[PATCH] arm64: rk3399: Add support NanoPi R4s 1gb
Kever Yang
kever.yang at rock-chips.com
Tue Jun 8 08:50:33 CEST 2021
Hi xiaobo,
There is already a nonopi-r4s board, why we need a 1GB? This should
be already support.
Thanks,
- Kever
On 2021/6/8 上午9:28, xiaobo wrote:
> NanoPi R4s is SBC base on Rockchip RK3399 hexa-core processor with
> dual-Core Cortex-A72 and Mali-T864 GPU with 1GiB(DDR3-1866) of RAM
>
> Signed-off-by: xiaobo <peterwillcn at gmail.com>
> ---
> arch/arm/dts/Makefile | 1 +
> .../arm/dts/rk3399-nanopi-r4s-1gb-u-boot.dtsi | 16 ++
> arch/arm/dts/rk3399-nanopi-r4s-1gb.dts | 138 ++++++++++++++++++
> board/rockchip/evb_rk3399/MAINTAINERS | 6 +
> configs/nanopi-r4s-1gb-rk3399_defconfig | 62 ++++++++
> 5 files changed, 223 insertions(+)
> create mode 100644 arch/arm/dts/rk3399-nanopi-r4s-1gb-u-boot.dtsi
> create mode 100644 arch/arm/dts/rk3399-nanopi-r4s-1gb.dts
> create mode 100644 configs/nanopi-r4s-1gb-rk3399_defconfig
>
> diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
> index 096068261d..ef71e09829 100644
> --- a/arch/arm/dts/Makefile
> +++ b/arch/arm/dts/Makefile
> @@ -134,6 +134,7 @@ dtb-$(CONFIG_ROCKCHIP_RK3399) += \
> rk3399-nanopi-m4b.dtb \
> rk3399-nanopi-neo4.dtb \
> rk3399-nanopi-r4s.dtb \
> + rk3399-nanopi-r4s-1gb.dtb \
> rk3399-orangepi.dtb \
> rk3399-pinebook-pro.dtb \
> rk3399-puma-haikou.dtb \
> diff --git a/arch/arm/dts/rk3399-nanopi-r4s-1gb-u-boot.dtsi b/arch/arm/dts/rk3399-nanopi-r4s-1gb-u-boot.dtsi
> new file mode 100644
> index 0000000000..caa81eaace
> --- /dev/null
> +++ b/arch/arm/dts/rk3399-nanopi-r4s-1gb-u-boot.dtsi
> @@ -0,0 +1,16 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * RK3399-based FriendlyElec boards device tree source
> + *
> + * Copyright (c) 2016 Fuzhou Rockchip Electronics Co., Ltd
> + *
> + * Copyright (c) 2018 FriendlyElec Computer Tech. Co., Ltd.
> + * (http://www.friendlyarm.com)
> + *
> + * Copyright (c) 2018 Collabora Ltd.
> + * Copyright (c) 2019 Arm Ltd.
> + * Copyright (C) 2020 Xiaobo <peterwillcn at gmail.com>
> + */
> +
> +#include "rk3399-nanopi4-u-boot.dtsi"
> +#include "rk3399-sdram-ddr3-1866.dtsi"
> diff --git a/arch/arm/dts/rk3399-nanopi-r4s-1gb.dts b/arch/arm/dts/rk3399-nanopi-r4s-1gb.dts
> new file mode 100644
> index 0000000000..6f2cf17bf1
> --- /dev/null
> +++ b/arch/arm/dts/rk3399-nanopi-r4s-1gb.dts
> @@ -0,0 +1,138 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Copyright (c) 2016 Fuzhou Rockchip Electronics Co., Ltd
> + *
> + * Copyright (c) 2018 FriendlyElec Computer Tech. Co., Ltd.
> + * (http://www.friendlyarm.com)
> + *
> + * Copyright (c) 2018 Collabora Ltd.
> + * Copyright (c) 2019 Arm Ltd.
