[PATCH v3 02/11] clk: k210: Rewrite to remove CCF
Sean Anderson
seanga2 at gmail.com
Fri Jun 11 06:16:08 CEST 2021
This is effectively a complete rewrite to remove all dependency on CCF.
The code is now smaller, and so is the binary. It also takes up less memory
at runtime (since we don't have to create 40 udevices). In general, I am
much happier with this driver as much of the complexity and late binding
has been removed.
The k210_*_params structs which were previously used to initialize CCF
clocks are now used as the complete configuration. Since we can write our
own division logic, we can now do away with several "half" clocks which
only existed to provide constant factors of two.
The clock IDs have been renumbered to remove unused clocks. This may not be
the last time they are renumbered, since we have diverged with Linux. There
are also still a few clocks left out which may need to be added back in.
In general, I have tried to leave out behavioral changes. However, there is
a small bugfix regarding ACLK. According to the technical reference manual,
its mux comes *after* its divider (which is present only for PLL0). This
would have required yet another intermediate clock to fix with CCF, but
with the new driver it is just 2 lines of code :)
Signed-off-by: Sean Anderson <seanga2 at gmail.com>
---
(no changes since v1)
drivers/clk/kendryte/Kconfig | 2 +-
drivers/clk/kendryte/clk.c | 848 +++++++++++-------------
drivers/clk/kendryte/pll.c | 114 ++--
include/dt-bindings/clock/k210-sysctl.h | 94 ++-
include/kendryte/pll.h | 26 +-
5 files changed, 499 insertions(+), 585 deletions(-)
diff --git a/drivers/clk/kendryte/Kconfig b/drivers/clk/kendryte/Kconfig
index 073fca0781..0dc8e3f889 100644
--- a/drivers/clk/kendryte/Kconfig
+++ b/drivers/clk/kendryte/Kconfig
@@ -1,6 +1,6 @@
config CLK_K210
bool "Clock support for Kendryte K210"
- depends on CLK && CLK_CCF && CLK_COMPOSITE_CCF
+ depends on CLK
help
This enables support clock driver for Kendryte K210 platforms.
diff --git a/drivers/clk/kendryte/clk.c b/drivers/clk/kendryte/clk.c
index 41c712e03f..34e8e742a6 100644
--- a/drivers/clk/kendryte/clk.c
+++ b/drivers/clk/kendryte/clk.c
@@ -4,7 +4,7 @@
*/
#include <kendryte/clk.h>
-#include <asm/io.h>
+#include <common.h>
#include <dt-bindings/clock/k210-sysctl.h>
#include <dt-bindings/mfd/k210-sysctl.h>
#include <dm.h>
@@ -14,77 +14,6 @@
#include <kendryte/bypass.h>
#include <kendryte/pll.h>
-/* All methods are delegated to CCF clocks */
-
-static ulong k210_clk_get_rate(struct clk *clk)
-{
- struct clk *c;
- int err = clk_get_by_id(clk->id, &c);
-
- if (err)
- return err;
- return clk_get_rate(c);
-}
-
-static ulong k210_clk_set_rate(struct clk *clk, unsigned long rate)
-{
- struct clk *c;
- int err = clk_get_by_id(clk->id, &c);
-
- if (err)
- return err;
- return clk_set_rate(c, rate);
-}
-
-static int k210_clk_set_parent(struct clk *clk, struct clk *parent)
-{
- struct clk *c, *p;
- int err = clk_get_by_id(clk->id, &c);
-
- if (err)
- return err;
-
- err = clk_get_by_id(parent->id, &p);
- if (err)
- return err;
-
- return clk_set_parent(c, p);
-}
-
-static int k210_clk_endisable(struct clk *clk, bool enable)
-{
- struct clk *c;
- int err = clk_get_by_id(clk->id, &c);
-
- if (err)
- return err;
- return enable ? clk_enable(c) : clk_disable(c);
-}
-
-static int k210_clk_enable(struct clk *clk)
-{
- return k210_clk_endisable(clk, true);
-}
-
-static int k210_clk_disable(struct clk *clk)
-{
- return k210_clk_endisable(clk, false);
-}
-
-static const struct clk_ops k210_clk_ops = {
- .set_rate = k210_clk_set_rate,
- .get_rate = k210_clk_get_rate,
- .set_parent = k210_clk_set_parent,
- .enable = k210_clk_enable,
- .disable = k210_clk_disable,
-};
-
-/* Parents for muxed clocks */
-static const char * const generic_sels[] = { "in0_half", "pll0_half" };
-/* The first clock is in0, which is filled in by k210_clk_probe */
-static const char *aclk_sels[] = { NULL, "pll0_half" };
-static const char *pll2_sels[] = { NULL, "pll0", "pll1" };
-
/*
* All parameters for different sub-clocks are collected into parameter arrays.
* These parameters are then initialized by the clock which uses them during
@@ -97,68 +26,113 @@ static const char *pll2_sels[] = { NULL, "pll0", "pll1" };
* easy to find bugs in the code.
