
• [PATCHv5 19/26] arm: mach-k3: do board config for PM only if supported   Tero Kristo
• [PATCH v5 2/2] dt-bindings: add xilinx clocking wizard bindings   Zhengxun
• [PATCH V5 2/2] riscv: board: Support OpenPiton SoC   Tianrui Wei
• [PATCH V5 2/2] riscv: board: Support OpenPiton SoC   Sean Anderson
• [PATCH V5 2/2] riscv: board: Support OpenPiton SoC   Tianrui Wei
• [PATCH v5 2/4] rockchip: rk3066: add clock driver for rk3066 soc   Paweł Jarosz
• [PATCH v5 2/5] rockchip: px30: Add support for using SFC   Jon Lin
• [PATCHv5 20/26] arm: mach-k3: common: Drop main r5 start   Tero Kristo
• [PATCHv5 21/26] arm: mach-k3: sysfw-loader: pass boardcfg to sciserver   Tero Kristo
• [PATCHv5 22/26] arm: mach-k3: j721e_init: Force early probe of clk-k3 driver   Tero Kristo
• [PATCHv5 23/26] configs: j721e_evm_r5: Enable raw access power management features   Tero Kristo
• [PATCHv5 24/26] configs: j7200_evm_r5: Enable raw access power management features   Tero Kristo
• [PATCHv5 25/26] board: ti: j72xx: README: update build instructions and image formats   Tero Kristo
• [PATCHv5 26/26] arm: dts: k3-j72xx: correct MCU timer1 frequency   Tero Kristo
• [PATCH v5 3/4] rockchip: rk3066: add rk3066 pinctrl driver   Paweł Jarosz
• [PATCH v5 3/5] rockchip: px30: add the serial flash controller   Jon Lin
• [PATCH v5 4/4] rockchip: rk3066: add sdram driver   Paweł Jarosz
• [PATCH v5 4/5] mtd: spi-nor-ids: Add XTX XT25F128B   Jon Lin
• [PATCH v5 5/5] rockchip: px30: add support for SFC for Odroid Go Advance   Chris Morgan
• [PATCH v5 5/5] rockchip: px30: add support for SFC for Odroid Go Advance   Jon Lin
• [PATCHv5] drivers: tpm2: update reset gpio semantics   Jorge Ramirez-Ortiz
• [PATCH v6 0/2] Add OpenPiton-riscv64 Board Support   Tianrui Wei
• [PATCH v6 0/2] Add Xilinx clock wizard driver support   Zhengxun
• [PATCH v6 0/5] rockchip_sfc: add support for Rockchip SFC   Jon Lin
• [PATCHv6 00/26] HSM rearch series for TI K3 devices   Tero Kristo
• [PATCHv6 00/26] HSM rearch series for TI K3 devices   Lokesh Vutla
• [PATCHv6 00/26] HSM rearch series for TI K3 devices   Tero Kristo
• [PATCHv6 00/26] HSM rearch series for TI K3 devices   Lokesh Vutla
• [PATCHv6 00/26] HSM rearch series for TI K3 devices   Tom Rini
• [PATCHv6 01/26] lib: rational: copy the rational fraction lib routines from Linux   Tero Kristo
• [PATCHv6 02/26] arm: mach-k3: introduce new config option for sysfw split   Tero Kristo
• [PATCHv6 03/26] remoteproc: k3-r5: remove sysfw PM calls if not supported   Tero Kristo
• [PATCHv6 04/26] common: fit: Update board_fit_image_post_process() to pass fit and node_offset   Tero Kristo
• [PATCHv6 05/26] clk: fixed_rate: add API for directly registering fixed rate clocks   Tero Kristo
• [PATCHv6 06/26] clk: fix clock tree dump to properly dump out every registered clock   Tero Kristo
• [PATCHv6 07/26] clk: do not attempt to fetch clock pointer with null device   Tero Kristo
• [PATCHv6 08/26] clk: add support for setting clk rate from cmdline   Tero Kristo
• [PATCHv6 09/26] clk: sci-clk: fix return value of set_rate   Tero Kristo
• [PATCH v6 1/2] board: riscv: add openpiton-riscv64 SoC support   Tianrui Wei
• [PATCH v6 1/2] clk: zynq: Add clock wizard driver   Sean Anderson
• [PATCH v6 1/2] clk: zynq: Add clock wizard driver   Zhengxun
• [PATCH v6 1/2] clk: zynq: Add clock wizard driver   Michal Simek
• [PATCH v6 1/5] spi: rockchip_sfc: add support for Rockchip SFC   Jon Lin
• [PATCHv6 10/26] clk: fix assigned-clocks to pass with deferring provider   Tero Kristo
• [PATCHv6 11/26] clk: fix set_rate to clean up cached rates for the hierarchy   Tero Kristo
• [PATCHv6 12/26] clk: add support for TI K3 SoC PLL   Tero Kristo
• [PATCHv6 13/26] clk: add support for TI K3 SoC clocks   Tero Kristo
• [PATCHv6 14/26] power: domain: Introduce driver for raw TI K3 PDs   Tero Kristo
• [PATCHv6 15/26] cmd: ti: pd: Add debug command for K3 power domains   Tero Kristo
• [PATCHv6 16/26] tools: k3_fit_atf: add DM binary to the FIT image   Tero Kristo
