[PATCH v3 3/7] arm: dts: ls1028a: declare the fixed-link speeds for the internal ENETC ports

[Vladimir Oltean]

To comply with the device tree bindings expectations for an Ethernet
controller, as well as to simplify the driver code, declare fixed-link
nodes for the internal ENETC ports (attached to the mscc_felix switch).

Signed-off-by: Vladimir Oltean <vladimir.oltean at nxp.com>
---
v2->v3: none
v1->v2: none

 arch/arm/dts/fsl-ls1028a.dtsi | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/arch/arm/dts/fsl-ls1028a.dtsi b/arch/arm/dts/fsl-ls1028a.dtsi
index c7c725a4fc84..21f4ef78a059 100644
--- a/arch/arm/dts/fsl-ls1028a.dtsi
+++ b/arch/arm/dts/fsl-ls1028a.dtsi
@@ -144,12 +144,22 @@
 			reg = <0x000200 0 0 0 0>;
 			status = "okay";
 			phy-mode = "internal";
+
+			fixed-link {
+				speed = <2500>;
+				full-duplex;
+			};
 		};
 		mdio0: pci at 0,3 {
 			#address-cells=<0>;
 			#size-cells=<1>;
 			reg = <0x000300 0 0 0 0>;
 			status = "disabled";
+
+			fixed-link {
+				speed = <1000>;
+				full-duplex;
+			};
 		};
 
 		mscc_felix: pci at 0,5 {
-- 
2.25.1