*/
-#define DIV(id, off, shift, width) DIV_FLAGS(id, off, shift, width, 0)
+/**
+ * enum k210_clk_div_type - The type of divider
+ * @K210_DIV_ONE: freq = parent / (reg + 1)
+ * @K210_DIV_EVEN: freq = parent / 2 / (reg + 1)
+ * @K210_DIV_POWER: freq = parent / (2 << reg)
+ * @K210_DIV_FIXED: freq = parent / factor
+ */
+enum k210_clk_div_type {
+ K210_DIV_ONE,
+ K210_DIV_EVEN,
+ K210_DIV_POWER,
+ K210_DIV_FIXED,
+};
+
+/**
+ * struct k210_div_params - Parameters for dividing clocks
+ * @type: An &enum k210_clk_div_type specifying the dividing formula
+ * @off: The offset of the divider from the sysctl base address
+ * @shift: The offset of the LSB of the divider
+ * @width: The number of bits in the divider
+ * @div: The fixed divisor for this divider
+ */
+struct k210_div_params {
+ u8 type;
+ union {
+ struct {
+ u8 off;
+ u8 shift;
+ u8 width;
+ };
+ u8 div;
+ };
+};
+
#define DIV_LIST \
- DIV_FLAGS(K210_CLK_ACLK, K210_SYSCTL_SEL0, 1, 2, \
- CLK_DIVIDER_POWER_OF_TWO) \
- DIV(K210_CLK_APB0, K210_SYSCTL_SEL0, 3, 3) \
- DIV(K210_CLK_APB1, K210_SYSCTL_SEL0, 6, 3) \
- DIV(K210_CLK_APB2, K210_SYSCTL_SEL0, 9, 3) \
- DIV(K210_CLK_SRAM0, K210_SYSCTL_THR0, 0, 4) \
- DIV(K210_CLK_SRAM1, K210_SYSCTL_THR0, 4, 4) \
- DIV(K210_CLK_AI, K210_SYSCTL_THR0, 8, 4) \
- DIV(K210_CLK_DVP, K210_SYSCTL_THR0, 12, 4) \
- DIV(K210_CLK_ROM, K210_SYSCTL_THR0, 16, 4) \
- DIV(K210_CLK_SPI0, K210_SYSCTL_THR1, 0, 8) \
- DIV(K210_CLK_SPI1, K210_SYSCTL_THR1, 8, 8) \
- DIV(K210_CLK_SPI2, K210_SYSCTL_THR1, 16, 8) \
- DIV(K210_CLK_SPI3, K210_SYSCTL_THR1, 24, 8) \
- DIV(K210_CLK_TIMER0, K210_SYSCTL_THR2, 0, 8) \
- DIV(K210_CLK_TIMER1, K210_SYSCTL_THR2, 8, 8) \
- DIV(K210_CLK_TIMER2, K210_SYSCTL_THR2, 16, 8) \
- DIV(K210_CLK_I2S0, K210_SYSCTL_THR3, 0, 16) \
- DIV(K210_CLK_I2S1, K210_SYSCTL_THR3, 16, 16) \
- DIV(K210_CLK_I2S2, K210_SYSCTL_THR4, 0, 16) \
- DIV(K210_CLK_I2S0_M, K210_SYSCTL_THR4, 16, 8) \
- DIV(K210_CLK_I2S1_M, K210_SYSCTL_THR4, 24, 8) \
- DIV(K210_CLK_I2S2_M, K210_SYSCTL_THR4, 0, 8) \
- DIV(K210_CLK_I2C0, K210_SYSCTL_THR5, 8, 8) \
- DIV(K210_CLK_I2C1, K210_SYSCTL_THR5, 16, 8) \
- DIV(K210_CLK_I2C2, K210_SYSCTL_THR5, 24, 8) \
- DIV(K210_CLK_WDT0, K210_SYSCTL_THR6, 0, 8) \
- DIV(K210_CLK_WDT1, K210_SYSCTL_THR6, 8, 8)
+ DIV(K210_CLK_ACLK, K210_SYSCTL_SEL0, 1, 2, K210_DIV_POWER) \
+ DIV(K210_CLK_APB0, K210_SYSCTL_SEL0, 3, 3, K210_DIV_ONE) \
+ DIV(K210_CLK_APB1, K210_SYSCTL_SEL0, 6, 3, K210_DIV_ONE) \
+ DIV(K210_CLK_APB2, K210_SYSCTL_SEL0, 9, 3, K210_DIV_ONE) \
+ DIV(K210_CLK_SRAM0, K210_SYSCTL_THR0, 0, 4, K210_DIV_ONE) \
+ DIV(K210_CLK_SRAM1, K210_SYSCTL_THR0, 4, 4, K210_DIV_ONE) \
+ DIV(K210_CLK_AI, K210_SYSCTL_THR0, 8, 4, K210_DIV_ONE) \
+ DIV(K210_CLK_DVP, K210_SYSCTL_THR0, 12, 4, K210_DIV_ONE) \
+ DIV(K210_CLK_ROM, K210_SYSCTL_THR0, 16, 4, K210_DIV_ONE) \
+ DIV(K210_CLK_SPI0, K210_SYSCTL_THR1, 0, 8, K210_DIV_EVEN) \
+ DIV(K210_CLK_SPI1, K210_SYSCTL_THR1, 8, 8, K210_DIV_EVEN) \
+ DIV(K210_CLK_SPI2, K210_SYSCTL_THR1, 16, 8, K210_DIV_EVEN) \
+ DIV(K210_CLK_SPI3, K210_SYSCTL_THR1, 24, 8, K210_DIV_EVEN) \
+ DIV(K210_CLK_TIMER0, K210_SYSCTL_THR2, 0, 8, K210_DIV_EVEN) \
+ DIV(K210_CLK_TIMER1, K210_SYSCTL_THR2, 8, 8, K210_DIV_EVEN) \
+ DIV(K210_CLK_TIMER2, K210_SYSCTL_THR2, 16, 8, K210_DIV_EVEN) \
+ DIV(K210_CLK_I2S0, K210_SYSCTL_THR3, 0, 16, K210_DIV_EVEN) \
+ DIV(K210_CLK_I2S1, K210_SYSCTL_THR3, 16, 16, K210_DIV_EVEN) \
+ DIV(K210_CLK_I2S2, K210_SYSCTL_THR4, 0, 16, K210_DIV_EVEN) \
+ DIV(K210_CLK_I2S0_M, K210_SYSCTL_THR4, 16, 8, K210_DIV_EVEN) \
+ DIV(K210_CLK_I2S1_M, K210_SYSCTL_THR4, 24, 8, K210_DIV_EVEN) \
+ DIV(K210_CLK_I2S2_M, K210_SYSCTL_THR4, 0, 8, K210_DIV_EVEN) \
+ DIV(K210_CLK_I2C0, K210_SYSCTL_THR5, 8, 8, K210_DIV_EVEN) \
+ DIV(K210_CLK_I2C1, K210_SYSCTL_THR5, 16, 8, K210_DIV_EVEN) \