• [PATCHv6 17/26] arm: mach-k3: Add platform data for j721e and j7200   Tero Kristo
• [PATCHv6 18/26] arm: mach-k3: add support for detecting firmware images from FIT   Tero Kristo
• [PATCHv6 19/26] arm: mach-k3: do board config for PM only if supported   Tero Kristo
• [PATCH v6 2/2] dt-bindings: add xilinx clocking wizard bindings   Sean Anderson
• [PATCH v6 2/2] dt-bindings: add xilinx clocking wizard bindings   Zhengxun
• [PATCH v6 2/2] dt-bindings: add xilinx clocking wizard bindings   Sean Anderson
• [PATCH v6 2/2] dt-bindings: add xilinx clocking wizard bindings   Zhengxun Li
• [PATCH v6 2/2] dt-bindings: add xilinx clocking wizard bindings   Michal Simek
• [PATCH v6 2/2] dt-bindings: add xilinx clocking wizard bindings   Zhengxun Li
• [PATCH v6 2/2] dt-bindings: add xilinx clocking wizard bindings   Zhengxun Li
• [PATCH v6 2/2] mmc: openpiton: add piton_mmc driver   Tianrui Wei
• [PATCH v6 2/5] rockchip: px30: Add support for using SFC   Jon Lin
• [PATCHv6 20/26] arm: mach-k3: common: Drop main r5 start   Tero Kristo
• [PATCHv6 21/26] arm: mach-k3: sysfw-loader: pass boardcfg to sciserver   Tero Kristo
• [PATCHv6 22/26] arm: mach-k3: j721e_init: Force early probe of clk-k3 driver   Tero Kristo
• [PATCHv6 23/26] configs: j721e_evm_r5: Enable raw access power management features   Tero Kristo
• [PATCHv6 24/26] configs: j7200_evm_r5: Enable raw access power management features   Tero Kristo
• [PATCHv6 25/26] board: ti: j72xx: README: update build instructions and image formats   Tero Kristo
• [PATCHv6 26/26] arm: dts: k3-j72xx: correct MCU timer1 frequency   Tero Kristo
• [PATCH v6 3/5] rockchip: px30: add the serial flash controller   Jon Lin
• [PATCH v6 4/5] mtd: spi-nor-ids: Add XTX XT25F128B   Jon Lin
• [PATCH v6 5/5] rockchip: px30: add support for SFC for Odroid Go Advance   Jon Lin
• [PATCH v7 0/2] Add OpenPiton-riscv64 board support   Tianrui Wei
• [PATCH v7 1/2] board: riscv: add openpiton-riscv64 SoC support   Tianrui Wei
• [PATCH v7 2/2] mmc: openpiton: add piton_mmc driver   Tianrui Wei
• [PATCH v7] imx: support for conga-QMX8 board   sbabic at denx.de
• [PATCH v8 0/2] [RESEND PATCH v7 0/2]   Tianrui Wei
• [PATCH v8 1/2] board: riscv: add openpiton-riscv64 SoC support   Tianrui Wei
• [PATCH v8 1/2] board: riscv: add openpiton-riscv64 SoC support   Leo Liang
• [PATCH v8 1/2] board: riscv: add openpiton-riscv64 SoC support   Leo Liang
• [PATCH v8 2/2] mmc: openpiton: add piton_mmc driver   Tianrui Wei
• [PATCH v9 0/2] Add OpenPiton-riscv64 Board Support   Tianrui Wei
• [PATCH v9 0/9] mtd: spi-nor: Add support for Cypress s25hl-t/s25hs-t   tkuw584924 at gmail.com
• [PATCH v9 00/28] mtd: spi-nor-core: add xSPI Octal DTR support   Pratyush Yadav
• [PATCH v9 00/28] mtd: spi-nor-core: add xSPI Octal DTR support   Jagan Teki
• [PATCH v9 00/28] mtd: spi-nor-core: add xSPI Octal DTR support   Pratyush Yadav
• [PATCH v9 00/28] mtd: spi-nor-core: add xSPI Octal DTR support   Jagan Teki
• [PATCH v9 1/2] board: riscv: add openpiton-riscv64 SoC support   Tianrui Wei
• [PATCH v9 1/2] board: riscv: add openpiton-riscv64 SoC support   Leo Liang
• [PATCH v9 1/9] mtd: spi-nor: Add Cypress manufacturer ID   tkuw584924 at gmail.com
• [PATCH v9 1/9] mtd: spi-nor: Add Cypress manufacturer ID   Jagan Teki
• [PATCH v9 1/9] mtd: spi-nor: Add Cypress manufacturer ID   Jagan Teki
• [PATCH v9 2/2] mmc: openpiton: add piton_mmc driver   Tianrui Wei
• [PATCH v9 2/9] mtd: spi-nor-ids: Add Cypress s25hl-t/s25hs-t   tkuw584924 at gmail.com
• [PATCH v9 2/9] mtd: spi-nor-ids: Add Cypress s25hl-t/s25hs-t   Jagan Teki
• [PATCH v9 3/9] mtd: spi-nor-core: Add support for Read/Write Any Register   tkuw584924 at gmail.com
• [PATCH v9 3/9] mtd: spi-nor-core: Add support for Read/Write Any Register   Jagan Teki
• [PATCH v9 4/9] mtd: spi-nor-core: Add support for volatile QE bit   tkuw584924 at gmail.com
• [PATCH v9 4/9] mtd: spi-nor-core: Add support for volatile QE bit   Jagan Teki
• [PATCH v9 5/9] mtd: spi-nor-core: Add the ->ready() hook   tkuw584924 at gmail.com
