[PATCH u-boot-marvell v2 0/6] Changes for Turris MOX

Marek Behún marek.behun at nic.cz
Mon Jun 7 16:34:45 CEST 2021

Hello Stefan,

Here are some changes for Turris MOX (v2):
- dts changes
- more config options enabled
- rescue mode support added

If it is possible, since this touches only our device, we would like
this to be also merged for v2021.07 (once reviewed by you and Pali).

Changes since v1:
- use constant addresses instead of ${kernel_addr_r} and
  ${ramdisk_addr_r} in bootcmd_rescue, so that this command won't fail
  if those addresses are changed
- dropped last patch changing internal-regs node name in dts. We don't
  need this now, let's do this in the future once we will be aligning
  U-Boot's DTS with kernel's DTS

Marek Behún (6):
  arm: mvebu: dts: turris_mox: add button and LED nodes
  arm: mvebu: turris_mox: add support for board rescue mode
  arm: mvebu: turris_mox: start blinking PHY LEDs when entering rescue
  arm: mvebu: configs: turris_mox: add fdtfile default env variable
  arm: mvebu: dts: turris_mox: add nodes for SPI NOR partitions
  arm: mvebu: turris_mox: enable options for Turris network boot

 arch/arm/dts/armada-3720-turris-mox.dts |  55 ++++++++++++
 board/CZ.NIC/turris_mox/turris_mox.c    | 106 ++++++++++++++++++++++++
 configs/turris_mox_defconfig            |  14 ++++
 include/configs/turris_mox.h            |  10 +++
 4 files changed, 185 insertions(+)


More information about the U-Boot mailing list