[PATCH v2 4/4] board: freescale: t208xrdb: add a config option for rev D dts fixups
Camelia Groza
camelia.groza at oss.nxp.com
Fri Jun 11 14:28:08 CEST 2021
From: Camelia Groza <camelia.groza at nxp.com>
Under DM, we rely on u-boot's device tree to provide the correct PHY
addresses. The board_fix_fdt callback is intended to be used for
device tree fixups before relocation. Unfortunately, this isn't an
option when booting from flash since the device tree isn't writable
before relocation.
This patch introduces the CONFIG_T2080RDB_REV_D option to signal that a
board revision D or up is the target. The config option is used to set
the correct Aquantia PHY address in the board's u-boot device tree.
Defconfig files with the option enable explicitly are added for
convenience.
Signed-off-by: Camelia Groza <camelia.groza at nxp.com>
---
arch/powerpc/dts/t2080rdb.dts | 7 ++
board/freescale/t208xrdb/Kconfig | 4 +
configs/T2080RDB_revD_NAND_defconfig | 93 ++++++++++++++++++++++++
configs/T2080RDB_revD_SDCARD_defconfig | 90 +++++++++++++++++++++++
configs/T2080RDB_revD_SPIFLASH_defconfig | 92 +++++++++++++++++++++++
configs/T2080RDB_revD_defconfig | 77 ++++++++++++++++++++
6 files changed, 363 insertions(+)
create mode 100644 configs/T2080RDB_revD_NAND_defconfig
create mode 100644 configs/T2080RDB_revD_SDCARD_defconfig
create mode 100644 configs/T2080RDB_revD_SPIFLASH_defconfig
create mode 100644 configs/T2080RDB_revD_defconfig
diff --git a/arch/powerpc/dts/t2080rdb.dts b/arch/powerpc/dts/t2080rdb.dts
index 25f8c978c6d1..4de814ea8d9d 100644
--- a/arch/powerpc/dts/t2080rdb.dts
+++ b/arch/powerpc/dts/t2080rdb.dts
@@ -77,10 +77,17 @@
reg = <0x0>;
};
+#ifdef CONFIG_T2080RDB_REV_D
+ xg_aq1202_phy4: ethernet-phy at 8 {
+ compatible = "ethernet-phy-ieee802.3-c45";
+ reg = <0x8>;
+ };
+#else
xg_aq1202_phy4: ethernet-phy at 1 {
compatible = "ethernet-phy-ieee802.3-c45";
reg = <0x1>;
};
+#endif
};
};
};
diff --git a/board/freescale/t208xrdb/Kconfig b/board/freescale/t208xrdb/Kconfig
index 6f0b012baba3..8249c5df967a 100644
--- a/board/freescale/t208xrdb/Kconfig
+++ b/board/freescale/t208xrdb/Kconfig
@@ -9,6 +9,10 @@ config SYS_VENDOR
config SYS_CONFIG_NAME
default "T208xRDB"
+config T2080RDB_REV_D
+ bool "Support for T2080RDB revisions D and up"
+ default n
+
source "board/freescale/common/Kconfig"
endif
diff --git a/configs/T2080RDB_revD_NAND_defconfig b/configs/T2080RDB_revD_NAND_defconfig
new file mode 100644
index 000000000000..3b533a31ad00
--- /dev/null
+++ b/configs/T2080RDB_revD_NAND_defconfig
@@ -0,0 +1,93 @@
+CONFIG_PPC=y