• [PATCH v9 5/9] mtd: spi-nor-core: Add the ->ready() hook   Jagan Teki
• [PATCH v9 6/9] mtd: spi-nor-core: Read status by Read Any Register   tkuw584924 at gmail.com
• [PATCH v9 6/9] mtd: spi-nor-core: Read status by Read Any Register   Jagan Teki
• [PATCH v9 7/9] mtd: spi-nor-core: Add Cypress manufacturer ID in set_4byte   tkuw584924 at gmail.com
• [PATCH v9 7/9] mtd: spi-nor-core: Add Cypress manufacturer ID in set_4byte   Jagan Teki
• [PATCH v9 8/9] mtd: spi-nor-core: Add fixups for Cypress s25hl-t/s25hs-t   tkuw584924 at gmail.com
• [PATCH v9 8/9] mtd: spi-nor-core: Add fixups for Cypress s25hl-t/s25hs-t   Jagan Teki
• [PATCH v9 9/9] mtd: spi-nor-tiny: Add fixups for Cypress s25hl-t/s25hs-t   tkuw584924 at gmail.com
• [PATCH v9 9/9] mtd: spi-nor-tiny: Add fixups for Cypress s25hl-t/s25hs-t   Jagan Teki
• [PULL] Pull request for u-boot next / v2021.10 = u-boot-stm32-20210618   Patrice CHOTARD
• [PULL] Pull request for u-boot next / v2021.10 = u-boot-stm32-20210618   Tom Rini
• [PULL] u-boot-network/network_master   Ramon Fried
• [PULL] u-boot-network/network_master   Tom Rini
• [PULL] u-boot-network/network_master   Ramon Fried
• [PULL] u-boot-network/network_master   Tom Rini
• [PULL] u-boot-network/network_master   Ramon Fried
• [PULL] u-boot-riscv/master   Leo Liang
• [PULL] u-boot-riscv/master   Tom Rini
• [PULL] u-boot-riscv/next   Leo Liang
• [PULL] u-boot-riscv/next   Bin Meng
• [PULL] u-boot-riscv/next   Leo Liang
• [PULL] u-boot-riscv/next   Tom Rini
• [PULL] u-boot-sh/master   Marek Vasut
• [PULL] u-boot-sh/master   Tom Rini
• [PULL] u-boot-sh/master   Marek Vasut
• [PULL] u-boot-sh/master   Tom Rini
• [PULL] u-boot-sh/next   Marek Vasut
• [PULL] u-boot-sh/next   Tom Rini
• [PULL] u-boot-sh/next   Marek Vasut
• [PULL] u-boot-sh/next   Tom Rini
• [PULL] u-boot-sh/next   Tom Rini
• [PULL] u-boot-usb/master   Marek Vasut
• [PULL] u-boot-usb/master   Tom Rini
• [PULL] u-boot-usb/master   Marek Vasut
• [PULL] u-boot-usb/master   Tom Rini
• [PULL next] u-boot-atmel-2021.10-a   Eugen.Hristev at microchip.com
• [PULL next] u-boot-atmel-2021.10-a   Tom Rini
• [PULL v2] u-boot-riscv/next   Leo Liang
• [PULL v2] u-boot-riscv/next   Tom Rini
• [PULL v2] u-boot-riscv/next   Bin Meng
• [PULL v2] u-boot-riscv/next   Leo Liang
• [PULL v2] u-boot-riscv/next   Leo Liang
• [PULL v3] u-boot-riscv/next   Leo Liang
• [PULL v3] u-boot-riscv/next   Tom Rini
• [RESEND PATCH 0/6] Add support for Kontron i.MX6UL/ULL and i.MX8MM modules/boards   Frieder Schrempf
• [RESEND PATCH 1/6] mtd: spi-nor-ids: Add support for Macronix MX25V8035F and MX25R1635F   Frieder Schrempf
• [RESEND PATCH 2/6] spi: fsl_qspi: Build driver only if DM_SPI is available   Frieder Schrempf
• [RESEND PATCH 3/6] clk: imx8mm: Add SPI clocks   Frieder Schrempf
• [RESEND PATCH 4/6] imx8m: Restrict usable memory to space below 4G boundary   Frieder Schrempf
• [RESEND PATCH 5/6] imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx)   Frieder Schrempf
• [RESEND PATCH 6/6] imx: imx8mm: Add support for Kontron Electronics SL/BL i.MX8M-Mini boards (N801x)   Frieder Schrempf
• [RESEND PATCH 6/6] imx: imx8mm: Add support for Kontron Electronics SL/BL i.MX8M-Mini boards (N801x)   Frieder Schrempf
• [RESEND PATCH 6/6] imx: imx8mm: Add support for Kontron Electronics SL/BL i.MX8M-Mini boards (N801x)   Stefano Babic
• [RESEND PATCH v2 0/2] clk: rockchip: rk3568: add clock driver   Elaine Zhang
• [RESEND PATCH v2 1/2] rockchip: rk3568: add device tree file   Kever Yang
• [RESEND PATCH v2 1/2] rockchip: rk3568: add device tree file   Elaine Zhang
• [RESEND PATCH v2 2/2] rockchip: rk3568: add clock driver   Kever Yang
• [RESEND PATCH v2 2/2] rockchip: rk3568: add clock driver   Elaine Zhang
• [RESEND PATCH v2 2/2] rockchip: rk3568: add clock driver   Kever Yang
• [RESEND PATCH v2 2/2] rockchip: rk3568: add clock driver   Elaine Zhang
• [RESEND PATCH v6 0/2] Add OpenPiton-riscv64 Board Support   Tianrui Wei
• [RESEND PATCH v6 1/2] board: riscv: add openpiton-riscv64 SoC support   Tianrui Wei
• [RESEND PATCH v6 2/2] mmc: openpiton: add piton_mmc driver   Tianrui Wei
