[PATCH 3/5] arm: dts: k3-am654-base-board: Add r5 specific u-boot dtsi
Lokesh Vutla
lokeshvutla at ti.com
Wed Jun 9 13:08:26 CEST 2021
So far all the u-boot specific properties for both r5 and a53 are
placed in k3-am654-base-board-u-boot.dtsi. But there are few a53
nodes that should be updated but doesn't belong to r5. So create a
separate r5 specific u-boot dtsi.
Signed-off-by: Lokesh Vutla <lokeshvutla at ti.com>
---
arch/arm/dts/k3-am654-base-board-u-boot.dtsi | 191 +----------------
.../dts/k3-am654-r5-base-board-u-boot.dtsi | 193 ++++++++++++++++++
arch/arm/dts/k3-am654-r5-base-board.dts | 2 -
3 files changed, 195 insertions(+), 191 deletions(-)
create mode 100644 arch/arm/dts/k3-am654-r5-base-board-u-boot.dtsi
diff --git a/arch/arm/dts/k3-am654-base-board-u-boot.dtsi b/arch/arm/dts/k3-am654-base-board-u-boot.dtsi
index b0602d1dad..77b7d3f452 100644
--- a/arch/arm/dts/k3-am654-base-board-u-boot.dtsi
+++ b/arch/arm/dts/k3-am654-base-board-u-boot.dtsi
@@ -1,193 +1,6 @@
// SPDX-License-Identifier: GPL-2.0
/*
- * Copyright (C) 2018 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2018-2021 Texas Instruments Incorporated - http://www.ti.com/
*/
-#include <dt-bindings/pinctrl/k3.h>
-#include <dt-bindings/net/ti-dp83867.h>
-
-/ {
- chosen {
- stdout-path = "serial2:115200n8";
- };
-
- aliases {
- serial2 = &main_uart0;
- ethernet0 = &cpsw_port1;
- usb0 = &usb0;
- usb1 = &usb1;
- spi0 = &ospi0;
- spi1 = &ospi1;
- };
-};
-
-&cbass_main{
- u-boot,dm-spl;
- main-navss {
- u-boot,dm-spl;
- };
-};
-
-&cbass_mcu {
- u-boot,dm-spl;
-
- mcu-navss {
- u-boot,dm-spl;
-
- ringacc at 2b800000 {
- u-boot,dm-spl;
- ti,dma-ring-reset-quirk;
- };
-
- dma-controller at 285c0000 {
- u-boot,dm-spl;
- };
- };
-};
-
-&cbass_wakeup {
- u-boot,dm-spl;
-
- chipid at 43000014 {
- u-boot,dm-spl;
- };
-};
-
-&secure_proxy_main {
- u-boot,dm-spl;
-};
-
-&dmsc {
- u-boot,dm-spl;
- k3_sysreset: sysreset-controller {
- compatible = "ti,sci-sysreset";
- u-boot,dm-spl;
- };
-};
-
-&k3_pds {
- u-boot,dm-spl;
-};
-
-&k3_clks {
- u-boot,dm-spl;
-};
-
-&k3_reset {
- u-boot,dm-spl;
-};
-
-&wkup_pmx0 {
- u-boot,dm-spl;
-
- wkup_i2c0_pins_default {
- u-boot,dm-spl;
- };
-};
-
-&main_pmx0 {
- u-boot,dm-spl;
- usb0_pins_default: usb0_pins_default {
- pinctrl-single,pins = <
- AM65X_IOPAD(0x02bc, PIN_OUTPUT, 0) /* (AD9) USB0_DRVVBUS */
- >;
- u-boot,dm-spl;
- };
-};
-
-&main_uart0_pins_default {
- u-boot,dm-spl;
-};
-
-&main_pmx1 {
- u-boot,dm-spl;
-};
-
-&wkup_pmx0 {
- mcu-fss0-ospi0-pins-default {
- u-boot,dm-spl;
- };
-};
-
-&main_uart0 {
- u-boot,dm-spl;
-};
-
-&main_mmc0_pins_default {
- u-boot,dm-spl;
-};
-
-&main_mmc1_pins_default {
- u-boot,dm-spl;
-};
-
-&sdhci0 {
- u-boot,dm-spl;
-};
-
-&sdhci1 {
- u-boot,dm-spl;
-};
-
-&davinci_mdio {
- phy0: ethernet-phy at 0 {
- reg = <0>;
- /* TODO: phy reset: TCA9555RTWR(i2c:0x21)[p04].GPIO_MCU_RGMII_RSTN */
- ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
- ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
- };
-};
-
-&mcu_cpsw {
- reg = <0x0 0x46000000 0x0 0x200000>,
- <0x0 0x40f00200 0x0 0x2>;
- reg-names = "cpsw_nuss", "mac_efuse";
- /delete-property/ ranges;
-
- cpsw-phy-sel at 40f04040 {
- compatible = "ti,am654-cpsw-phy-sel";
- reg= <0x0 0x40f04040 0x0 0x4>;
- reg-names = "gmii-sel";
- };
-};
-
-&wkup_i2c0 {
- u-boot,dm-spl;
-};
-
-&usb1 {
- dr_mode = "peripheral";
-};
-
-&fss {
- u-boot,dm-spl;
-};
-
-&ospi0 {
- u-boot,dm-spl;
-
- flash at 0{
- u-boot,dm-spl;
- };
-};
-
-&dwc3_0 {
- status = "okay";
- u-boot,dm-spl;
-};
-
-&usb0_phy {