+CONFIG_SYS_TEXT_BASE=0x00201000
+CONFIG_SPL_LIBCOMMON_SUPPORT=y
+CONFIG_SPL_LIBGENERIC_SUPPORT=y
+CONFIG_SYS_MEMTEST_START=0x00200000
+CONFIG_SYS_MEMTEST_END=0x00400000
+CONFIG_ENV_SIZE=0x2000
+CONFIG_ENV_OFFSET=0x100000
+CONFIG_SPL_TEXT_BASE=0xFFFD8000
+CONFIG_SPL_SERIAL_SUPPORT=y
+CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
+CONFIG_SPL=y
+CONFIG_DEFAULT_DEVICE_TREE="t2080rdb"
+CONFIG_MPC85xx=y
+CONFIG_TARGET_T2080RDB=y
+CONFIG_T2080RDB_REV_D=y
+CONFIG_SYS_CUSTOM_LDSCRIPT=y
+CONFIG_SYS_LDSCRIPT="arch/powerpc/cpu/mpc85xx/u-boot-nand.lds"
+CONFIG_FIT=y
+CONFIG_FIT_VERBOSE=y
+CONFIG_OF_BOARD_SETUP=y
+CONFIG_OF_STDOUT_VIA_ALIAS=y
+CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL"
+CONFIG_BOOTDELAY=10
+CONFIG_BOARD_EARLY_INIT_R=y
+# CONFIG_SPL_FRAMEWORK is not set
+CONFIG_SPL_NAND_BOOT=y
+CONFIG_SPL_FSL_PBL=y
+CONFIG_SPL_ENV_SUPPORT=y
+CONFIG_SPL_I2C_SUPPORT=y
+CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
+CONFIG_SPL_NAND_SUPPORT=y
+CONFIG_HUSH_PARSER=y
+CONFIG_CMD_IMLS=y
+CONFIG_CMD_MEMTEST=y
+CONFIG_SYS_ALT_MEMTEST=y
+CONFIG_CMD_DM=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_USB=y
+CONFIG_CMD_DHCP=y
+CONFIG_CMD_MII=y
+CONFIG_CMD_PING=y
+CONFIG_MP=y
+CONFIG_CMD_EXT2=y
+CONFIG_CMD_FAT=y
+CONFIG_CMD_MTDPARTS=y
+CONFIG_MTDIDS_DEFAULT="nor0=fe8000000.nor,nand0=fff800000.flash,spi0=spife110000.1"
+CONFIG_MTDPARTS_DEFAULT="mtdparts=fe8000000.nor:1m(uboot),5m(kernel),128k(dtb),96m(fs),-(user);fff800000.flash:1m(uboot),5m(kernel),128k(dtb),96m(fs),-(user);spife110000.1:1m(uboot),5m(kernel),128k(dtb),-(user)"
+# CONFIG_CMD_IRQ is not set
+CONFIG_OF_CONTROL=y
+CONFIG_ENV_OVERWRITE=y
+CONFIG_ENV_IS_IN_NAND=y
+CONFIG_DM=y
+CONFIG_FSL_CAAM=y
+CONFIG_DM_I2C=y
+CONFIG_FSL_ESDHC=y
+CONFIG_MTD=y
+CONFIG_MTD_NOR_FLASH=y
+CONFIG_FLASH_CFI_DRIVER=y
+CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
+CONFIG_FLASH_CFI_MTD=y
+CONFIG_SYS_FLASH_CFI=y
+CONFIG_MTD_RAW_NAND=y
+CONFIG_DM_SPI_FLASH=y
+CONFIG_SF_DEFAULT_MODE=0
+CONFIG_SF_DEFAULT_SPEED=10000000
+CONFIG_SPI_FLASH_STMICRO=y
+CONFIG_PHYLIB=y
+CONFIG_PHY_AQUANTIA=y
+CONFIG_PHY_CORTINA=y
+CONFIG_SYS_CORTINA_FW_IN_NAND=y
+CONFIG_PHY_REALTEK=y
+CONFIG_DM_ETH=y
+CONFIG_DM_MDIO=y
+CONFIG_E1000=y
+CONFIG_FMAN_ENET=y
+CONFIG_MII=y
+CONFIG_DM_PCI=y
+CONFIG_DM_PCI_COMPAT=y
+CONFIG_PCIE_FSL=y
+CONFIG_SYS_QE_FMAN_FW_IN_NAND=y
+CONFIG_DM_RTC=y
+CONFIG_RTC_DS1307=y
+CONFIG_SYS_NS16550=y
+CONFIG_SPI=y
+CONFIG_DM_SPI=y
+CONFIG_FSL_ESPI=y
+CONFIG_USB=y
+CONFIG_DM_USB=y
+CONFIG_USB_STORAGE=y
+CONFIG_ADDR_MAP=y
+CONFIG_SYS_NUM_ADDR_MAP=64