• [RESEND PATCH v6 2/2] mmc: openpiton: add piton_mmc driver   Jaehoon Chung
• [RESEND PATCH v6 2/2] mmc: openpiton: add piton_mmc driver   Tianrui Wei
• [RESEND PATCH v6 2/2] mmc: openpiton: add piton_mmc driver   Jaehoon Chung
• [RESEND PATCH v6 2/2] mmc: openpiton: add piton_mmc driver   Tianrui Wei
• [RESEND PATCH v7 0/2] Add OpenPiton-riscv64 Board Support   Tianrui Wei
• [RESEND PATCH v7 1/2] board: riscv: add openpiton-riscv64 SoC support   Tianrui Wei
• [RESEND PATCH v7 2/2] mmc: openpiton: add piton_mmc driver   Tianrui Wei
• [RESEND PATCH v7 2/2] mmc: openpiton: add piton_mmc driver   Jaehoon Chung
• [Resend PULL] Please pull mmc-2021-6-22   Peng Fan (OSS)
• [Resend PULL] Please pull mmc-2021-6-22   Tom Rini
• [RFC 0/5] rockchip_sfc: add support for Rockchip SFC   Kever Yang
• [RFC 0/5] rockchip_sfc: add support for Rockchip SFC   Chris Morgan
• [RFC 0/5] rockchip_sfc: add support for Rockchip SFC   Kever Yang
• [RFC 0/5] rockchip_sfc: add support for Rockchip SFC   林鼎强
• [RFC 0/5] rockchip_sfc: add support for Rockchip SFC   Chris Morgan
• [RFC 0/5] rockchip_sfc: add support for Rockchip SFC   Jon Lin
• [RFC 0/5] rockchip_sfc: add support for Rockchip SFC   Chris Morgan
• [RFC] nvme errors on QEMU   Heinrich Schuchardt
• [RFC]uboot Perform code coverage statistics   Cixi Geng
• [RFC PATCH 0/1] cmd: nvedit: Forbid environment key to be empty.   Francis Laniel
• [RFC PATCH 0/3] fastboot: sunxi: Determine MMC device at runtime   Maxime Ripard
• [RFC PATCH 0/3] fastboot: sunxi: Determine MMC device at runtime   Sean Anderson
• [RFC PATCH 0/4] mkimage: sunxi_egon: add riscv support   Icenowy Zheng
• [RFC PATCH 1/1] cmd: nvedit: Forbid key to be empty.   Francis Laniel
• [RFC PATCH 1/1] cmd: nvedit: Forbid key to be empty.   Francis Laniel
• [RFC PATCH 1/1] cmd: nvedit: Forbid key to be empty.   Wolfgang Denk
• [RFC PATCH 1/1] cmd: nvedit: Forbid key to be empty.   Francis Laniel
• [RFC PATCH 1/4] mkimage: add a flag to describe whether -A is specified   Icenowy Zheng
• [RFC PATCH 1/4] mkimage: add a flag to describe whether -A is specified   Tom Rini
• [RFC PATCH 1/4] mkimage: add a flag to describe whether -A is specified   Simon Glass
• [RFC PATCH 2/4] mkimage: sunxi_egon: refactor for multi-architecture support   Icenowy Zheng
• [RFC PATCH 2/4] mkimage: sunxi_egon: refactor for multi-architecture support   Tom Rini
• [RFC PATCH 3/4] mkimage: sunxi_egon: add support for riscv   Icenowy Zheng
• [RFC PATCH 4/4] sunxi: specify architecture when generating SPL boot image   Icenowy Zheng
• [RFC PATCH] dfu: handle short frame result of UPLOAD in state_dfu_idle   Patrick Delaunay
• [RFC PATCH v1 0/6] add rk3318 A95X Z2 board   Johan Jonker
• [RFC PATCH v1 1/6] arm: dts: rockchip: update rk3328.dtsi   Johan Jonker
• [RFC PATCH v1 2/6] arm: dts: rockchip: remove usb_host0_xhci node from rk3328-u-boot.dtsi   Johan Jonker
• [RFC PATCH v1 3/6] arm: dts: rockchip: move mmc aliases to board files   Johan Jonker
• [RFC PATCH v1 4/6] arm: dts: rockchip: move spi0 u-boot, dm-pre-reloc and alias to rk3328 board files   Johan Jonker
• [RFC PATCH v1 5/6] rockchip: rk3318: add a95x-z2-rk3318_defconfig file   Johan Jonker
• [RFC PATCH v1 6/6] arm: dts: rockchip: add rk3318 A95X Z2 board   Johan Jonker
• [RFC PATCH v1] phy: rockchip: add basic rk3328 support to phy-rockchip-inno-usb2.c   Johan Jonker
• [RFC PATCH v2 0/1] cmd: nvedit: Forbid environment key to be empty.   Francis Laniel
• [RFC PATCH v2 1/1] cmd: nvedit: Forbid key to be empty.   Francis Laniel
• [RFC PATCH v2 1/1] cmd: nvedit: Forbid key to be empty.   Wolfgang Denk
• [RFC PATCH v2 1/1] cmd: nvedit: Forbid key to be empty.   Francis Laniel
• [RFCv2] TEST: Move to gcc-11.0 prerelease and LLVM-11   Tom Rini
• [RFCv3] Azure/GitLab: Move to gcc-11.1.0 and LLVM-11   Tom Rini
• [RFCv3] Azure/GitLab: Move to gcc-11.1.0 and LLVM-11   Bin Meng
• [RFCv3] Azure/GitLab: Move to gcc-11.1.0 and LLVM-11   Tom Rini
• [RFCv3] Azure/GitLab: Move to gcc-11.1.0 and LLVM-11   Bin Meng