+ DIV(K210_CLK_I2C2, K210_SYSCTL_THR5, 24, 8, K210_DIV_EVEN) \
+ DIV(K210_CLK_WDT0, K210_SYSCTL_THR6, 0, 8, K210_DIV_EVEN) \
+ DIV(K210_CLK_WDT1, K210_SYSCTL_THR6, 8, 8, K210_DIV_EVEN) \
+ DIV_FIXED(K210_CLK_CLINT, 50) \
#define _DIVIFY(id) K210_CLK_DIV_##id
#define DIVIFY(id) _DIVIFY(id)
-enum k210_div_ids {
-#define DIV_FLAGS(id, ...) DIVIFY(id),
+enum k210_div_id {
+#define DIV(id, ...) DIVIFY(id),
+#define DIV_FIXED DIV
DIV_LIST
-#undef DIV_FLAGS
-};
-
-struct k210_div_params {
- u8 off;
- u8 shift;
- u8 width;
- u8 flags;
+#undef DIV
+#undef DIV_FIXED
+ K210_CLK_DIV_NONE,
};
static const struct k210_div_params k210_divs[] = {
-#define DIV_FLAGS(id, _off, _shift, _width, _flags) \
+#define DIV(id, _off, _shift, _width, _type) \
[DIVIFY(id)] = { \
+ .type = (_type), \
.off = (_off), \
.shift = (_shift), \
.width = (_width), \
- .flags = (_flags), \
+ },
+#define DIV_FIXED(id, _div) \
+ [DIVIFY(id)] = { \
+ .type = K210_DIV_FIXED, \
+ .div = (_div) \
},
DIV_LIST
-#undef DIV_FLAGS
+#undef DIV
+#undef DIV_FIXED
};
#undef DIV
#undef DIV_LIST
+/**
+ * struct k210_gate_params - Parameters for gated clocks
+ * @off: The offset of the gate from the sysctl base address
+ * @bit_idx: The index of the bit within the register
+ */
+struct k210_gate_params {
+ u8 off;
+ u8 bit_idx;
+};
+
#define GATE_LIST \
GATE(K210_CLK_CPU, K210_SYSCTL_EN_CENT, 0) \
GATE(K210_CLK_SRAM0, K210_SYSCTL_EN_CENT, 1) \
@@ -199,15 +173,11 @@ static const struct k210_div_params k210_divs[] = {
#define _GATEIFY(id) K210_CLK_GATE_##id
#define GATEIFY(id) _GATEIFY(id)
-enum k210_gate_ids {
+enum k210_gate_id {
#define GATE(id, ...) GATEIFY(id),
GATE_LIST
#undef GATE
-};
-
-struct k210_gate_params {
- u8 off;
- u8 bit_idx;
+ K210_CLK_GATE_NONE,
};
static const struct k210_gate_params k210_gates[] = {
@@ -222,11 +192,31 @@ static const struct k210_gate_params k210_gates[] = {
#undef GATE_LIST
+/* The most parents is PLL2 */
+#define K210_CLK_MAX_PARENTS 3
+
+/**
+ * struct k210_mux_params - Parameters for muxed clocks
+ * @parents: A list of parent clock ids
+ * @num_parents: The number of parent clocks
+ * @off: The offset of the mux from the base sysctl address
+ * @shift: The offset of the LSB of the mux selector
+ * @width: The number of bits in the mux selector
+ */
+struct k210_mux_params {
+ u8 parents[K210_CLK_MAX_PARENTS];
+ u8 num_parents;
+ u8 off;
+ u8 shift;
+ u8 width;
+};
+
#define MUX(id, reg, shift, width) \
- MUX_PARENTS(id, generic_sels, reg, shift, width)
+ MUX_PARENTS(id, reg, shift, width, K210_CLK_IN0, K210_CLK_PLL0)
#define MUX_LIST \
- MUX_PARENTS(K210_CLK_PLL2, pll2_sels, K210_SYSCTL_PLL2, 26, 2) \
- MUX_PARENTS(K210_CLK_ACLK, aclk_sels, K210_SYSCTL_SEL0, 0, 1) \
+ MUX_PARENTS(K210_CLK_PLL2, K210_SYSCTL_PLL2, 26, 2, \
+ K210_CLK_IN0, K210_CLK_PLL0, K210_CLK_PLL1) \
+ MUX(K210_CLK_ACLK, K210_SYSCTL_SEL0, 0, 1) \
MUX(K210_CLK_SPI3, K210_SYSCTL_SEL0, 12, 1) \
MUX(K210_CLK_TIMER0, K210_SYSCTL_SEL0, 13, 1) \
MUX(K210_CLK_TIMER1, K210_SYSCTL_SEL0, 14, 1) \
@@ -235,26 +225,18 @@ static const struct k210_gate_params k210_gates[] = {
#define _MUXIFY(id) K210_CLK_MUX_##id
#define MUXIFY(id) _MUXIFY(id)
-enum k210_mux_ids {
+enum k210_mux_id {
#define MUX_PARENTS(id, ...) MUXIFY(id),
MUX_LIST
#undef MUX_PARENTS
K210_CLK_MUX_NONE,
};
-struct k210_mux_params {
- const char *const *parent_names;
- u8 num_parents;
- u8 off;
- u8 shift;
- u8 width;
-};
-
static const struct k210_mux_params k210_muxes[] = {
-#define MUX_PARENTS(id, parents, _off, _shift, _width) \
+#define MUX_PARENTS(id, _off, _shift, _width, ...) \
[MUXIFY(id)] = { \
- .parent_names = (const char * const *)(parents), \
- .num_parents = ARRAY_SIZE(parents), \
+ .parents = { __VA_ARGS__ }, \
