[PATCH] net: dwc_eth_qos: Revert some changes of commit 3a97da12ee7b
Ramon Fried
rfried.dev at gmail.com
Sat Jun 12 20:37:08 CEST 2021
On Sun May 30, 2021 at 4:34 PM IDT, Daniil Stas wrote:
> Revert some changes of commit 3a97da12ee7b ("net: dwc_eth_qos: add dwc
> eqos for imx support") that were probably added by mistake.
>
> One of these changes can lead to received data corruption (enabling
> FUP and FEP bits). Another causes invalid register rxq_ctrl0 settings
> for some platforms. And another makes some writes at unknown memory
> location.
>
> Fixes: 3a97da12ee7b ("net: dwc_eth_qos: add dwc eqos for imx support")
> Signed-off-by: Daniil Stas <daniil.stas at posteo.net>
> Cc: Ye Li <ye.li at nxp.com>
> Cc: Fugang Duan <fugang.duan at nxp.com>
> Cc: Peng Fan <peng.fan at nxp.com>
> Cc: Ramon Fried <rfried.dev at gmail.com>
> Cc: Joe Hershberger <joe.hershberger at ni.com>
> Cc: Patrice Chotard <patrice.chotard at foss.st.com>
> Cc: Patrick Delaunay <patrick.delaunay at foss.st.com>
> ---
> drivers/net/dwc_eth_qos.c | 13 +------------
> 1 file changed, 1 insertion(+), 12 deletions(-)
>
> diff --git a/drivers/net/dwc_eth_qos.c b/drivers/net/dwc_eth_qos.c
> index 2f088c758f..b012bed517 100644
> --- a/drivers/net/dwc_eth_qos.c
> +++ b/drivers/net/dwc_eth_qos.c
> @@ -172,8 +172,6 @@ struct eqos_mtl_regs {
> #define EQOS_MTL_RXQ0_OPERATION_MODE_RFA_MASK 0x3f
> #define EQOS_MTL_RXQ0_OPERATION_MODE_EHFC BIT(7)
> #define EQOS_MTL_RXQ0_OPERATION_MODE_RSF BIT(5)
> -#define EQOS_MTL_RXQ0_OPERATION_MODE_FEP BIT(4)
> -#define EQOS_MTL_RXQ0_OPERATION_MODE_FUP BIT(3)
>
> #define EQOS_MTL_RXQ0_DEBUG_PRXQ_SHIFT 16
> #define EQOS_MTL_RXQ0_DEBUG_PRXQ_MASK 0x7fff
> @@ -1222,7 +1220,6 @@ static int eqos_start(struct udevice *dev)
> }
>
> /* Configure MTL */
> - writel(0x60, &eqos->mtl_regs->txq0_quantum_weight - 0x100);
>
> /* Enable Store and Forward mode for TX */
> /* Program Tx operating mode */
> @@ -1236,9 +1233,7 @@ static int eqos_start(struct udevice *dev)
>
> /* Enable Store and Forward mode for RX, since no jumbo frame */
> setbits_le32(&eqos->mtl_regs->rxq0_operation_mode,
> - EQOS_MTL_RXQ0_OPERATION_MODE_RSF |
> - EQOS_MTL_RXQ0_OPERATION_MODE_FEP |
> - EQOS_MTL_RXQ0_OPERATION_MODE_FUP);
> + EQOS_MTL_RXQ0_OPERATION_MODE_RSF);
>
> /* Transmit/Receive queue fifo size; use all RAM for 1 queue */
> val = readl(&eqos->mac_regs->hw_feature1);
> @@ -1314,12 +1309,6 @@ static int eqos_start(struct udevice *dev)
> eqos->config->config_mac <<
> EQOS_MAC_RXQ_CTRL0_RXQ0EN_SHIFT);
>
> - clrsetbits_le32(&eqos->mac_regs->rxq_ctrl0,
> - EQOS_MAC_RXQ_CTRL0_RXQ0EN_MASK <<
> - EQOS_MAC_RXQ_CTRL0_RXQ0EN_SHIFT,
> - 0x2 <<
> - EQOS_MAC_RXQ_CTRL0_RXQ0EN_SHIFT);
> -
> /* Multicast and Broadcast Queue Enable */
> setbits_le32(&eqos->mac_regs->unused_0a4,
> 0x00100000);
> --
> 2.31.1
pplied to u-boot-net/master, thanks!
Best regards,
Ramon Fried
More information about the U-Boot
mailing list