• [RFCv3] Azure/GitLab: Move to gcc-11.1.0 and LLVM-11   Tom Rini
• [RFCv3] Azure/GitLab: Move to gcc-11.1.0 and LLVM-11   Bin Meng
• [RFCv3] Azure/GitLab: Move to gcc-11.1.0 and LLVM-11   Tom Rini
• [RFCv3] Azure/GitLab: Move to gcc-11.1.0 and LLVM-11   Bin Meng
• [RFT PATCH] riscv: andes_plic: Fix riscv_get_ipi() mask   Bin Meng
• [RFT PATCH] riscv: andes_plic: Fix riscv_get_ipi() mask   Bin Meng
• [RFT PATCH] riscv: andes_plic: Fix riscv_get_ipi() mask   Rick Chen
• [TF-A] Proposal: TF-A to adopt hand-off blocks (HOBs) for information passing between boot stages   Joanna Farley
• [TF-A] Proposal: TF-A to adopt hand-off blocks (HOBs) for information passing between boot stages   Joanna Farley
• [TF-A] Proposal: TF-A to adopt hand-off blocks (HOBs) for information passing between boot stages   Manish Pandey2
• [TF-A] Proposal: TF-A to adopt hand-off blocks (HOBs) for information passing between boot stages   François Ozog
• [TF-A] Proposal: TF-A to adopt hand-off blocks (HOBs) for information passing between boot stages   Simon Glass
• [TF-A] Proposal: TF-A to adopt hand-off blocks (HOBs) for information passing between boot stages   François Ozog
• [TF-A] Proposal: TF-A to adopt hand-off blocks (HOBs) for information passing between boot stages   raghu.ncstate at icloud.com
• [TF-A] Proposal: TF-A to adopt hand-off blocks (HOBs) for information passing between boot stages   Ron Minnich
• [TF-A] Proposal: TF-A to adopt hand-off blocks (HOBs) for information passing between boot stages   Simon Glass
• [TF-A] Proposal: TF-A to adopt hand-off blocks (HOBs) for information passing between boot stages   Tom Rini
• [TF-A] Proposal: TF-A to adopt hand-off blocks (HOBs) for information passing between boot stages   François Ozog
• [TF-A] Proposal: TF-A to adopt hand-off blocks (HOBs) for information passing between boot stages   Alexander Graf
• [TF-A] Proposal: TF-A to adopt hand-off blocks (HOBs) for information passing between boot stages   François Ozog
• [U-Boot] [PATCH 02/20] rockchip: video: Correct VOP clock selection   SHAHZAD ALI
• [U-Boot] [PATCH v3 13/20] spl: nand: sunxi: use PIO instead of DMA   Maxime Ripard
• [Uboot-stm32] [PATCH 01/10] stm32mp: stm32prog: remove all the header check for UART download   Patrice CHOTARD
• [Uboot-stm32] [PATCH 02/10] stm32mp: stm32prog: add timeout in stm32prog_serial_get_buffer   Patrice CHOTARD
• [Uboot-stm32] [PATCH 03/10] stm32mp: stm32prog: add support of initrd in flashlayout   Patrice CHOTARD
• [Uboot-stm32] [PATCH 04/10] stm32mp: stm32prog: solve compilation with CONFIG_FIT_SIGNATURE   Patrice CHOTARD
• [Uboot-stm32] [PATCH 05/10] stm32mp: stm32prog: handle the next phase after USB re-enumeration   Patrice CHOTARD
• [Uboot-stm32] [PATCH 06/10] stm32mp: stm32prog: correctly handle DM_PMIC   Patrice CHOTARD
• [Uboot-stm32] [PATCH 07/10] stm32mp: stm32prog: use get_cpu_dev for GetID command   Patrice CHOTARD
• [Uboot-stm32] [PATCH 08/10] stm32mp: stm32prog: change one message level to debug   Patrice CHOTARD
• [Uboot-stm32] [PATCH 09/10] dfu: add error callback   Patrice CHOTARD
• [Uboot-stm32] [PATCH] board: stm32mp1: correct the property name for eth   Patrice CHOTARD
• [Uboot-stm32] [PATCH] clk: cosmetic change in uclass   Patrice CHOTARD
• [Uboot-stm32] [PATCH] clk: cosmetic change in uclass   Patrice CHOTARD
• [Uboot-stm32] [PATCH] dfu: dfu_mtd: set max_buf_size to erasesize also for NOR devices   Patrick DELAUNAY
• [Uboot-stm32] [PATCH] dfu: dfu_mtd: set max_buf_size to erasesize also for NOR devices   Lukasz Majewski
• [Uboot-stm32] [PATCH] dfu: dfu_mtd: set max_buf_size to erasesize also for NOR devices   Patrice CHOTARD
• [Uboot-stm32] [PATCH v2 4/5] arm: dts: stm32mp157c-odyssey-som: enable the SDMMC2 eMMC HS DDR mode   Patrice CHOTARD
• [v10,14/27] mtd: spi-nor-core: Add support for DTR protocol   jaimeliao at mxic.com.tw
• [v2, 0/3] Drop CONFIG_FSL_ESDHC_VS33_NOT_SUPPORT   Yangbo Lu
• [v2, 1/3] mmc: fsl_esdhc: convert to CONFIG_FSL_ESDHC_VS33_NOT_SUPPORT   Yangbo Lu
