[PATCH] mips: mt7688: gardena-smart-gateway: Adjust to production values

Reto Schneider code at reto-schneider.ch
Thu Jun 17 18:09:34 CEST 2021


From: Reto Schneider <reto.schneider at husqvarnagroup.com>

This commit updates the default config with the values that will
be used soon on the MediaTek MT7688 based GARDENA smart gateway.

CONFIG_SPL_SYS_MALLOC_F_LEN had to be increased due to the more
demanding new configuration.

Signed-off-by: Reto Schneider <reto.schneider at husqvarnagroup.com>
---

 configs/gardena-smart-gateway-mt7688_defconfig | 13 +++++++++++--
 1 file changed, 11 insertions(+), 2 deletions(-)

diff --git a/configs/gardena-smart-gateway-mt7688_defconfig b/configs/gardena-smart-gateway-mt7688_defconfig
index c03123f6e4..46b9849b1c 100644
--- a/configs/gardena-smart-gateway-mt7688_defconfig
+++ b/configs/gardena-smart-gateway-mt7688_defconfig
@@ -2,18 +2,19 @@ CONFIG_MIPS=y
 CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
 CONFIG_NR_DRAM_BANKS=1
+CONFIG_SYS_MEMTEST_START=0x0
 CONFIG_ENV_SIZE=0x10000
 CONFIG_ENV_OFFSET=0xA0000
 CONFIG_ENV_SECT_SIZE=0x10000
+CONFIG_DEFAULT_DEVICE_TREE="gardena-smart-gateway-mt7688"
 CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_SYS_BOOTCOUNT_ADDR=0xb000006c
-CONFIG_SPL_SYS_MALLOC_F_LEN=0x40000
+CONFIG_SPL_SYS_MALLOC_F_LEN=0x80000
 CONFIG_SPL=y
 CONFIG_SYS_BOOTCOUNT_SINGLEWORD=y
 CONFIG_ENV_OFFSET_REDUND=0xB0000
 CONFIG_ARCH_MTMIPS=y
 CONFIG_SOC_MT7628=y
-CONFIG_DEFAULT_DEVICE_TREE="gardena-smart-gateway-mt7688"
 CONFIG_RESTORE_EXCEPTION_VECTOR_BASE=y
 # CONFIG_MIPS_BOOT_ENV_LEGACY is not set
 CONFIG_MIPS_BOOT_FDT=y
@@ -22,6 +23,8 @@ CONFIG_FIT=y
 CONFIG_FIT_SIGNATURE=y
 CONFIG_LEGACY_IMAGE_FORMAT=y
 CONFIG_OF_STDOUT_VIA_ALIAS=y
+CONFIG_AUTOBOOT_KEYED=y
+CONFIG_AUTOBOOT_STOP_STR="x"
 CONFIG_USE_BOOTCOMMAND=y
 CONFIG_BOOTCOMMAND="cp.b 83000000 84000000 10000 && dhcp uEnv.txt && env import -t ${fileaddr} ${filesize} && run do_u_boot_init; reset"
 CONFIG_USE_PREBOOT=y
@@ -34,6 +37,8 @@ CONFIG_CMD_LICENSE=y
 # CONFIG_CMD_ELF is not set
 # CONFIG_CMD_XIMG is not set
 CONFIG_CMD_MEMINFO=y
+CONFIG_CMD_MEMTEST=y
+CONFIG_SYS_ALT_MEMTEST=y
 # CONFIG_CMD_FLASH is not set
 CONFIG_CMD_GPIO=y
 # CONFIG_CMD_LOADS is not set
@@ -45,14 +50,17 @@ CONFIG_CMD_MII=y
 CONFIG_CMD_PING=y
 CONFIG_CMD_BOOTCOUNT=y
 CONFIG_CMD_TIME=y
+CONFIG_CMD_GETTIME=y
 CONFIG_CMD_UUID=y
 CONFIG_CMD_MTDPARTS=y
+CONFIG_CMD_MTDPARTS_SHOW_NET_SIZES=y
 CONFIG_MTDIDS_DEFAULT="spi-nand0=spi0.1,nor0=spi0.0"
 CONFIG_MTDPARTS_DEFAULT="spi0.0:640k(uboot),64k(uboot_env0),64k(uboot_env1),64k(factory),-(unused);spi0.1:-(nand)"
 CONFIG_CMD_UBI=y
 CONFIG_ENV_IS_IN_SPI_FLASH=y
 CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
 CONFIG_VERSION_VARIABLE=y
 CONFIG_NET_RANDOM_ETHADDR=y
 CONFIG_SPL_DM=y
@@ -73,6 +81,7 @@ CONFIG_SPI_FLASH_WINBOND=y
 CONFIG_SPI_FLASH_XMC=y
 CONFIG_SPI_FLASH_MTD=y
 CONFIG_MTD_UBI_BEB_LIMIT=22
+CONFIG_MTD_UBI_FASTMAP=y
 CONFIG_MT7628_ETH=y
 CONFIG_PHY=y
 CONFIG_SPECIFY_CONSOLE_INDEX=y
-- 
2.30.2



More information about the U-Boot mailing list