[PATCH v2 01/14] board: freescale: Refactor NXP common mux code
Stephen Carlson
stcarlso at linux.microsoft.com
Thu Jun 24 21:32:25 CEST 2021
Refactors similar mux code from multiple NXP boards into a common location,
and allows it to be disabled in config.
New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality.
Signed-off-by: Stephen Carlson <stcarlso at linux.microsoft.com>
---
board/freescale/common/Kconfig | 6 +++
board/freescale/common/Makefile | 11 ++++++
board/freescale/common/i2c_common.c | 34 +++++++++++++++++
board/freescale/common/i2c_common.h | 30 +++++++++++++++
board/freescale/common/i2c_mux.c | 40 ++++++++++++++++++++
board/freescale/common/i2c_mux.h | 15 ++++++++
board/freescale/common/vid.c | 58 ++++++-----------------------
7 files changed, 148 insertions(+), 46 deletions(-)
create mode 100644 board/freescale/common/i2c_common.c
create mode 100644 board/freescale/common/i2c_common.h
create mode 100644 board/freescale/common/i2c_mux.c
create mode 100644 board/freescale/common/i2c_mux.h
diff --git a/board/freescale/common/Kconfig b/board/freescale/common/Kconfig
index 17db755951..ab9c14ae88 100644
--- a/board/freescale/common/Kconfig
+++ b/board/freescale/common/Kconfig
@@ -21,6 +21,12 @@ config CMD_ESBC_VALIDATE
esbc_validate - validate signature using RSA verification
esbc_halt - put the core in spin loop (Secure Boot Only)
+config FSL_USE_PCA9547_MUX
+ bool "Enable PCA9547 I2C Mux on Freescale boards"
+ default n
+ help
+ This option enables the PCA9547 I2C mux on Freescale boards.
+
config VID
depends on DM_I2C
bool "Enable Freescale VID"
diff --git a/board/freescale/common/Makefile b/board/freescale/common/Makefile
index 114b7ba8f9..45aaa16ca4 100644
--- a/board/freescale/common/Makefile
+++ b/board/freescale/common/Makefile
@@ -15,6 +15,15 @@ ifdef MINIMAL
# necessary to create built-in.o
obj- := __dummy__.o
else
+# include i2c_common.o once if either VID or FSL_USE_PCA9547_MUX
+I2C_COMMON=
+ifdef CONFIG_VID
+I2C_COMMON=y
+endif
+ifdef CONFIG_FSL_USE_PCA9547_MUX
+I2C_COMMON=y
+endif
+
obj-$(CONFIG_FSL_CADMUS) += cadmus.o
obj-$(CONFIG_FSL_VIA) += cds_via.o
obj-$(CONFIG_FMAN_ENET) += fman.o
@@ -22,6 +31,8 @@ obj-$(CONFIG_FSL_PIXIS) += pixis.o
ifndef CONFIG_SPL_BUILD
obj-$(CONFIG_FSL_NGPIXIS) += ngpixis.o
endif
+obj-$(I2C_COMMON) += i2c_common.o
+obj-$(CONFIG_FSL_USE_PCA9547_MUX) += i2c_mux.o
obj-$(CONFIG_VID) += vid.o
obj-$(CONFIG_FSL_QIXIS) += qixis.o
obj-$(CONFIG_PQ_MDS_PIB) += pq-mds-pib.o
diff --git a/board/freescale/common/i2c_common.c b/board/freescale/common/i2c_common.c
new file mode 100644
index 0000000000..0f09ed7d34
--- /dev/null
+++ b/board/freescale/common/i2c_common.c
@@ -0,0 +1,34 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2014 Freescale Semiconductor, Inc.
+ * Copyright 2020-21 NXP
+ * Copyright 2021 Microsoft Corporation
+ */
+
+#include <common.h>
+#include <i2c.h>
+#include "i2c_common.h"
+
+#ifdef CONFIG_DM_I2C
+
+/* If DM is in use, retrieve the chip for the specified bus number */
+int fsl_i2c_get_device(int address, int bus, DEVICE_HANDLE_T *dev)
+{
+ int ret = i2c_get_chip_for_busnum(bus, address, 1, dev);
+
+ if (ret)
+ printf("I2C: Bus %d has no device with address 0x%02X\n",
+ bus, address);
+ return ret;
+}
+
+#else
+
+/* Handle is passed directly */
+int fsl_i2c_get_device(int address, int bus, DEVICE_HANDLE_T *dev)
+{
+ *dev = address;
+ return 0;
+}
+
+#endif
diff --git a/board/freescale/common/i2c_common.h b/board/freescale/common/i2c_common.h
new file mode 100644
index 0000000000..840ad66183
--- /dev/null
+++ b/board/freescale/common/i2c_common.h
@@ -0,0 +1,30 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2014 Freescale Semiconductor, Inc.