+ .num_parents = __count_args(__VA_ARGS__), \
.off = (_off), \
.shift = (_shift), \
.width = (_width), \
@@ -266,389 +248,321 @@ static const struct k210_mux_params k210_muxes[] = {
#undef MUX
#undef MUX_LIST
-struct k210_pll_params {
- u8 off;
- u8 lock_off;
- u8 shift;
- u8 width;
+/**
+ * enum k210_clk_flags - The type of a K210 clock
+ * @K210_CLKF_MUX: This clock has a mux and not a static parent
+ * @K210_CLKF_PLL: This clock is a PLL
+ */
+enum k210_clk_flags {
+ K210_CLKF_MUX = BIT(0),
+ K210_CLKF_PLL = BIT(1),
};
-static const struct k210_pll_params k210_plls[] = {
-#define PLL(_off, _shift, _width) { \
- .off = (_off), \
- .lock_off = K210_SYSCTL_PLL_LOCK, \
- .shift = (_shift), \
- .width = (_width), \
-}
- [0] = PLL(K210_SYSCTL_PLL0, 0, 2),
- [1] = PLL(K210_SYSCTL_PLL1, 8, 1),
- [2] = PLL(K210_SYSCTL_PLL2, 16, 1),
-#undef PLL
+/**
+ * struct k210_clk_params - The parameters defining a K210 clock
+ * @name: The name of the clock
+ * @flags: A set of &enum k210_clk_flags defining which fields are valid
+ * @mux: An &enum k210_mux_id of this clock's mux
+ * @parent: The clock id of this clock's parent
+ * @pll: The id of the PLL (if this clock is a PLL)
+ * @div: An &enum k210_div_id of this clock's divider
+ * @gate: An &enum k210_gate_id of this clock's gate
+ */
+struct k210_clk_params {
+#if CONFIG_IS_ENABLED(CMD_CLK)
+ const char *name;
+#endif
+ u8 flags;
+ union {
+ u8 parent;
+ u8 mux;
+ };
+ union {
+ u8 pll;
+ struct {
+ u8 div;
+ u8 gate;
+ };
+ };
};
-#define COMP(id) \
- COMP_FULL(id, MUXIFY(id), DIVIFY(id), GATEIFY(id))
-#define COMP_NOMUX(id) \
- COMP_FULL(id, K210_CLK_MUX_NONE, DIVIFY(id), GATEIFY(id))
-#define COMP_LIST \
- COMP(K210_CLK_SPI3) \
- COMP(K210_CLK_TIMER0) \
- COMP(K210_CLK_TIMER1) \
- COMP(K210_CLK_TIMER2) \
- COMP_NOMUX(K210_CLK_SRAM0) \
- COMP_NOMUX(K210_CLK_SRAM1) \
- COMP_NOMUX(K210_CLK_ROM) \
- COMP_NOMUX(K210_CLK_DVP) \
- COMP_NOMUX(K210_CLK_APB0) \
- COMP_NOMUX(K210_CLK_APB1) \
- COMP_NOMUX(K210_CLK_APB2) \
- COMP_NOMUX(K210_CLK_AI) \
- COMP_NOMUX(K210_CLK_I2S0) \
- COMP_NOMUX(K210_CLK_I2S1) \
- COMP_NOMUX(K210_CLK_I2S2) \
- COMP_NOMUX(K210_CLK_WDT0) \
- COMP_NOMUX(K210_CLK_WDT1) \
- COMP_NOMUX(K210_CLK_SPI0) \
- COMP_NOMUX(K210_CLK_SPI1) \
- COMP_NOMUX(K210_CLK_SPI2) \
- COMP_NOMUX(K210_CLK_I2C0) \
- COMP_NOMUX(K210_CLK_I2C1) \
- COMP_NOMUX(K210_CLK_I2C2)
-#define _COMPIFY(id) K210_CLK_COMP_##id
-#define COMPIFY(id) _COMPIFY(id)
-
-enum k210_comp_ids {
-#define COMP_FULL(id, ...) COMPIFY(id),
- COMP_LIST
-#undef COMP_FULL
-};
-
-struct k210_comp_params {
- u8 mux;
- u8 div;
- u8 gate;
-};
-
-static const struct k210_comp_params k210_comps[] = {
-#define COMP_FULL(id, _mux, _div, _gate) \
- [COMPIFY(id)] = { \
+static const struct k210_clk_params k210_clks[] = {
+#if CONFIG_IS_ENABLED(CMD_CLK)
+#define NAME(_name) .name = (_name),
+#else
+#define NAME(name)
+#endif
+#define CLK(id, _name, _parent, _div, _gate) \
+ [id] = { \
+ NAME(_name) \
+ .parent = (_parent), \
+ .div = (_div), \
+ .gate = (_gate), \
+ }
+#define CLK_MUX(id, _name, _mux, _div, _gate) \
+ [id] = { \
+ NAME(_name) \
+ .flags = K210_CLKF_MUX, \
.mux = (_mux), \
.div = (_div), \
.gate = (_gate), \
+ }
+#define CLK_PLL(id, _pll, _parent) \
+ [id] = { \
+ NAME("pll" #_pll) \
+ .flags = K210_CLKF_PLL, \
+ .parent = (_parent), \
+ .pll = (_pll), \
+ }
+#define CLK_FULL(id, name) \
+ CLK_MUX(id, name, MUXIFY(id), DIVIFY(id), GATEIFY(id))
+#define CLK_NOMUX(id, name, parent) \
+ CLK(id, name, parent, DIVIFY(id), GATEIFY(id))
+#define CLK_DIV(id, name, parent) \
+ CLK(id, name, parent, DIVIFY(id), K210_CLK_GATE_NONE)
+#define CLK_GATE(id, name, parent) \
+ CLK(id, name, parent, K210_CLK_DIV_NONE, GATEIFY(id))
+ CLK_PLL(K210_CLK_PLL0, 0, K210_CLK_IN0),