• [v2, 1/3] mmc: fsl_esdhc: convert to CONFIG_FSL_ESDHC_VS33_NOT_SUPPORT   Jaehoon Chung
• [v2, 1/3] mmc: fsl_esdhc: convert to CONFIG_FSL_ESDHC_VS33_NOT_SUPPORT   Y.b. Lu
• [v2, 2/3] mmc: fsl_esdhc_imx: drop CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33   Yangbo Lu
• [v2, 3/3] armv8: layerscape: drop CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33   Yangbo Lu
• [v2, 3/3] armv8: layerscape: drop CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33   Michael Walle
• [v2, 3/3] armv8: layerscape: drop CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33   Y.b. Lu
• [v2 04/17] arm: socfpga: Add handoff data support for Intel N5X device   Simon Glass
• [v2 04/17] arm: socfpga: Add handoff data support for Intel N5X device   Chee, Tien Fong
• [v2 12/17] ddr: altera: Add SDRAM driver for Intel N5X device   Chee, Tien Fong
• [v2 12/17] ddr: altera: Add SDRAM driver for Intel N5X device   Chee, Tien Fong
• [v2 PATCH 1/3] board: freescale: LX2160ARDB: Add MAINTAINER   Wasim Khan
• [v2 PATCH 2/3] board: freescale: LX2160AQDS: Add MAINTAINER   Wasim Khan
• [v3, 0/3] Drop CONFIG_FSL_ESDHC_VS33_NOT_SUPPORT   Yangbo Lu
• [v3, 1/3] mmc: fsl_esdhc: convert to CONFIG_FSL_ESDHC_VS33_NOT_SUPPORT   Yangbo Lu
• [v3, 1/3] mmc: fsl_esdhc: convert to CONFIG_FSL_ESDHC_VS33_NOT_SUPPORT   Jaehoon Chung
• [v3, 2/3] mmc: fsl_esdhc_imx: drop CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33   Yangbo Lu
• [v3, 3/3] armv8: layerscape: drop CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33   Yangbo Lu
• [v3, 3/3] armv8: layerscape: drop CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33   Michael Walle
• [v3 00/17] Add Intel N5X SoC support   Siew Chin Lim
• [v3 01/17] arm: socfpga: Move linux_qspi_enable from bootcommand to board_prep_linux function   Siew Chin Lim
• [v3 02/17] arm: socfpga: Changed base_addr_s10.h to base_addr_soc64.h   Siew Chin Lim
• [v3 03/17] arm: socfpga: Add base address for Intel N5X device   Siew Chin Lim
• [v3 04/17] arm: socfpga: Add handoff data support for Intel N5X device   Siew Chin Lim
• [v3 05/17] drivers: clk: Add clock driver for Intel N5X device   Siew Chin Lim
• [v3 06/17] arm: socfpga: Get clock manager base address for Intel N5X device   Siew Chin Lim
• [v3 07/17] drivers: clk: Add memory clock driver for Intel N5X device   Siew Chin Lim
• [v3 08/17] arm: socfpga: Move cm_get_mpu_clk_hz function declaration to clock_manager.h   Siew Chin Lim
• [v3 09/17] arm: socfpga: Add clock manager for Intel N5X device   Siew Chin Lim
• [v3 10/17] arm: socfpga: Changed misc_s10.c to misc_soc64.c   Siew Chin Lim
• [v3 11/17] ddr: socfpga: Enable memory test on memory size less than 1GB   Siew Chin Lim
• [v3 12/17] ddr: altera: Add SDRAM driver for Intel N5X device   Siew Chin Lim
• [v3 13/17] arm: socfpga: Add SPL for Intel N5X device   Siew Chin Lim
• [v3 14/17] board: intel: Add socdk board support for Intel N5X device   Siew Chin Lim
• [v3 15/17] arm: dts: Add base dtsi and devkit dts for Intel N5X device   Siew Chin Lim
• [v3 16/17] include: configs: Add Intel N5X device CONFIGs   Siew Chin Lim
• [v3 17/17] arm: socfpga: Enable Intel N5X device build   Siew Chin Lim
• [v9,23/28] mtd: spi-nor-core: Perform a Soft Reset on shutdown   jaimeliao at mxic.com.tw
• [v9,23/28] mtd: spi-nor-core: Perform a Soft Reset on shutdown   Pratyush Yadav
• Announcing a tool for Armada 3720 firmware   Marek Behun
• AST 2600 loading issues   Manu Anand
• BISECTED f3866909e350 ("distro_bootcmd: call EFI bootmgr even without having /EFI/boot")   Matwey V. Kornilov
• BISECTED f3866909e350 ("distro_bootcmd: call EFI bootmgr even without having /EFI/boot")   Heinrich Schuchardt
• BISECTED f3866909e350 ("distro_bootcmd: call EFI bootmgr even without having /EFI/boot")   Matwey V. Kornilov
• BISECTED f3866909e350 ("distro_bootcmd: call EFI bootmgr even without having /EFI/boot")   Heinrich Schuchardt
• BISECTED f3866909e350 ("distro_bootcmd: call EFI bootmgr even without having /EFI/boot")   Heinrich Schuchardt