+ * Copyright 2020-21 NXP
+ * Copyright 2021 Microsoft Corporation
+ */
+
+#ifndef __NXP_I2C_COMMON_H__
+#define __NXP_I2C_COMMON_H__
+
+/* Common functionality shared by the I2C drivers for VID and the mux. */
+#ifdef CONFIG_DM_I2C
+#define DEVICE_HANDLE_T struct udevice *
+
+#define I2C_READ(dev, register, data, length) \
+ dm_i2c_read(dev, register, data, length)
+#define I2C_WRITE(dev, register, data, length) \
+ dm_i2c_write(dev, register, data, length)
+#else
+#define DEVICE_HANDLE_T int
+
+#define I2C_READ(dev, register, data, length) \
+ i2c_read(dev, register, 1, data, length)
+#define I2C_WRITE(dev, register, data, length) \
+ i2c_write(dev, register, 1, data, length)
+#endif
+
+int fsl_i2c_get_device(int address, int bus, DEVICE_HANDLE_T *dev);
+
+#endif
diff --git a/board/freescale/common/i2c_mux.c b/board/freescale/common/i2c_mux.c
new file mode 100644
index 0000000000..54f89e2576
--- /dev/null
+++ b/board/freescale/common/i2c_mux.c
@@ -0,0 +1,40 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2014 Freescale Semiconductor, Inc.
+ * Copyright 2020-21 NXP
+ * Copyright 2021 Microsoft Corporation
+ */
+
+#include <common.h>
+#include <i2c.h>
+#include "i2c_common.h"
+#include "i2c_mux.h"
+
+/*
+ * A new Kconfig option for something that used to always be built should be
+ * “default y”.
+ */
+#ifdef CONFIG_FSL_USE_PCA9547_MUX
+
+int select_i2c_ch_pca9547(u8 ch, int bus)
+{
+ int ret;
+ DEVICE_HANDLE_T dev;
+
+ /* Open device handle */
+ ret = fsl_i2c_get_device(I2C_MUX_PCA_ADDR_PRI, bus, &dev);
+ if (ret) {
+ printf("PCA: No PCA9547 device found\n");
+ return ret;
+ }
+
+ ret = I2C_WRITE(dev, 0, &ch, sizeof(ch));
+ if (ret) {
+ printf("PCA: Unable to select channel %d (%d)\n", (int)ch, ret);
+ return ret;
+ }
+
+ return 0;
+}
+
+#endif
diff --git a/board/freescale/common/i2c_mux.h b/board/freescale/common/i2c_mux.h
new file mode 100644
index 0000000000..0870c1918e
--- /dev/null
+++ b/board/freescale/common/i2c_mux.h
@@ -0,0 +1,15 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2014 Freescale Semiconductor, Inc.
+ * Copyright 2020-21 NXP
+ * Copyright 2021 Microsoft Corporation
+ */
+
+#ifndef __NXP_I2C_MUX_H__
+#define __NXP_I2C_MUX_H__
+
+#ifdef CONFIG_FSL_USE_PCA9547_MUX
+int select_i2c_ch_pca9547(u8 ch, int bus);
+#endif
+
+#endif
diff --git a/board/freescale/common/vid.c b/board/freescale/common/vid.c
index 13ef101e7f..d2c9bbbfe9 100644
--- a/board/freescale/common/vid.c
+++ b/board/freescale/common/vid.c
@@ -20,8 +20,13 @@
#include <asm/immap_85xx.h>
#endif
#include <linux/delay.h>
+#include "i2c_common.h"
#include "vid.h"
+#ifndef I2C_VOL_MONITOR_BUS
+#define I2C_VOL_MONITOR_BUS 0
+#endif
+
/* Voltages are generally handled in mV to keep them as integers */
#define MV_PER_V 1000
@@ -95,44 +100,6 @@ u16 __weak soc_get_fuse_vid(int vid_index)
#define I2C_VOL_MONITOR_ADDR 0
#endif
-#if CONFIG_IS_ENABLED(DM_I2C)
-#define DEVICE_HANDLE_T struct udevice *
-
-#ifndef I2C_VOL_MONITOR_BUS
-#define I2C_VOL_MONITOR_BUS 0
-#endif
-
-/* If DM is in use, retrieve the udevice chip for the specified bus number */
