[PATCH 1/3] smegw01: Allow booting the Yocto image by default

[Tom Rini]

On Tue, Jun 15, 2021 at 08:38:38PM -0300, Fabio Estevam wrote:

> On the Yocto image there is a single partition and the kernel
> and dtb are present in the 'boot' directory.
> 
> Change it accordingly so that the board can boot the Yocto
> image by default.
> 
> Use the generic 'load' command instead, which is able to
> read from an ext4 partition.
> 
> Signed-off-by: Fabio Estevam <festevam at denx.de>
> ---
>  include/configs/smegw01.h | 6 +++---
>  1 file changed, 3 insertions(+), 3 deletions(-)
> 
> diff --git a/include/configs/smegw01.h b/include/configs/smegw01.h
> index 50f00136ac46..a92c583c8669 100644
> --- a/include/configs/smegw01.h
> +++ b/include/configs/smegw01.h
> @@ -29,11 +29,11 @@
>  	"bootm_size=0x10000000\0" \
>  	"mmcdev=0\0" \
>  	"mmcpart=1\0" \
> -	"mmcroot=/dev/mmcblk0p2 rootwait rw\0" \
> +	"mmcroot=/dev/mmcblk0p1 rootwait rw\0" \
>  	"mmcargs=setenv bootargs console=${console},${baudrate} " \
>  		"root=${mmcroot}\0" \
> -	"loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
> -	"loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdtfile}\0" \
> +	"loadimage=load mmc ${mmcdev}:${mmcpart} ${loadaddr} boot/${image}\0" \
> +	"loadfdt=load mmc ${mmcdev}:${mmcpart} ${fdt_addr} boot/${fdtfile}\0" \
>  	"mmcboot=echo Booting from mmc ...; " \
>  		"run mmcargs; " \
>  		"if run loadfdt; then " \

Shouldn't this be using the generic distro boot and then generating an
extlinux.conf in OE?  Thanks!

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 659 bytes
Desc: not available
URL: <https://lists.denx.de/pipermail/u-boot/attachments/20210615/0c6317e7/attachment.sig>