[PATCH] mips: mt7688: gardena-smart-gateway: Adjust to production values

[Stefan Roese]

On 17.06.21 18:09, Reto Schneider wrote:
> From: Reto Schneider <reto.schneider at husqvarnagroup.com>
> 
> This commit updates the default config with the values that will
> be used soon on the MediaTek MT7688 based GARDENA smart gateway.
> 
> CONFIG_SPL_SYS_MALLOC_F_LEN had to be increased due to the more
> demanding new configuration.
> 
> Signed-off-by: Reto Schneider <reto.schneider at husqvarnagroup.com>

Reviewed-by: Stefan Roese <sr at denx.de>

Thanks,
Stefan

> ---
> 
>   configs/gardena-smart-gateway-mt7688_defconfig | 13 +++++++++++--
>   1 file changed, 11 insertions(+), 2 deletions(-)
> 
> diff --git a/configs/gardena-smart-gateway-mt7688_defconfig b/configs/gardena-smart-gateway-mt7688_defconfig
> index c03123f6e4..46b9849b1c 100644
> --- a/configs/gardena-smart-gateway-mt7688_defconfig
> +++ b/configs/gardena-smart-gateway-mt7688_defconfig
> @@ -2,18 +2,19 @@ CONFIG_MIPS=y
>   CONFIG_SPL_LIBCOMMON_SUPPORT=y
>   CONFIG_SPL_LIBGENERIC_SUPPORT=y
>   CONFIG_NR_DRAM_BANKS=1
> +CONFIG_SYS_MEMTEST_START=0x0
>   CONFIG_ENV_SIZE=0x10000
>   CONFIG_ENV_OFFSET=0xA0000
>   CONFIG_ENV_SECT_SIZE=0x10000
> +CONFIG_DEFAULT_DEVICE_TREE="gardena-smart-gateway-mt7688"
>   CONFIG_SPL_SERIAL_SUPPORT=y
>   CONFIG_SYS_BOOTCOUNT_ADDR=0xb000006c
> -CONFIG_SPL_SYS_MALLOC_F_LEN=0x40000
> +CONFIG_SPL_SYS_MALLOC_F_LEN=0x80000
>   CONFIG_SPL=y
>   CONFIG_SYS_BOOTCOUNT_SINGLEWORD=y
>   CONFIG_ENV_OFFSET_REDUND=0xB0000
>   CONFIG_ARCH_MTMIPS=y
>   CONFIG_SOC_MT7628=y
> -CONFIG_DEFAULT_DEVICE_TREE="gardena-smart-gateway-mt7688"
>   CONFIG_RESTORE_EXCEPTION_VECTOR_BASE=y
>   # CONFIG_MIPS_BOOT_ENV_LEGACY is not set
>   CONFIG_MIPS_BOOT_FDT=y
> @@ -22,6 +23,8 @@ CONFIG_FIT=y
>   CONFIG_FIT_SIGNATURE=y
>   CONFIG_LEGACY_IMAGE_FORMAT=y
>   CONFIG_OF_STDOUT_VIA_ALIAS=y
> +CONFIG_AUTOBOOT_KEYED=y
> +CONFIG_AUTOBOOT_STOP_STR="x"
>   CONFIG_USE_BOOTCOMMAND=y
>   CONFIG_BOOTCOMMAND="cp.b 83000000 84000000 10000 && dhcp uEnv.txt && env import -t ${fileaddr} ${filesize} && run do_u_boot_init; reset"
>   CONFIG_USE_PREBOOT=y
> @@ -34,6 +37,8 @@ CONFIG_CMD_LICENSE=y
>   # CONFIG_CMD_ELF is not set
>   # CONFIG_CMD_XIMG is not set
>   CONFIG_CMD_MEMINFO=y
> +CONFIG_CMD_MEMTEST=y
> +CONFIG_SYS_ALT_MEMTEST=y
>   # CONFIG_CMD_FLASH is not set
>   CONFIG_CMD_GPIO=y
>   # CONFIG_CMD_LOADS is not set
> @@ -45,14 +50,17 @@ CONFIG_CMD_MII=y
>   CONFIG_CMD_PING=y
>   CONFIG_CMD_BOOTCOUNT=y
>   CONFIG_CMD_TIME=y
> +CONFIG_CMD_GETTIME=y
>   CONFIG_CMD_UUID=y
>   CONFIG_CMD_MTDPARTS=y
> +CONFIG_CMD_MTDPARTS_SHOW_NET_SIZES=y
>   CONFIG_MTDIDS_DEFAULT="spi-nand0=spi0.1,nor0=spi0.0"
>   CONFIG_MTDPARTS_DEFAULT="spi0.0:640k(uboot),64k(uboot_env0),64k(uboot_env1),64k(factory),-(unused);spi0.1:-(nand)"
>   CONFIG_CMD_UBI=y
>   CONFIG_ENV_IS_IN_SPI_FLASH=y
>   CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
>   CONFIG_SYS_RELOC_GD_ENV_ADDR=y
> +CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
>   CONFIG_VERSION_VARIABLE=y
>   CONFIG_NET_RANDOM_ETHADDR=y
>   CONFIG_SPL_DM=y
> @@ -73,6 +81,7 @@ CONFIG_SPI_FLASH_WINBOND=y
>   CONFIG_SPI_FLASH_XMC=y
>   CONFIG_SPI_FLASH_MTD=y
>   CONFIG_MTD_UBI_BEB_LIMIT=22
> +CONFIG_MTD_UBI_FASTMAP=y
>   CONFIG_MT7628_ETH=y
>   CONFIG_PHY=y
>   CONFIG_SPECIFY_CONSOLE_INDEX=y
> 


Viele Grüße,
Stefan

-- 
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-51 Fax: (+49)-8142-66989-80 Email: sr at denx.de