-static int vid_get_device(int address, DEVICE_HANDLE_T *dev)
-{
- int ret = i2c_get_chip_for_busnum(I2C_VOL_MONITOR_BUS, address, 1, dev);
-
- if (ret)
- printf("VID: Bus %d has no device with address 0x%02X\n",
- I2C_VOL_MONITOR_BUS, address);
- return ret;
-}
-
-#define I2C_READ(dev, register, data, length) \
- dm_i2c_read(dev, register, data, length)
-#define I2C_WRITE(dev, register, data, length) \
- dm_i2c_write(dev, register, data, length)
-#else
-#define DEVICE_HANDLE_T int
-
-/* If DM is not in use, I2C addresses are passed directly */
-static int vid_get_device(int address, DEVICE_HANDLE_T *dev)
-{
- *dev = address;
- return 0;
-}
-
-#define I2C_READ(dev, register, data, length) \
- i2c_read(dev, register, 1, data, length)
-#define I2C_WRITE(dev, register, data, length) \
- i2c_write(dev, register, 1, data, length)
-#endif
-
#if defined(CONFIG_VOL_MONITOR_IR36021_SET) || \
defined(CONFIG_VOL_MONITOR_IR36021_READ)
/*
@@ -158,7 +125,7 @@ static int find_ir_chip_on_i2c(void)
/* Check all the address */
for (i = 0; i < (sizeof(ir_i2c_addr)/sizeof(ir_i2c_addr[0])); i++) {
i2caddress = ir_i2c_addr[i];
- ret = vid_get_device(i2caddress, &dev);
+ ret = fsl_i2c_get_device(i2caddress, I2C_VOL_MONITOR_BUS, &dev);
if (!ret) {
ret = I2C_READ(dev, IR36021_MFR_ID_OFFSET,
(void *)&mfrID, sizeof(mfrID));
@@ -202,7 +169,7 @@ static int read_voltage_from_INA220(int i2caddress)
DEVICE_HANDLE_T dev;
/* Open device handle */
- ret = vid_get_device(i2caddress, &dev);
+ ret = fsl_i2c_get_device(i2caddress, I2C_VOL_MONITOR_BUS, &dev);
if (ret)
return ret;
@@ -243,7 +210,7 @@ static int read_voltage_from_IR(int i2caddress)
DEVICE_HANDLE_T dev;
/* Open device handle */
- ret = vid_get_device(i2caddress, &dev);
+ ret = fsl_i2c_get_device(i2caddress, I2C_VOL_MONITOR_BUS, &dev);
if (ret)
return ret;
@@ -344,7 +311,7 @@ static int read_voltage_from_pmbus(int i2caddress)
DEVICE_HANDLE_T dev;
/* Open device handle */
- ret = vid_get_device(i2caddress, &dev);
+ ret = fsl_i2c_get_device(i2caddress, I2C_VOL_MONITOR_BUS, &dev);
if (ret)
return ret;
@@ -457,7 +424,7 @@ static int set_voltage_to_IR(int i2caddress, int vdd)
DEVICE_HANDLE_T dev;
/* Open device handle */
- ret = vid_get_device(i2caddress, &dev);
+ ret = fsl_i2c_get_device(i2caddress, I2C_VOL_MONITOR_BUS, &dev);
if (ret)
return ret;
@@ -503,7 +470,7 @@ static int set_voltage_to_pmbus(int i2caddress, int vdd)
DEVICE_HANDLE_T dev;
/* Open device handle */
- ret = vid_get_device(i2caddress, &dev);
+ ret = fsl_i2c_get_device(i2caddress, I2C_VOL_MONITOR_BUS, &dev);
if (ret)
return ret;
@@ -653,7 +620,7 @@ int adjust_vdd(ulong vdd_override)
debug("VID: IR Chip found on I2C address 0x%02x\n", i2caddress);
}
- ret = vid_get_device(i2caddress, &dev);
+ ret = fsl_i2c_get_device(i2caddress, I2C_VOL_MONITOR_BUS, &dev);
if (ret)
return ret;
@@ -785,7 +752,6 @@ exit:
i2c_multiplexer_select_vid_channel(I2C_MUX_CH_DEFAULT);
return ret < 0 ? -1 : 0;
-
}
static int do_vdd_override(struct cmd_tbl *cmdtp,
--
2.17.1
More information about the U-Boot
mailing list