[PATCH v2 3/5] arm: dts: stm32mp157c-odyssey-som: set the SDMMC2 VQMMC supply

[Patrice CHOTARD]

On 6/2/21 7:09 PM, Grzegorz Szymaszek wrote:
> Set the SDMMC2 VQMMC supply to vdd (buck3). Note that in the
> corresponding Linux kernel device tree, the supply is set to v3v3
> (buck4), which is wrong.
> 
> Signed-off-by: Grzegorz Szymaszek <gszymaszek at short.pl>
> Cc: Patrice Chotard <patrice.chotard at foss.st.com>
> Cc: Patrick Delaunay <patrick.delaunay at foss.st.com>
> Reviewed-by: Patrice Chotard <patrice.chotard at foss.st.com>
> ---
> Changes for v2:
>    - rebased on current master (patch not changed)
>    - added Patrice Chotard’s Reviewed-by
> 
>  arch/arm/dts/stm32mp157c-odyssey-som.dtsi | 1 +
>  1 file changed, 1 insertion(+)
> 
> diff --git a/arch/arm/dts/stm32mp157c-odyssey-som.dtsi b/arch/arm/dts/stm32mp157c-odyssey-som.dtsi
> index 7323325e60..583812f137 100644
> --- a/arch/arm/dts/stm32mp157c-odyssey-som.dtsi
> +++ b/arch/arm/dts/stm32mp157c-odyssey-som.dtsi
> @@ -273,6 +273,7 @@
>  	st,neg-edge;
>  	bus-width = <8>;
>  	vmmc-supply = <&v3v3>;
> +	vqmmc-supply = <&vdd>;
>  	status = "okay";
>  };
>  
> 
Applied on u-boot-stm32/next

Thanks