> + * Copyright (C) 2020 Xiaobo <peterwillcn at gmail.com>
> + */
> +
> +/dts-v1/;
> +#include "rk3399-nanopi4.dtsi"
> +
> +/ {
> + model = "FriendlyElec NanoPi R4S";
> + compatible = "friendlyarm,nanopi-r4s", "rockchip,rk3399";
> +
> + aliases {
> + ethernet1 = &r8169;
> + };
> +
> + vdd_5v: vdd-5v {
> + compatible = "regulator-fixed";
> + regulator-name = "vdd_5v";
> + regulator-always-on;
> + regulator-boot-on;
> + };
> +
> + fan: pwm-fan {
> + compatible = "pwm-fan";
> + cooling-levels = <0 12 18 255>;
> + #cooling-cells = <2>;
> + fan-supply = <&vdd_5v>;
> + pwms = <&pwm1 0 50000 0>;
> + };
> +};
> +
> +&cpu_thermal {
> + trips {
> + cpu_warm: cpu_warm {
> + temperature = <55000>;
> + hysteresis = <2000>;
> + type = "active";
> + };
> +
> + cpu_hot: cpu_hot {
> + temperature = <65000>;
> + hysteresis = <2000>;
> + type = "active";
> + };
> + };
> +
> + cooling-maps {
> + map2 {
> + trip = <&cpu_warm>;
> + cooling-device = <&fan THERMAL_NO_LIMIT 1>;
> + };
> +
> + map3 {
> + trip = <&cpu_hot>;
> + cooling-device = <&fan 2 THERMAL_NO_LIMIT>;
> + };
> + };
> +};
> +
> +&emmc_phy {
> + status = "disabled";
> +};
> +
> +&fusb0 {
> + status = "disabled";
> +};
> +
> +&leds {
> + lan_led: led-1 {
> + gpios = <&gpio1 RK_PA1 GPIO_ACTIVE_HIGH>;
> + label = "nanopi-r4s:green:lan";
> + };
> +
> + wan_led: led-2 {
> + gpios = <&gpio1 RK_PA0 GPIO_ACTIVE_HIGH>;
> + label = "nanopi-r4s:green:wan";
> + };
> +};
> +
> +&leds_gpio {
> + rockchip,pins =
> + <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>,
> + <1 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>,
> + <1 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>;
> +};
> +
> +&pcie0 {
> + max-link-speed = <1>;
> + num-lanes = <1>;
> + vpcie3v3-supply = <&vcc3v3_sys>;
> +
> + pcie at 0 {
> + reg = <0x00000000 0 0 0 0>;
> + #address-cells = <3>;
> + #size-cells = <2>;
> +
> + r8169: pcie at 0,0 {
> + reg = <0x000000 0 0 0 0>;
> + local-mac-address = [ 00 00 00 00 00 00 ];
> + };
> + };
> +};
> +
> +&sdhci {
> + status = "disabled";
> +};
> +
> +&sdio0 {
> + status = "disabled";
> +};
> +
> +&sdmmc {
> + host-index-min = <1>;
> +};
> +
> +&u2phy0_host {
> + phy-supply = <&vdd_5v>;
> +};
> +
> +&u2phy1_host {
> + status = "disabled";
> +};
> +
> +&usbdrd_dwc3_0 {
> + dr_mode = "host";
> +};
> +
> +&vcc3v3_sys {
> + vin-supply = <&vcc5v0_sys>;
> +};
> diff --git a/board/rockchip/evb_rk3399/MAINTAINERS b/board/rockchip/evb_rk3399/MAINTAINERS
> index 25e308d186..b4a6a9ced3 100644
> --- a/board/rockchip/evb_rk3399/MAINTAINERS
