[PATCH v2 0/5] Add SIMATIC IOT2050 board support

Fri Jun 11 16:53:41 CEST 2021

On Fri, Jun 11, 2021 at 08:00:17PM +0530, Lokesh Vutla wrote:
> 
> 
> On 02/06/21 3:07 pm, Jan Kiszka wrote:
> > This is the baseline support for the SIMATIC IOT2050 devices.
> > 
> > Changes in v2:
> >  - rebased
> >  - sync with upstream-accepted DT
> >  - add boot switch
> >  - include watchdog support
> > 
> > Allows to boot mainline 5.10 kernels, but not the original BSP-derived
> > kernel we currently ship as reference. This is due to the TI sysfw ABI
> > breakages between 2.x and 3.x. We will soon provide a transitional
> > kernel that allows booting both firmware ABIs - as long as full upstream
> > kernel support is work in progress.
> > 
> > Note that this baseline support lacks Ethernet drivers. We are working
> > closely with TI to ensure that the to-be-upstreamed icssg-prueth driver
> > will work both with new SR2.0 AM65x silicon as well as with SR1.0 which
> > is used in the currently shipped IOT2050 devices.
> > 
> > A staging tree for complete IOT2050 support can be found at [1]. Full
> > image integration is available via [2].
> > 
> > Regarding patch 4: There has been some doubts on the proposed approach,
> > but there has been also no suggestion provided for a similarly
> > lightweight and secure embedding method. Therefore, I'm proposing our
> > solution once again.
> 
> There are multiple checkpatch issues with this series. Can you fix them where
> ever possible?
> 
> ➜  u-boot-ti git:(for-next) ./scripts/checkpatch.pl --strict siemens/*.patch
> --------------------------------------------------------
> siemens/0001-arm-dts-Add-IOT2050-device-tree-files.patch
> --------------------------------------------------------
> WARNING: added, moved or deleted file(s), does MAINTAINERS need updating?
> #50:
> new file mode 100644
> 
> WARNING: line length of 102 exceeds 100 columns
> #103: FILE: arch/arm/dts/k3-am65-iot2050-boot-image.dtsi:49:
> +						filename = "arch/arm/dts/k3-am6528-iot2050-basic.dtb";
> 
> WARNING: line length of 105 exceeds 100 columns
> #113: FILE: arch/arm/dts/k3-am65-iot2050-boot-image.dtsi:59:
> +						filename = "arch/arm/dts/k3-am6548-iot2050-advanced.dtb";
> 
> total: 0 errors, 3 warnings, 0 checks, 1025 lines checked
> 
> NOTE: For some of the reported defects, checkpatch may be able to
>       mechanically convert to the typical style using --fix or --fix-inplace.
> 
> siemens/0001-arm-dts-Add-IOT2050-device-tree-files.patch has style problems,
> please review.
> -----------------------------------------------------------------------
> siemens/0002-board-siemens-Add-support-for-SIMATIC-IOT2050-device.patch
> -----------------------------------------------------------------------
> WARNING: added, moved or deleted file(s), does MAINTAINERS need updating?
> #53:
> new file mode 100644
> 
> WARNING: Use 'if (IS_ENABLED(CONFIG...))' instead of '#if or #ifdef' where possible
> #282: FILE: board/siemens/iot2050/board.c:86:
> +#ifdef CONFIG_NET
> 
> WARNING: Use 'if (IS_ENABLED(CONFIG...))' instead of '#if or #ifdef' where possible
> #338: FILE: board/siemens/iot2050/board.c:142:
> +#ifdef CONFIG_SPL_LOAD_FIT
> 
> WARNING: Use 'if (IS_ENABLED(CONFIG...))' instead of '#if or #ifdef' where possible
> #361: FILE: board/siemens/iot2050/board.c:165:
> +#ifdef CONFIG_IOT2050_BOOT_SWITCH
> 
> WARNING: Use 'if (IS_ENABLED(CONFIG...))' instead of '#if or #ifdef' where possible
> #404: FILE: board/siemens/iot2050/board.c:208:
> +#ifdef CONFIG_IOT2050_BOOT_SWITCH
> 
> WARNING: Use 'if (IS_ENABLED(CONFIG...))' instead of '#if or #ifdef' where possible
> #413: FILE: board/siemens/iot2050/board.c:217:
> +#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP)
> 
