[PATCH] arm: snapdragon: Use correct GICC register on APQ8016

Sheep Sun sunxiaoyang2003 at gmail.com
Mon Jun 14 06:27:45 CEST 2021

The GICC register used by u-boot is 0x0a20c000, which is actually a GICC
for WCNSS, the WLAN processor. U-boot runs on the Application Processor,
therefore it should use APCS GICC instead. Hence, correct it with APCS GICC
register address.

Signed-off-by: Sheep Sun <sunxiaoyang2003 at gmail.com>

 arch/arm/mach-snapdragon/include/mach/sysmap-apq8016.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/mach-snapdragon/include/mach/sysmap-apq8016.h b/arch/arm/mach-snapdragon/include/mach/sysmap-apq8016.h
index 520e2e6bd7..d9a3b1af98 100644
--- a/arch/arm/mach-snapdragon/include/mach/sysmap-apq8016.h
+++ b/arch/arm/mach-snapdragon/include/mach/sysmap-apq8016.h
@@ -8,7 +8,7 @@
 #define _MACH_SYSMAP_APQ8016_H
 #define GICD_BASE			(0x0b000000)
-#define GICC_BASE			(0x0a20c000)
+#define GICC_BASE			(0x0b002000)
 /* Clocks: (from CLK_CTL_BASE)  */
 #define GPLL0_STATUS			(0x2101C)

More information about the U-Boot mailing list