[PATCH v6 2/2] dt-bindings: add xilinx clocking wizard bindings

[Zhengxun Li]

Hi Sean,

Thank you for your reply.

Sean Anderson <sean.anderson at seco.com> 於 2021年6月15日 週二 下午2:52寫道：
>
>
>
> On 6/15/21 1:21 PM, Zhengxun Li wrote:
>  > Hi Michal,
>  >
>  > Sean Anderson <sean.anderson at seco.com> 於 2021年6月11日 週五 下午3:07寫道：
>  >>
>  >>
>  >>
>  >> On 6/11/21 11:10 AM, Zhengxun wrote:
>  >>   > Add the devicetree binding for the xilinx clocking wizard.
>  >>   >
>  >>   > Signed-off-by: Zhengxun <zhengxunli.mxic at gmail.com>
>  >>   > ---
>  >>   >   .../clock/xlnx,clocking-wizard.txt            | 43 +++++++++++++++++++
>  >>   >   1 file changed, 43 insertions(+)
>  >>   >   create mode 100644 doc/device-tree-bindings/clock/xlnx,clocking-wizard.txt
>  >>
>  >> Should this be .yml? In general, I believe we only need to document
>  >> bindings in U-Boot if they differ from Linux. In Linux, I see that
>  >> Documentation/devicetree/bindings/clock/xlnx,clocking-wizard.txt exists.
>
> Because the binding is documented in Linux, we do not need to document
> it in U-Boot.
>
>  >> Will you be upstreaming this conversion to yaml?
>
> This patch documents the binding in yaml. However, the version in Linux
> is in old-style txt. Will you be sending a patch to Linux to convert
> this binding to yaml?

In linux, I saw Shubhrajyoti Datta do this, although it has not been
accepted yet. The link is below.

https://patchwork.kernel.org/project/linux-clk/patch/1617886723-27117-2-git-send-email-shubhrajyoti.datta@xilinx.com/

Should I do this again?

Thanks,
Zhengxun