+ CLK_PLL(K210_CLK_PLL1, 1, K210_CLK_IN0),
+ [K210_CLK_PLL2] = {
+ NAME("pll2")
+ .flags = K210_CLKF_MUX | K210_CLKF_PLL,
+ .mux = MUXIFY(K210_CLK_PLL2),
+ .pll = 2,
},
- COMP_LIST
-#undef COMP_FULL
+ CLK_MUX(K210_CLK_ACLK, "aclk", MUXIFY(K210_CLK_ACLK),
+ DIVIFY(K210_CLK_ACLK), K210_CLK_GATE_NONE),
+ CLK_FULL(K210_CLK_SPI3, "spi3"),
+ CLK_FULL(K210_CLK_TIMER0, "timer0"),
+ CLK_FULL(K210_CLK_TIMER1, "timer1"),
+ CLK_FULL(K210_CLK_TIMER2, "timer2"),
+ CLK_NOMUX(K210_CLK_SRAM0, "sram0", K210_CLK_ACLK),
+ CLK_NOMUX(K210_CLK_SRAM1, "sram1", K210_CLK_ACLK),
+ CLK_NOMUX(K210_CLK_ROM, "rom", K210_CLK_ACLK),
+ CLK_NOMUX(K210_CLK_DVP, "dvp", K210_CLK_ACLK),
+ CLK_NOMUX(K210_CLK_APB0, "apb0", K210_CLK_ACLK),
+ CLK_NOMUX(K210_CLK_APB1, "apb1", K210_CLK_ACLK),
+ CLK_NOMUX(K210_CLK_APB2, "apb2", K210_CLK_ACLK),
+ CLK_NOMUX(K210_CLK_AI, "ai", K210_CLK_PLL1),
+ CLK_NOMUX(K210_CLK_I2S0, "i2s0", K210_CLK_PLL2),
+ CLK_NOMUX(K210_CLK_I2S1, "i2s1", K210_CLK_PLL2),
+ CLK_NOMUX(K210_CLK_I2S2, "i2s2", K210_CLK_PLL2),
+ CLK_NOMUX(K210_CLK_WDT0, "wdt0", K210_CLK_IN0),
+ CLK_NOMUX(K210_CLK_WDT1, "wdt1", K210_CLK_IN0),
+ CLK_NOMUX(K210_CLK_SPI0, "spi0", K210_CLK_PLL0),
+ CLK_NOMUX(K210_CLK_SPI1, "spi1", K210_CLK_PLL0),
+ CLK_NOMUX(K210_CLK_SPI2, "spi2", K210_CLK_PLL0),
+ CLK_NOMUX(K210_CLK_I2C0, "i2c0", K210_CLK_PLL0),
+ CLK_NOMUX(K210_CLK_I2C1, "i2c1", K210_CLK_PLL0),
+ CLK_NOMUX(K210_CLK_I2C2, "i2c2", K210_CLK_PLL0),
+ CLK_DIV(K210_CLK_I2S0_M, "i2s0_m", K210_CLK_PLL2),
+ CLK_DIV(K210_CLK_I2S1_M, "i2s1_m", K210_CLK_PLL2),
+ CLK_DIV(K210_CLK_I2S2_M, "i2s2_m", K210_CLK_PLL2),
+ CLK_DIV(K210_CLK_CLINT, "clint", K210_CLK_ACLK),
+ CLK_GATE(K210_CLK_CPU, "cpu", K210_CLK_ACLK),
+ CLK_GATE(K210_CLK_DMA, "dma", K210_CLK_ACLK),
+ CLK_GATE(K210_CLK_FFT, "fft", K210_CLK_ACLK),
+ CLK_GATE(K210_CLK_GPIO, "gpio", K210_CLK_APB0),
+ CLK_GATE(K210_CLK_UART1, "uart1", K210_CLK_APB0),
+ CLK_GATE(K210_CLK_UART2, "uart2", K210_CLK_APB0),
+ CLK_GATE(K210_CLK_UART3, "uart3", K210_CLK_APB0),
+ CLK_GATE(K210_CLK_FPIOA, "fpioa", K210_CLK_APB0),
+ CLK_GATE(K210_CLK_SHA, "sha", K210_CLK_APB0),
+ CLK_GATE(K210_CLK_AES, "aes", K210_CLK_APB1),
+ CLK_GATE(K210_CLK_OTP, "otp", K210_CLK_APB1),
+ CLK_GATE(K210_CLK_RTC, "rtc", K210_CLK_IN0),
+#undef NAME
+#undef CLK_PLL
+#undef CLK
+#undef CLK_FULL
+#undef CLK_NOMUX
+#undef CLK_DIV
+#undef CLK_GATE
+#undef CLK_LIST
};
-#undef COMP
-#undef COMP_ID
-#undef COMP_NOMUX
-#undef COMP_NOMUX_ID
-#undef COMP_LIST
-
-static struct clk *k210_bypass_children __section(".data");
-
-/* Helper functions to create sub-clocks */
-static struct clk_mux *k210_create_mux(const struct k210_mux_params *params,
- void *base)
+static u32 k210_clk_readl(struct k210_clk_priv *priv, u8 off, u8 shift,
+ u8 width)
{
- struct clk_mux *mux = kzalloc(sizeof(*mux), GFP_KERNEL);
+ u32 reg = readl(priv->base + off);
- if (!mux)
- return mux;
-
- mux->reg = base + params->off;
- mux->mask = BIT(params->width) - 1;
- mux->shift = params->shift;
- mux->parent_names = params->parent_names;
- mux->num_parents = params->num_parents;
-
- return mux;
+ return (reg >> shift) & (BIT(width) - 1);
}
-static struct clk_divider *k210_create_div(const struct k210_div_params *params,
- void *base)
+static void k210_clk_writel(struct k210_clk_priv *priv, u8 off, u8 shift,
+ u8 width, u32 val)
{
- struct clk_divider *div = kzalloc(sizeof(*div), GFP_KERNEL);
+ u32 reg = readl(priv->base + off);
+ u32 mask = (BIT(width) - 1) << shift;
- if (!div)
- return div;
-
- div->reg = base + params->off;
- div->shift = params->shift;
- div->width = params->width;
- div->flags = params->flags;
-
- return div;
+ reg &= ~mask;
+ reg |= mask & (val << shift);
+ writel(reg, priv->base + off);
}
