[PATCH 01/10] tools: k3_fit_atf: Add support for providing ATF load address using a Kconfig symbol

[Aswath Govindraju]

Hi Lokesh,

On 03/06/21 10:54 am, Lokesh Vutla wrote:
> 
> 
> On 01/06/21 8:43 pm, Aswath Govindraju wrote:
>> Add support for providing ATF load address with a Kconfig symbol.
>>
>> Signed-off-by: Aswath Govindraju <a-govindraju at ti.com>
>> ---
>>  arch/arm/mach-k3/Kconfig   | 7 +++++++
>>  arch/arm/mach-k3/config.mk | 1 +
>>  tools/k3_fit_atf.sh        | 9 ++++++---
>>  3 files changed, 14 insertions(+), 3 deletions(-)
>>
>> diff --git a/arch/arm/mach-k3/Kconfig b/arch/arm/mach-k3/Kconfig
>> index bfbce44bfa59..2c46d7a3a798 100644
>> --- a/arch/arm/mach-k3/Kconfig
>> +++ b/arch/arm/mach-k3/Kconfig
>> @@ -147,6 +147,13 @@ config SYS_K3_SPL_ATF
>>  	  Enabling this will try to start Cortex-A (typically with ATF)
>>  	  after SPL from R5.
>>  
>> +config K3_ATF_LOAD_ADDR
>> +	hex "Load address of ATF image"
>> +	default 0x7000000
> 
> 	shouldn't this be 0x70000000 ?
> 

Sorry , it should be 0x70000000. Will correct this in respin.

Thanks,
Aswath

> Thanks and regards,
> Lokesh
>