> WARNING: Use 'if (IS_ENABLED(CONFIG...))' instead of '#if or #ifdef' where possible
> #458: FILE: board/siemens/iot2050/board.c:262:
> +#if CONFIG_IS_ENABLED(LED)
> 
> CHECK: Macro argument reuse 'func' - possible side-effects?
> #683: FILE: include/configs/iot2050.h:43:
> +#define BOOT_TARGET_DEVICES(func) \
> +	func(MMC, mmc, 1) \
> +	func(MMC, mmc, 0) \
> +	func(USB, usb, 0) \
> +	func(USB, usb, 1) \
> +	func(USB, usb, 2)
> 
> total: 0 errors, 7 warnings, 1 checks, 606 lines checked
> 
> NOTE: For some of the reported defects, checkpatch may be able to
>       mechanically convert to the typical style using --fix or --fix-inplace.
> 
> siemens/0002-board-siemens-Add-support-for-SIMATIC-IOT2050-device.patch has
> style problems, please review.
> ------------------------------------------------------------------
> siemens/0003-arm64-dts-ti-k3-am65-mcu-Add-RTI-watchdog-entry.patch
> ------------------------------------------------------------------
> total: 0 errors, 0 warnings, 0 checks, 13 lines checked
> 
> siemens/0003-arm64-dts-ti-k3-am65-mcu-Add-RTI-watchdog-entry.patch has no
> obvious style problems and is ready for submission.
> --------------------------------------------------------------------
> siemens/0004-watchdog-rti_wdt-Add-support-for-loading-firmware.patch
> --------------------------------------------------------------------
> WARNING: externs should be avoided in .c files
> #95: FILE: drivers/watchdog/rti_wdt.c:47:
> +extern const u32 rti_wdt_fw[];
> 
> WARNING: externs should be avoided in .c files
> #96: FILE: drivers/watchdog/rti_wdt.c:48:
> +extern const int rti_wdt_fw_size;
> 
> WARNING: Use 'if (IS_ENABLED(CONFIG...))' instead of '#if or #ifdef' where possible
> #100: FILE: drivers/watchdog/rti_wdt.c:52:
> +#ifdef CONFIG_WDT_K3_RTI_LOAD_FW
> 
> WARNING: Use 'if (IS_ENABLED(CONFIG...))' instead of '#if or #ifdef' where possible
> #113: FILE: drivers/watchdog/rti_wdt.c:64:
> +#ifdef CONFIG_WDT_K3_RTI_LOAD_FW
> 
> WARNING: labels should not be indented
> #116: FILE: drivers/watchdog/rti_wdt.c:67:
> +	    dt_error:
> 
> WARNING: labels should not be indented
> #137: FILE: drivers/watchdog/rti_wdt.c:88:
> +	    fw_error:
> 
> WARNING: added, moved or deleted file(s), does MAINTAINERS need updating?
> #163:
> new file mode 100644
> 
> WARNING: Improper SPDX comment style for 'drivers/watchdog/rti_wdt_fw.S', please
> use '/*' instead
> #168: FILE: drivers/watchdog/rti_wdt_fw.S:1:
> +// SPDX-License-Identifier: GPL-2.0+
> 
> WARNING: Missing or malformed SPDX-License-Identifier tag in line 1
> #168: FILE: drivers/watchdog/rti_wdt_fw.S:1:
> +// SPDX-License-Identifier: GPL-2.0+
> 
> total: 0 errors, 9 warnings, 0 checks, 139 lines checked
> 
> NOTE: For some of the reported defects, checkpatch may be able to
>       mechanically convert to the typical style using --fix or --fix-inplace.
> 
> siemens/0004-watchdog-rti_wdt-Add-support-for-loading-firmware.patch has style
> problems, please review.
> -----------------------------------------------------------------------
> siemens/0005-configs-iot2050-Enable-watchdog-support-but-do-not-a.patch
> -----------------------------------------------------------------------

Since I just pointed out some checkpatch problems to Lokesh in his last
PR, I should note that out of all of this list, I only really care about
the SPDX one.  There are plenty of cases where:
#ifdef CONFIG_FOO
...
#endif

is more readable / clear than:
	if (IS_ENABLED(CONFIG_FOO)) {
		...
	}

Warnings are warning and can be ignored for good reason, errors cannot.

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 659 bytes
Desc: not available
URL: <https://lists.denx.de/pipermail/u-boot/attachments/20210611/c6b994f0/attachment.sig>