-static struct clk_gate *k210_create_gate(const struct k210_gate_params *params,
- void *base)
+static int k210_clk_get_parent(struct k210_clk_priv *priv, int id)
{
- struct clk_gate *gate = kzalloc(sizeof(*gate), GFP_KERNEL);
+ u32 sel;
+ const struct k210_mux_params *mux;
- if (!gate)
- return gate;
+ if (!(k210_clks[id].flags & K210_CLKF_MUX))
+ return k210_clks[id].parent;
+ mux = &k210_muxes[k210_clks[id].mux];
- gate->reg = base + params->off;
- gate->bit_idx = params->bit_idx;
-
- return gate;
+ sel = k210_clk_readl(priv, mux->off, mux->shift, mux->width);
+ assert(sel < mux->num_parents);
+ return mux->parents[sel];
}
-static struct k210_pll *k210_create_pll(const struct k210_pll_params *params,
- void *base)
+static ulong do_k210_clk_get_rate(struct k210_clk_priv *priv, int id)
{
- struct k210_pll *pll = kzalloc(sizeof(*pll), GFP_KERNEL);
+ int parent;
+ u32 val;
+ ulong parent_rate;
+ const struct k210_div_params *div;
- if (!pll)
- return pll;
+ if (id == K210_CLK_IN0)
+ return clk_get_rate(&priv->in0);
- pll->reg = base + params->off;
- pll->lock = base + params->lock_off;
- pll->shift = params->shift;
- pll->width = params->width;
+ parent = k210_clk_get_parent(priv, id);
+ parent_rate = do_k210_clk_get_rate(priv, parent);
- return pll;
+ if (k210_clks[id].flags & K210_CLKF_PLL)
+ return k210_pll_get_rate(priv, k210_clks[id].pll, parent_rate);
+
+ if (k210_clks[id].div == K210_CLK_DIV_NONE)
+ return parent_rate;
+ div = &k210_divs[k210_clks[id].div];
+
+ if (div->type == K210_DIV_FIXED)
+ return parent_rate / div->div;
+
+ val = k210_clk_readl(priv, div->off, div->shift, div->width);
+ switch (div->type) {
+ case K210_DIV_ONE:
+ return parent_rate / (val + 1);
+ case K210_DIV_EVEN:
+ return parent_rate / 2 / (val + 1);
+ case K210_DIV_POWER:
+ /* This is ACLK, which has no divider on IN0 */
+ if (parent == K210_CLK_IN0)
+ return parent_rate;
+ return parent_rate / (2 << val);
+ default:
+ assert(false);
+ return -EINVAL;
+ };
}
-/* Create all sub-clocks, and then register the composite clock */
-static struct clk *k210_register_comp(const struct k210_comp_params *params,
- void *base, const char *name,
- const char *parent)
+static ulong k210_clk_get_rate(struct clk *clk)
{
- const char *const *parent_names;
- int num_parents;
- struct clk *comp;
- const struct clk_ops *mux_ops;
- struct clk_mux *mux;
- struct clk_divider *div;
- struct clk_gate *gate;
+ return do_k210_clk_get_rate(dev_get_priv(clk->dev), clk->id);
+}
- if (params->mux == K210_CLK_MUX_NONE) {
- if (!parent)
- return ERR_PTR(-EINVAL);
+static ulong k210_clk_set_rate(struct clk *clk, unsigned long rate)
+{
+ return -ENOSYS;
+}
- mux_ops = NULL;
- mux = NULL;
- parent_names = &parent;
- num_parents = 1;
- } else {
- mux_ops = &clk_mux_ops;
- mux = k210_create_mux(&k210_muxes[params->mux], base);
- if (!mux)
- return ERR_PTR(-ENOMEM);
+static int do_k210_clk_set_parent(struct k210_clk_priv *priv, int id, int new)
+{
+ int i;
+ const struct k210_mux_params *mux;
- parent_names = mux->parent_names;
- num_parents = mux->num_parents;
+ if (!(k210_clks[id].flags & K210_CLKF_MUX))
+ return -ENOSYS;
+ mux = &k210_muxes[k210_clks[id].mux];
+
+ for (i = 0; i < mux->num_parents; i++) {
+ if (mux->parents[i] == new) {
+ k210_clk_writel(priv, mux->off, mux->shift, mux->width,
+ i);
+ return 0;
+ }
+ }
+ return -EINVAL;
+}
+
+static int k210_clk_set_parent(struct clk *clk, struct clk *parent)
+{
+ return do_k210_clk_set_parent(dev_get_priv(clk->dev), clk->id,
+ parent->id);
+}
+
+static int k210_clk_endisable(struct k210_clk_priv *priv, int id, bool enable)
+{
+ int parent = k210_clk_get_parent(priv, id);
+ const struct k210_gate_params *gate;
+
+ if (id == K210_CLK_IN0) {
+ if (enable)
+ return clk_enable(&priv->in0);