> +++ b/board/rockchip/evb_rk3399/MAINTAINERS
> @@ -67,6 +67,12 @@ S: Maintained
> F: configs/nanopi-r4s-rk3399_defconfig
> F: arch/arm/dts/rk3399-nanopi-r4s-u-boot.dtsi
>
> +NANOPI-R4S-1GB
> +M: Xiaobo Tian <peterwillcn at gmail.com>
> +S: Maintained
> +F: configs/nanopi-r4s-1gb-rk3399_defconfig
> +F: arch/arm/dts/rk3399-nanopi-r4s-1gb-u-boot.dtsi
> +
> ORANGEPI-RK3399
> M: Jagan Teki <jagan at amarulasolutions.com>
> S: Maintained
> diff --git a/configs/nanopi-r4s-1gb-rk3399_defconfig b/configs/nanopi-r4s-1gb-rk3399_defconfig
> new file mode 100644
> index 0000000000..d08e75c687
> --- /dev/null
> +++ b/configs/nanopi-r4s-1gb-rk3399_defconfig
> @@ -0,0 +1,62 @@
> +CONFIG_ARM=y
> +CONFIG_ARCH_ROCKCHIP=y
> +CONFIG_SYS_TEXT_BASE=0x00200000
> +CONFIG_NR_DRAM_BANKS=1
> +CONFIG_ENV_OFFSET=0x3F8000
> +CONFIG_ROCKCHIP_RK3399=y
> +CONFIG_TARGET_EVB_RK3399=y
> +CONFIG_DEBUG_UART_BASE=0xFF1A0000
> +CONFIG_DEBUG_UART_CLOCK=24000000
> +CONFIG_DEFAULT_DEVICE_TREE="rk3399-nanopi-r4s-1gb"
> +CONFIG_DEBUG_UART=y
> +CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-nanopi-r4s-1gb.dtb"
> +CONFIG_DISPLAY_BOARDINFO_LATE=y
> +# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
> +CONFIG_SPL_STACK_R=y
> +CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x10000
> +CONFIG_TPL=y
> +CONFIG_CMD_BOOTZ=y
> +CONFIG_CMD_GPT=y
> +CONFIG_CMD_MMC=y
> +CONFIG_CMD_USB=y
> +# CONFIG_CMD_SETEXPR is not set
> +CONFIG_CMD_TIME=y
> +CONFIG_SPL_OF_CONTROL=y
> +CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
> +CONFIG_ENV_IS_IN_MMC=y
> +CONFIG_SYS_RELOC_GD_ENV_ADDR=y
> +CONFIG_SYS_MMC_ENV_DEV=1
> +CONFIG_ROCKCHIP_GPIO=y
> +CONFIG_SYS_I2C_ROCKCHIP=y
> +CONFIG_MMC_DW=y
> +CONFIG_MMC_DW_ROCKCHIP=y
> +CONFIG_MMC_SDHCI=y
> +CONFIG_MMC_SDHCI_ROCKCHIP=y
> +CONFIG_DM_ETH=y
> +CONFIG_ETH_DESIGNWARE=y
> +CONFIG_GMAC_ROCKCHIP=y
> +CONFIG_PMIC_RK8XX=y
> +CONFIG_REGULATOR_PWM=y
> +CONFIG_REGULATOR_RK8XX=y
> +CONFIG_PWM_ROCKCHIP=y
> +CONFIG_BAUDRATE=1500000
> +CONFIG_DEBUG_UART_SHIFT=2
> +CONFIG_SYSRESET=y
> +CONFIG_USB=y
> +CONFIG_USB_XHCI_HCD=y
> +CONFIG_USB_XHCI_DWC3=y
> +CONFIG_USB_EHCI_HCD=y
> +CONFIG_USB_EHCI_GENERIC=y
> +CONFIG_USB_KEYBOARD=y
> +CONFIG_USB_HOST_ETHER=y
> +CONFIG_USB_ETHER_ASIX=y
> +CONFIG_USB_ETHER_ASIX88179=y
> +CONFIG_USB_ETHER_MCS7830=y
> +CONFIG_USB_ETHER_RTL8152=y
> +CONFIG_USB_ETHER_SMSC95XX=y
> +CONFIG_DM_VIDEO=y
> +CONFIG_DISPLAY=y
> +CONFIG_VIDEO_ROCKCHIP=y
> +CONFIG_DISPLAY_ROCKCHIP_HDMI=y
> +CONFIG_SPL_TINY_MEMSET=y
> +CONFIG_ERRNO_STR=y
More information about the U-Boot
mailing list