- status = "okay";
- u-boot,dm-spl;
-};
-
-&usb0 {
- pinctrl-names = "default";
- pinctrl-0 = <&usb0_pins_default>;
- dr_mode = "host";
- u-boot,dm-spl;
-};
-
-&scm_conf {
- u-boot,dm-spl;
-};
+#include "k3-am654-r5-base-board-u-boot.dtsi"
diff --git a/arch/arm/dts/k3-am654-r5-base-board-u-boot.dtsi b/arch/arm/dts/k3-am654-r5-base-board-u-boot.dtsi
new file mode 100644
index 0000000000..932a65b906
--- /dev/null
+++ b/arch/arm/dts/k3-am654-r5-base-board-u-boot.dtsi
@@ -0,0 +1,193 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2018-2021 Texas Instruments Incorporated - http://www.ti.com/
+ */
+
+#include <dt-bindings/pinctrl/k3.h>
+#include <dt-bindings/net/ti-dp83867.h>
+
+/ {
+ chosen {
+ stdout-path = "serial2:115200n8";
+ };
+
+ aliases {
+ serial2 = &main_uart0;
+ ethernet0 = &cpsw_port1;
+ usb0 = &usb0;
+ usb1 = &usb1;
+ spi0 = &ospi0;
+ spi1 = &ospi1;
+ };
+};
+
+&cbass_main{
+ u-boot,dm-spl;
+ main-navss {
+ u-boot,dm-spl;
+ };
+};
+
+&cbass_mcu {
+ u-boot,dm-spl;
+
+ mcu-navss {
+ u-boot,dm-spl;
+
+ ringacc at 2b800000 {
+ u-boot,dm-spl;
+ ti,dma-ring-reset-quirk;
+ };
+
+ dma-controller at 285c0000 {
+ u-boot,dm-spl;
+ };
+ };
+};
+
+&cbass_wakeup {
+ u-boot,dm-spl;
+
+ chipid at 43000014 {
+ u-boot,dm-spl;
+ };
+};
+
+&secure_proxy_main {
+ u-boot,dm-spl;
+};
+
+&dmsc {
+ u-boot,dm-spl;
+ k3_sysreset: sysreset-controller {
+ compatible = "ti,sci-sysreset";
+ u-boot,dm-spl;
+ };
+};
+
+&k3_pds {
+ u-boot,dm-spl;
+};
+
+&k3_clks {
+ u-boot,dm-spl;
+};
+
+&k3_reset {
+ u-boot,dm-spl;
+};
+
+&wkup_pmx0 {
+ u-boot,dm-spl;
+
+ wkup_i2c0_pins_default {
+ u-boot,dm-spl;
+ };
+};
+
+&main_pmx0 {
+ u-boot,dm-spl;
+ usb0_pins_default: usb0_pins_default {
+ pinctrl-single,pins = <
+ AM65X_IOPAD(0x02bc, PIN_OUTPUT, 0) /* (AD9) USB0_DRVVBUS */
+ >;
+ u-boot,dm-spl;
+ };
+};
+
+&main_uart0_pins_default {
+ u-boot,dm-spl;
+};
+
+&main_pmx1 {
+ u-boot,dm-spl;
+};
+
+&wkup_pmx0 {
+ mcu-fss0-ospi0-pins-default {
+ u-boot,dm-spl;
+ };
+};
+
+&main_uart0 {
+ u-boot,dm-spl;
+};
+
+&main_mmc0_pins_default {
+ u-boot,dm-spl;
+};
+
+&main_mmc1_pins_default {
+ u-boot,dm-spl;
+};
+
+&sdhci0 {
+ u-boot,dm-spl;
+};
+
+&sdhci1 {
+ u-boot,dm-spl;
+};
+
+&davinci_mdio {
+ phy0: ethernet-phy at 0 {
+ reg = <0>;
+ /* TODO: phy reset: TCA9555RTWR(i2c:0x21)[p04].GPIO_MCU_RGMII_RSTN */
+ ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+ ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+ };
+};
+
+&mcu_cpsw {
+ reg = <0x0 0x46000000 0x0 0x200000>,
+ <0x0 0x40f00200 0x0 0x2>;
+ reg-names = "cpsw_nuss", "mac_efuse";
+ /delete-property/ ranges;
+
+ cpsw-phy-sel at 40f04040 {
+ compatible = "ti,am654-cpsw-phy-sel";
+ reg= <0x0 0x40f04040 0x0 0x4>;
+ reg-names = "gmii-sel";
+ };
+};
+
+&wkup_i2c0 {
+ u-boot,dm-spl;
+};
+
+&usb1 {
+ dr_mode = "peripheral";
+};
+
+&fss {
+ u-boot,dm-spl;
+};
+
+&ospi0 {
+ u-boot,dm-spl;
+
+ flash at 0{
+ u-boot,dm-spl;
+ };
+};
+
+&dwc3_0 {
+ status = "okay";
+ u-boot,dm-spl;
+};
+
+&usb0_phy {
+ status = "okay";
+ u-boot,dm-spl;
+};
+
+&usb0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb0_pins_default>;
+ dr_mode = "host";
+ u-boot,dm-spl;
+};
+
+&scm_conf {
+ u-boot,dm-spl;
+};
diff --git a/arch/arm/dts/k3-am654-r5-base-board.dts b/arch/arm/dts/k3-am654-r5-base-board.dts
index 087a3bb3d0..24881c86f2 100644
--- a/arch/arm/dts/k3-am654-r5-base-board.dts
+++ b/arch/arm/dts/k3-am654-r5-base-board.dts
@@ -330,5 +330,3 @@
&scm_conf {
u-boot,dm-spl;
};
-
-#include "k3-am654-base-board-u-boot.dtsi"
--
2.31.1
More information about the U-Boot
mailing list