+ else
+ return clk_disable(&priv->in0);
}
- div = k210_create_div(&k210_divs[params->div], base);
- if (!div) {
- comp = ERR_PTR(-ENOMEM);
- goto cleanup_mux;
+ /* Only recursively enable clocks since we don't track refcounts */
+ if (enable) {
+ int ret = k210_clk_endisable(priv, parent, true);
+
+ if (ret && ret != -ENOSYS)
+ return ret;
}
- gate = k210_create_gate(&k210_gates[params->gate], base);
- if (!gate) {
- comp = ERR_PTR(-ENOMEM);
- goto cleanup_div;
+ if (k210_clks[id].flags & K210_CLKF_PLL) {
+ if (enable)
+ return k210_pll_enable(priv, k210_clks[id].pll);
+ else
+ return k210_pll_disable(priv, k210_clks[id].pll);
}
- comp = clk_register_composite(NULL, name, parent_names, num_parents,
- &mux->clk, mux_ops,
- &div->clk, &clk_divider_ops,
- &gate->clk, &clk_gate_ops, 0);
- if (IS_ERR(comp))
- goto cleanup_gate;
- return comp;
+ if (k210_clks[id].gate == K210_CLK_GATE_NONE)
+ return -ENOSYS;
+ gate = &k210_gates[k210_clks[id].gate];
-cleanup_gate:
- free(gate);
-cleanup_div:
- free(div);
-cleanup_mux:
- free(mux);
- return comp;
-}
-
-static bool __section(".data") probed;
-
-/* reset probed so we will probe again post-relocation */
-static int k210_clk_bind(struct udevice *dev)
-{
- probed = false;
+ k210_clk_writel(priv, gate->off, gate->bit_idx, 1, enable);
return 0;
}
+static int k210_clk_enable(struct clk *clk)
+{
+ return k210_clk_endisable(dev_get_priv(clk->dev), clk->id, true);
+}
+
+static int k210_clk_disable(struct clk *clk)
+{
+ return k210_clk_endisable(dev_get_priv(clk->dev), clk->id, false);
+}
+
+static int k210_clk_request(struct clk *clk)
+{
+ if (clk->id >= ARRAY_SIZE(k210_clks))
+ return -EINVAL;
+ return 0;
+}
+
+static const struct clk_ops k210_clk_ops = {
+ .request = k210_clk_request,
+ .set_rate = k210_clk_set_rate,
+ .get_rate = k210_clk_get_rate,
+ .set_parent = k210_clk_set_parent,
+ .enable = k210_clk_enable,
+ .disable = k210_clk_disable,
+};
+
static int k210_clk_probe(struct udevice *dev)
{
int ret;
- const char *in0;
- struct clk *in0_clk, *bypass;
- struct clk_mux *mux;
- struct clk_divider *div;
- struct k210_pll *pll;
- void *base;
+ struct k210_clk_priv *priv = dev_get_priv(dev);
- /*
- * Only one instance of this driver allowed. This prevents weird bugs
- * when the driver fails part-way through probing. Some clocks will
- * already have been registered, and re-probing will register them
- * again, creating a bunch of duplicates. Better error-handling/cleanup
- * could fix this, but it's Probably Not Worth It (TM).
- */
- if (probed)
+ priv->base = dev_read_addr_ptr(dev_get_parent(dev));
+ if (!priv->base)
return -EINVAL;
- base = dev_read_addr_ptr(dev_get_parent(dev));
- if (!base)
- return -EINVAL;
-
- in0_clk = kzalloc(sizeof(*in0_clk), GFP_KERNEL);
- if (!in0_clk)
- return -ENOMEM;
-
- ret = clk_get_by_index(dev, 0, in0_clk);
+ ret = clk_get_by_index(dev, 0, &priv->in0);
if (ret)
return ret;
- in0 = in0_clk->dev->name;
-
- probed = true;
-
- aclk_sels[0] = in0;
- pll2_sels[0] = in0;
-
- /*
- * All PLLs have a broken bypass, but pll0 has the CPU downstream, so we
- * need to manually reparent it whenever we configure pll0
- */
- pll = k210_create_pll(&k210_plls[0], base);
- if (pll) {
- bypass = k210_register_bypass("pll0", in0, &pll->clk,
- &k210_pll_ops, in0_clk);
- clk_dm(K210_CLK_PLL0, bypass);
- } else {
- return -ENOMEM;
- }
-
- pll = k210_create_pll(&k210_plls[1], base);
- if (pll)
- clk_dm(K210_CLK_PLL1,
- k210_register_pll_struct("pll1", in0, pll));
-
- /* PLL2 is muxed, so set up a composite clock */
- mux = k210_create_mux(&k210_muxes[MUXIFY(K210_CLK_PLL2)], base);
- pll = k210_create_pll(&k210_plls[2], base);
- if (!mux || !pll) {
- free(mux);
- free(pll);
- } else {
- clk_dm(K210_CLK_PLL2,
