[PATCH v3 2/7] arm: dts: ls1028a: enable internal RGMII delays for the LS1028A-QDS AR8035 PHY

[Ramon Fried]

On Tue, Jun 29, 2021 at 8:55 PM Vladimir Oltean <vladimir.oltean at nxp.com> wrote:
>
> There are no PCB trace delays on this board, so the PHY needs to enable
> its internal ones in order to have a proper electrical connection to the
> enetc MAC.
>
> Fixes: b32e9a757837 ("arm: dts: ls1028a updates for network interfaces")
> Signed-off-by: Vladimir Oltean <vladimir.oltean at nxp.com>
> ---
> v2->v3: none
> v1->v2: none
>
>  arch/arm/dts/fsl-ls1028a-qds.dtsi | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/arch/arm/dts/fsl-ls1028a-qds.dtsi b/arch/arm/dts/fsl-ls1028a-qds.dtsi
> index da89ff96e98c..69632fa796b5 100644
> --- a/arch/arm/dts/fsl-ls1028a-qds.dtsi
> +++ b/arch/arm/dts/fsl-ls1028a-qds.dtsi
> @@ -251,7 +251,7 @@
>
>  &enetc1 {
>         status = "okay";
> -       phy-mode = "rgmii";
> +       phy-mode = "rgmii-id";
>         phy-handle = <&qds_phy0>;
>  };
>
> --
> 2.25.1
>
Applied to u-boot-net/master, Thanks !
Ramon