diff --git a/configs/T2080RDB_revD_SDCARD_defconfig b/configs/T2080RDB_revD_SDCARD_defconfig
new file mode 100644
index 000000000000..7b9013e5ecf6
--- /dev/null
+++ b/configs/T2080RDB_revD_SDCARD_defconfig
@@ -0,0 +1,90 @@
+CONFIG_PPC=y
+CONFIG_SYS_TEXT_BASE=0x00201000
+CONFIG_SPL_LIBCOMMON_SUPPORT=y
+CONFIG_SPL_LIBGENERIC_SUPPORT=y
+CONFIG_SYS_MEMTEST_START=0x00200000
+CONFIG_SYS_MEMTEST_END=0x00400000
+CONFIG_ENV_SIZE=0x2000
+CONFIG_ENV_OFFSET=0x100000
+CONFIG_SPL_TEXT_BASE=0xFFFD8000
+CONFIG_SPL_MMC_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
+CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
+CONFIG_SPL=y
+CONFIG_DEFAULT_DEVICE_TREE="t2080rdb"
+CONFIG_MPC85xx=y
+CONFIG_TARGET_T2080RDB=y
+CONFIG_T2080RDB_REV_D=y
+CONFIG_FIT=y
+CONFIG_FIT_VERBOSE=y
+CONFIG_OF_BOARD_SETUP=y
+CONFIG_OF_STDOUT_VIA_ALIAS=y
+CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,SDCARD"
+CONFIG_BOOTDELAY=10
+CONFIG_BOARD_EARLY_INIT_R=y
+# CONFIG_SPL_FRAMEWORK is not set
+CONFIG_SPL_MMC_BOOT=y
+CONFIG_SPL_FSL_PBL=y
+CONFIG_SPL_ENV_SUPPORT=y
+CONFIG_SPL_I2C_SUPPORT=y
+CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
+CONFIG_HUSH_PARSER=y
+CONFIG_CMD_IMLS=y
+CONFIG_CMD_MEMTEST=y
+CONFIG_SYS_ALT_MEMTEST=y
+CONFIG_CMD_DM=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_USB=y
+CONFIG_CMD_DHCP=y
+CONFIG_CMD_MII=y
+CONFIG_CMD_PING=y
+CONFIG_MP=y
+CONFIG_CMD_EXT2=y
+CONFIG_CMD_FAT=y
+CONFIG_CMD_MTDPARTS=y
+CONFIG_MTDIDS_DEFAULT="nor0=fe8000000.nor,nand0=fff800000.flash,spi0=spife110000.1"
+CONFIG_MTDPARTS_DEFAULT="mtdparts=fe8000000.nor:1m(uboot),5m(kernel),128k(dtb),96m(fs),-(user);fff800000.flash:1m(uboot),5m(kernel),128k(dtb),96m(fs),-(user);spife110000.1:1m(uboot),5m(kernel),128k(dtb),-(user)"
+# CONFIG_CMD_IRQ is not set
+CONFIG_OF_CONTROL=y
+CONFIG_ENV_OVERWRITE=y
+CONFIG_ENV_IS_IN_MMC=y
+CONFIG_DM=y
+CONFIG_FSL_CAAM=y
+CONFIG_DM_I2C=y
+CONFIG_FSL_ESDHC=y
+CONFIG_MTD=y
+CONFIG_MTD_NOR_FLASH=y
+CONFIG_FLASH_CFI_DRIVER=y
+CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
+CONFIG_FLASH_CFI_MTD=y
+CONFIG_SYS_FLASH_CFI=y
+CONFIG_DM_SPI_FLASH=y
+CONFIG_SF_DEFAULT_MODE=0
+CONFIG_SF_DEFAULT_SPEED=10000000
+CONFIG_SPI_FLASH_STMICRO=y
+CONFIG_PHYLIB=y
+CONFIG_PHY_AQUANTIA=y
+CONFIG_PHY_CORTINA=y
+CONFIG_SYS_CORTINA_FW_IN_MMC=y
+CONFIG_PHY_REALTEK=y
+CONFIG_DM_ETH=y
+CONFIG_DM_MDIO=y
+CONFIG_E1000=y
+CONFIG_FMAN_ENET=y
+CONFIG_MII=y
+CONFIG_DM_PCI=y
+CONFIG_DM_PCI_COMPAT=y
+CONFIG_PCIE_FSL=y
+CONFIG_SYS_QE_FMAN_FW_IN_MMC=y
+CONFIG_DM_RTC=y
+CONFIG_RTC_DS1307=y
+CONFIG_SYS_NS16550=y
+CONFIG_SPI=y
+CONFIG_DM_SPI=y
+CONFIG_FSL_ESPI=y