• BISECTED f3866909e350 ("distro_bootcmd: call EFI bootmgr even without having /EFI/boot")   Matwey V. Kornilov
• BISECTED f3866909e350 ("distro_bootcmd: call EFI bootmgr even without having /EFI/boot")   Matwey V. Kornilov
• BISECTED f3866909e350 ("distro_bootcmd: call EFI bootmgr even without having /EFI/boot")   Heinrich Schuchardt
• BISECTED f3866909e350 ("distro_bootcmd: call EFI bootmgr even without having /EFI/boot")   Heinrich Schuchardt
• BISECTED f3866909e350 ("distro_bootcmd: call EFI bootmgr even without having /EFI/boot")   Matwey V. Kornilov
• BISECTED f3866909e350 ("distro_bootcmd: call EFI bootmgr even without having /EFI/boot")   Matwey V. Kornilov
• BISECTED f3866909e350 ("distro_bootcmd: call EFI bootmgr even without having /EFI/boot")   AKASHI Takahiro
• BISECTED f3866909e350 ("distro_bootcmd: call EFI bootmgr even without having /EFI/boot")   Matwey V. Kornilov
• BISECTED f3866909e350 ("distro_bootcmd: call EFI bootmgr even without having /EFI/boot")   AKASHI Takahiro
• Boeing Engineer - Help Needed (URGENT)   Su (US), Nelson Z
• Boeing Engineer - Help Needed (URGENT)   Alex G.
• Boot stops on RPi4 yocto/hardknott (u-boot 2021.01)   Morten Bruun
• Boot stops on RPi4 yocto/hardknott (u-boot 2021.01)   Peter Robinson
• Building U-Boot for Compulab's imx8mm-cl-iot-gate board   Fabio Estevam
• buildman error   Wasim Khan
• buildman error   Alper Nebi Yasak
• Cannot build with SPI_SUNXI   Daniel Maslowski
• Cannot build with SPI_SUNXI   Andre Przywara
• Contributor call today   Simon Glass
• DENX : layers to be reused   Stefano Babic
• doc/usage:Warning from PATMAN tool prevents uploading a cmd-usage help file for askenv   Adarsh Babu Kalepalli
• doc/usage:Warning from PATMAN tool prevents uploading a cmd-usage help file for askenv   Heinrich Schuchardt
• DTB_RESELECT/MULTI DTB with SPL flow   Michal Simek
• DTB_RESELECT/MULTI DTB with SPL flow   Simon Glass
• DTB_RESELECT/MULTI DTB with SPL flow   Michal Simek
• EFI from usb HDD   Michal Simek
• EFI from usb HDD   Heinrich Schuchardt
• EFI from usb HDD   Michal Simek
• EFI from usb HDD   Heinrich Schuchardt
• EFI from usb HDD   Michal Simek
• EFI from usb HDD   AKASHI Takahiro
• get_default_envs.sh broken in master   Jan Kiszka
• get_default_envs.sh broken in master   Tom Rini
• i.MX6UL: U-boot 2018.03 instability issue   Rosario Borsellino
• i.MX6UL: U-boot 2018.03 instability issue   Sean Anderson
• i.MX6UL: U-boot 2018.03 instability issue   Michael Nazzareno Trimarchi
• imx8qxp mek: Booting mainline kernel with mainline U-Boot   vmuthusu
• Multi-Soc binary support for i.MX8M Mini/Nano/Plus/? in single boot firmware binary   Stefano Babic
• Multi-Soc binary support for i.MX8M Mini/Nano/Plus/? in single boot firmware binary   Peng Fan (OSS)
• Multi-Soc binary support for i.MX8M Mini/Nano/Plus/? in single boot firmware binary   Tim Harvey
• Next branch is open   Tom Rini
• Please pull u-boot-dm   Simon Glass
• Please pull u-boot-dm   Tom Rini
• Please pull u-boot-marvell/master   Stefan Roese
• Please pull u-boot-marvell/master   Tom Rini
• Please pull u-boot-marvell/master   Stefan Roese
• Please pull u-boot-marvell/master   Tom Rini
• Please pull u-boot-marvell/master   Stefan Roese
• Please pull u-boot-marvell/master   Tom Rini
• Please pull u-boot-video   Anatolij Gustschin
• Please pull u-boot-video   Tom Rini
• Please pull u-boot-x86   Bin Meng
• Please pull u-boot-x86   Tom Rini
• Pull request: u-boot-imx u-boot-imx-20210616   Stefano Babic
• Pull request: u-boot-imx u-boot-imx-20210616   Tom Rini
• Pull request: u-boot-imx u-boot-imx-20210616   Stefano Babic
• Pull request: u-boot-imx u-boot-imx-20210616   Tom Rini
• Pull request: u-boot-imx u-boot-imx-20210625   Stefano Babic
• Pull request: u-boot-rockchip-20210606   Kever Yang
• Pull request: u-boot-rockchip-20210606   Tom Rini
• Pull request: u-boot-rockchip-20210618 for next   Kever Yang
• Pull request: u-boot-rockchip-20210618 for next   Tom Rini
• Pull request: u-boot-spi/master for next   Jagan Teki
• Pull request: u-boot-spi/master for next   Tom Rini