+CONFIG_USB=y
+CONFIG_DM_USB=y
+CONFIG_USB_STORAGE=y
+CONFIG_ADDR_MAP=y
+CONFIG_SYS_NUM_ADDR_MAP=64
diff --git a/configs/T2080RDB_revD_SPIFLASH_defconfig b/configs/T2080RDB_revD_SPIFLASH_defconfig
new file mode 100644
index 000000000000..af85fa6cdf78
--- /dev/null
+++ b/configs/T2080RDB_revD_SPIFLASH_defconfig
@@ -0,0 +1,92 @@
+CONFIG_PPC=y
+CONFIG_SYS_TEXT_BASE=0x00201000
+CONFIG_SPL_LIBCOMMON_SUPPORT=y
+CONFIG_SPL_LIBGENERIC_SUPPORT=y
+CONFIG_SYS_MEMTEST_START=0x00200000
+CONFIG_SYS_MEMTEST_END=0x00400000
+CONFIG_ENV_SIZE=0x2000
+CONFIG_ENV_OFFSET=0x100000
+CONFIG_ENV_SECT_SIZE=0x10000
+CONFIG_SPL_TEXT_BASE=0xFFFD8000
+CONFIG_SPL_SERIAL_SUPPORT=y
+CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
+CONFIG_SPL=y
+CONFIG_SPL_SPI_FLASH_SUPPORT=y
+CONFIG_SPL_SPI_SUPPORT=y
+CONFIG_DEFAULT_DEVICE_TREE="t2080rdb"
+CONFIG_MPC85xx=y
+CONFIG_TARGET_T2080RDB=y
+CONFIG_T2080RDB_REV_D=y
+CONFIG_FIT=y
+CONFIG_FIT_VERBOSE=y
+CONFIG_OF_BOARD_SETUP=y
+CONFIG_OF_STDOUT_VIA_ALIAS=y
+CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,SPIFLASH"
+CONFIG_BOOTDELAY=10
+CONFIG_BOARD_EARLY_INIT_R=y
+# CONFIG_SPL_FRAMEWORK is not set
+CONFIG_SPL_SPI_BOOT=y
+CONFIG_SPL_FSL_PBL=y
+CONFIG_SPL_ENV_SUPPORT=y
+CONFIG_SPL_I2C_SUPPORT=y
+CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
+CONFIG_HUSH_PARSER=y
+CONFIG_CMD_IMLS=y
+CONFIG_CMD_MEMTEST=y
+CONFIG_SYS_ALT_MEMTEST=y
+CONFIG_CMD_DM=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_USB=y
+CONFIG_CMD_DHCP=y
+CONFIG_CMD_MII=y
+CONFIG_CMD_PING=y
+CONFIG_MP=y
+CONFIG_CMD_EXT2=y
+CONFIG_CMD_FAT=y
+CONFIG_CMD_MTDPARTS=y
+CONFIG_MTDIDS_DEFAULT="nor0=fe8000000.nor,nand0=fff800000.flash,spi0=spife110000.1"
+CONFIG_MTDPARTS_DEFAULT="mtdparts=fe8000000.nor:1m(uboot),5m(kernel),128k(dtb),96m(fs),-(user);fff800000.flash:1m(uboot),5m(kernel),128k(dtb),96m(fs),-(user);spife110000.1:1m(uboot),5m(kernel),128k(dtb),-(user)"
+# CONFIG_CMD_IRQ is not set
+CONFIG_OF_CONTROL=y
+CONFIG_ENV_OVERWRITE=y
+CONFIG_ENV_IS_IN_SPI_FLASH=y
+CONFIG_DM=y
+CONFIG_FSL_CAAM=y
+CONFIG_DM_I2C=y
+CONFIG_FSL_ESDHC=y
+CONFIG_MTD=y
+CONFIG_MTD_NOR_FLASH=y
+CONFIG_FLASH_CFI_DRIVER=y
+CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
+CONFIG_FLASH_CFI_MTD=y
+CONFIG_SYS_FLASH_CFI=y
+CONFIG_DM_SPI_FLASH=y
+CONFIG_SF_DEFAULT_MODE=0
+CONFIG_SF_DEFAULT_SPEED=10000000
+CONFIG_SPI_FLASH_STMICRO=y
+CONFIG_PHYLIB=y
+CONFIG_PHY_AQUANTIA=y
+CONFIG_PHY_CORTINA=y
+CONFIG_SYS_CORTINA_FW_IN_SPIFLASH=y
+CONFIG_PHY_REALTEK=y
+CONFIG_DM_ETH=y
+CONFIG_DM_MDIO=y
+CONFIG_E1000=y
+CONFIG_FMAN_ENET=y
+CONFIG_MII=y
+CONFIG_DM_PCI=y
+CONFIG_DM_PCI_COMPAT=y
+CONFIG_PCIE_FSL=y
+CONFIG_SYS_QE_FMAN_FW_IN_SPIFLASH=y
+CONFIG_DM_RTC=y
+CONFIG_RTC_DS1307=y
+CONFIG_SYS_NS16550=y
+CONFIG_SPI=y
+CONFIG_DM_SPI=y
+CONFIG_FSL_ESPI=y
+CONFIG_USB=y
+CONFIG_DM_USB=y
+CONFIG_USB_STORAGE=y
+CONFIG_ADDR_MAP=y
+CONFIG_SYS_NUM_ADDR_MAP=64
diff --git a/configs/T2080RDB_revD_defconfig b/configs/T2080RDB_revD_defconfig
new file mode 100644
index 000000000000..79397ab30a8a
--- /dev/null
+++ b/configs/T2080RDB_revD_defconfig
@@ -0,0 +1,77 @@
+CONFIG_PPC=y
+CONFIG_SYS_TEXT_BASE=0xEFF40000
+CONFIG_SYS_MEMTEST_START=0x00200000
+CONFIG_SYS_MEMTEST_END=0x00400000
+CONFIG_ENV_SIZE=0x2000
+CONFIG_ENV_SECT_SIZE=0x20000
+CONFIG_DEFAULT_DEVICE_TREE="t2080rdb"
+CONFIG_MPC85xx=y
+CONFIG_TARGET_T2080RDB=y
+CONFIG_MPC85XX_HAVE_RESET_VECTOR=y
+CONFIG_T2080RDB_REV_D=y
+CONFIG_FIT=y
+CONFIG_FIT_VERBOSE=y
+CONFIG_OF_BOARD_SETUP=y
+CONFIG_OF_STDOUT_VIA_ALIAS=y
+CONFIG_BOOTDELAY=10
+CONFIG_BOARD_EARLY_INIT_R=y
+CONFIG_HUSH_PARSER=y
+CONFIG_CMD_IMLS=y
+CONFIG_CMD_MEMTEST=y
+CONFIG_SYS_ALT_MEMTEST=y
+CONFIG_CMD_DM=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_USB=y
+CONFIG_CMD_DHCP=y
+CONFIG_CMD_MII=y
+CONFIG_CMD_PING=y
+CONFIG_MP=y
+CONFIG_CMD_EXT2=y
+CONFIG_CMD_FAT=y
+CONFIG_CMD_MTDPARTS=y
+CONFIG_MTDIDS_DEFAULT="nor0=fe8000000.nor,nand0=fff800000.flash,spi0=spife110000.1"
+CONFIG_MTDPARTS_DEFAULT="mtdparts=fe8000000.nor:1m(uboot),5m(kernel),128k(dtb),96m(fs),-(user);fff800000.flash:1m(uboot),5m(kernel),128k(dtb),96m(fs),-(user);spife110000.1:1m(uboot),5m(kernel),128k(dtb),-(user)"
+# CONFIG_CMD_IRQ is not set
+CONFIG_OF_CONTROL=y
+CONFIG_ENV_OVERWRITE=y
+CONFIG_ENV_IS_IN_FLASH=y
+CONFIG_ENV_ADDR=0xEFF20000
+CONFIG_DM=y
+CONFIG_FSL_CAAM=y
+CONFIG_DM_I2C=y
+CONFIG_FSL_ESDHC=y
+CONFIG_MTD=y
+CONFIG_MTD_NOR_FLASH=y
+CONFIG_FLASH_CFI_DRIVER=y
+CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
+CONFIG_FLASH_CFI_MTD=y
+CONFIG_SYS_FLASH_CFI=y
+CONFIG_DM_SPI_FLASH=y
+CONFIG_SF_DEFAULT_MODE=0
+CONFIG_SF_DEFAULT_SPEED=10000000
+CONFIG_SPI_FLASH_STMICRO=y
+CONFIG_PHYLIB=y
+CONFIG_PHY_AQUANTIA=y
+CONFIG_PHY_CORTINA=y
+CONFIG_PHY_REALTEK=y
+CONFIG_DM_ETH=y
+CONFIG_DM_MDIO=y
+CONFIG_E1000=y
+CONFIG_FMAN_ENET=y
+CONFIG_MII=y
+CONFIG_DM_PCI=y
+CONFIG_DM_PCI_COMPAT=y
+CONFIG_PCIE_FSL=y
+CONFIG_SYS_QE_FMAN_FW_IN_NOR=y
+CONFIG_DM_RTC=y
+CONFIG_RTC_DS1307=y
+CONFIG_SYS_NS16550=y
+CONFIG_SPI=y
+CONFIG_DM_SPI=y
+CONFIG_FSL_ESPI=y
+CONFIG_USB=y
+CONFIG_DM_USB=y
+CONFIG_USB_STORAGE=y
+CONFIG_ADDR_MAP=y
+CONFIG_SYS_NUM_ADDR_MAP=64
--
2.17.1
More information about the U-Boot
mailing list