• Pull request: u-boot-spi/next for next   Jagan Teki
• Pull request: u-boot-spi/next for next   Tom Rini
• Pull request: u-boot-spi/next for next   Jagan Teki
• Pull request for efi-2021-07-rc5   Heinrich Schuchardt
• Pull request for efi-2021-07-rc5   Tom Rini
• Pull request for efi-2021-07-rc5-2   Heinrich Schuchardt
• Pull request for efi-2021-07-rc5-2   Tom Rini
• Pull request for efi-2021-07-rc5-2   Heinrich Schuchardt
• Pull request for efi-2021-07-rc5-2   Tom Rini
• pull request of u-boot-fsl-qoriq for v2021.07   Priyanka Jain
• pull request of u-boot-fsl-qoriq for v2021.07   Tom Rini
• raspberrypi cm4 devicetree missing?   Belisko Marek
• Reset cause register for Allwinner H3/R16 SOC's   Suniel Mahesh
• Reset cause register for Allwinner H3/R16 SOC's   Andre Przywara
• Reset cause register for Allwinner H3/R16 SOC's   Suniel Mahesh
• Reset cause register for Allwinner H3/R16 SOC's   Samuel Holland
• Setting serverip from DHCP server   Gregory Anders
• Splash image on phyBOARD Sargas STM32MP157   Andrey Nechypurenko
• Splash image on phyBOARD Sargas STM32MP157   Patrice CHOTARD
• SSL certificate for source.denx.de has expired   Heinrich Schuchardt
• SSL certificate for source.denx.de has expired   Alper Nebi Yasak
• Trouble running u-boot and SPL on Digilent Genesys ZU   Alvaro Gamez
• Trouble running u-boot and SPL on Digilent Genesys ZU   Alvaro Gamez
• Trouble running u-boot and SPL on Digilent Genesys ZU   Michal Simek
• Trouble running u-boot and SPL on Digilent Genesys ZU   Alvaro Gamez
• Trouble running u-boot and SPL on Digilent Genesys ZU   Michal Simek
• Trouble running u-boot and SPL on Digilent Genesys ZU   Alvaro Gamez
• U-Boot does not boot from MicroSD card >1 USB storage devices are present   Eimar Koort
• u-boot driver model: using sandbox_defconfig, “demo hello 5” got error “Command 'demo' failed: Error -22”   王洪柱
• U-Boot DSA driver for microchip KSZ9477 suggestions needed   Tim Harvey
• U-Boot DSA driver for microchip KSZ9477 suggestions needed   Vladimir Oltean
• U-Boot DSA driver for microchip KSZ9477 suggestions needed   Tim Harvey
• U-Boot DSA driver for microchip KSZ9477 suggestions needed   Vladimir Oltean
• U-Boot DSA driver for microchip KSZ9477 suggestions needed   Tim Harvey
• U-Boot DSA driver for microchip KSZ9477 suggestions needed   Vladimir Oltean
• U-Boot DSA driver for microchip KSZ9477 suggestions needed   Tim Harvey
• U-Boot DSA driver for microchip KSZ9477 suggestions needed   Vladimir Oltean
• u-boot on RPi4 32bit - issue after upgrading the firmware   Marek Szyprowski
• U-Boot zboot on x86-64 VirtualBox UEFI.   Christian Melki
• U-Boot zboot on x86-64 VirtualBox UEFI.   Simon Glass
• U-Boot zboot on x86-64 VirtualBox UEFI.   Christian Melki
• U-Boot zboot on x86-64 VirtualBox UEFI.   Simon Glass
• USB gadget regression on i.MX7   Fabio Estevam
• USB gadget regression on i.MX7   Marek Vasut
• USB gadget regression on i.MX7   Fabio Estevam
• USB gadget regression on i.MX7   Marek Vasut
• Zynq MPSoC - secure boot   Jorge Ramirez-Ortiz, Foundries
• Zynq MPSoC - secure boot   Michal Simek
• Zynq MPSoC - secure boot   Jorge Ramirez-Ortiz, Foundries
• Zynq UltraScale MPSoC, DMA driver   Jorge Ramirez-Ortiz, Foundries
• Zynq UltraScale MPSoC, DMA driver   Jorge Ramirez-Ortiz, Foundries
• Zynq UltraScale MPSoC, DMA driver   Michal Simek
• Zynq UltraScale MPSoC, DMA driver   Jorge Ramirez-Ortiz, Foundries
• Zynq UltraScale MPSoC, DMA driver   Jorge Ramirez-Ortiz, Foundries
• Zynq UltraScale MPSoC, DMA driver   Michal Simek
• 回信: Re: [PATCH] mtd: spinand: macronix: Add support for serial NAND flash   jaimeliao at mxic.com.tw
• 回信: Re: [v9,23/28] mtd: spi-nor-core: Perform a Soft Reset on shutdown   jaimeliao at mxic.com.tw
• 回信: Re: [v9,23/28] mtd: spi-nor-core: Perform a Soft Reset on shutdown   jaimeliao at mxic.com.tw
• 回信: Re: [v9,23/28] mtd: spi-nor-core: Perform a Soft Reset on shutdown   Pratyush Yadav
• 回复: [PATCH] arm: add initial support for the Phytium Pomelo Board   Nicholas zheng