- clk_register_composite(NULL, "pll2", pll2_sels,
- ARRAY_SIZE(pll2_sels),
- &mux->clk, &clk_mux_ops,
- &pll->clk, &k210_pll_ops,
- &pll->clk, &k210_pll_ops, 0));
- }
-
- /* Half-frequency clocks for "even" dividers */
- clk_dm(K210_CLK_IN0_H, k210_clk_half("in0_half", in0));
- clk_dm(K210_CLK_PLL0_H, k210_clk_half("pll0_half", "pll0"));
- clk_dm(K210_CLK_PLL2_H, k210_clk_half("pll2_half", "pll2"));
-
- /* ACLK has no gate */
- mux = k210_create_mux(&k210_muxes[MUXIFY(K210_CLK_ACLK)], base);
- div = k210_create_div(&k210_divs[DIVIFY(K210_CLK_ACLK)], base);
- if (!mux || !div) {
- free(mux);
- free(div);
- } else {
- struct clk *aclk =
- clk_register_composite(NULL, "aclk", aclk_sels,
- ARRAY_SIZE(aclk_sels),
- &mux->clk, &clk_mux_ops,
- &div->clk, &clk_divider_ops,
- NULL, NULL, 0);
- clk_dm(K210_CLK_ACLK, aclk);
- if (!IS_ERR(aclk)) {
- k210_bypass_children = aclk;
- k210_bypass_set_children(bypass,
- &k210_bypass_children, 1);
- }
- }
-
-#define REGISTER_COMP(id, name) \
- clk_dm(id, \
- k210_register_comp(&k210_comps[COMPIFY(id)], base, name, NULL))
- REGISTER_COMP(K210_CLK_SPI3, "spi3");
- REGISTER_COMP(K210_CLK_TIMER0, "timer0");
- REGISTER_COMP(K210_CLK_TIMER1, "timer1");
- REGISTER_COMP(K210_CLK_TIMER2, "timer2");
-#undef REGISTER_COMP
-
- /* Dividing clocks, no mux */
-#define REGISTER_COMP_NOMUX(id, name, parent) \
- clk_dm(id, \
- k210_register_comp(&k210_comps[COMPIFY(id)], base, name, parent))
- REGISTER_COMP_NOMUX(K210_CLK_SRAM0, "sram0", "aclk");
- REGISTER_COMP_NOMUX(K210_CLK_SRAM1, "sram1", "aclk");
- REGISTER_COMP_NOMUX(K210_CLK_ROM, "rom", "aclk");
- REGISTER_COMP_NOMUX(K210_CLK_DVP, "dvp", "aclk");
- REGISTER_COMP_NOMUX(K210_CLK_APB0, "apb0", "aclk");
- REGISTER_COMP_NOMUX(K210_CLK_APB1, "apb1", "aclk");
- REGISTER_COMP_NOMUX(K210_CLK_APB2, "apb2", "aclk");
- REGISTER_COMP_NOMUX(K210_CLK_AI, "ai", "pll1");
- REGISTER_COMP_NOMUX(K210_CLK_I2S0, "i2s0", "pll2_half");
- REGISTER_COMP_NOMUX(K210_CLK_I2S1, "i2s1", "pll2_half");
- REGISTER_COMP_NOMUX(K210_CLK_I2S2, "i2s2", "pll2_half");
- REGISTER_COMP_NOMUX(K210_CLK_WDT0, "wdt0", "in0_half");
- REGISTER_COMP_NOMUX(K210_CLK_WDT1, "wdt1", "in0_half");
- REGISTER_COMP_NOMUX(K210_CLK_SPI0, "spi0", "pll0_half");
- REGISTER_COMP_NOMUX(K210_CLK_SPI1, "spi1", "pll0_half");
- REGISTER_COMP_NOMUX(K210_CLK_SPI2, "spi2", "pll0_half");
- REGISTER_COMP_NOMUX(K210_CLK_I2C0, "i2c0", "pll0_half");
- REGISTER_COMP_NOMUX(K210_CLK_I2C1, "i2c1", "pll0_half");
- REGISTER_COMP_NOMUX(K210_CLK_I2C2, "i2c2", "pll0_half");
-#undef REGISTER_COMP_NOMUX
-
- /* Dividing clocks */
-#define REGISTER_DIV(id, name, parent) do {\
- const struct k210_div_params *params = &k210_divs[DIVIFY(id)]; \
- clk_dm(id, \
- clk_register_divider(NULL, name, parent, 0, base + params->off, \
- params->shift, params->width, 0)); \
-} while (false)
- REGISTER_DIV(K210_CLK_I2S0_M, "i2s0_m", "pll2_half");
- REGISTER_DIV(K210_CLK_I2S1_M, "i2s1_m", "pll2_half");
- REGISTER_DIV(K210_CLK_I2S2_M, "i2s2_m", "pll2_half");
-#undef REGISTER_DIV
-
- /* Gated clocks */
-#define REGISTER_GATE(id, name, parent) do { \
- const struct k210_gate_params *params = &k210_gates[GATEIFY(id)]; \
- clk_dm(id, \
- clk_register_gate(NULL, name, parent, 0, base + params->off, \
- params->bit_idx, 0, NULL)); \
-} while (false)
- REGISTER_GATE(K210_CLK_CPU, "cpu", "aclk");
- REGISTER_GATE(K210_CLK_DMA, "dma", "aclk");
- REGISTER_GATE(K210_CLK_FFT, "fft", "aclk");
- REGISTER_GATE(K210_CLK_GPIO, "gpio", "apb0");
- REGISTER_GATE(K210_CLK_UART1, "uart1", "apb0");
- REGISTER_GATE(K210_CLK_UART2, "uart2", "apb0");
- REGISTER_GATE(K210_CLK_UART3, "uart3", "apb0");
- REGISTER_GATE(K210_CLK_FPIOA, "fpioa", "apb0");
- REGISTER_GATE(K210_CLK_SHA, "sha", "apb0");
- REGISTER_GATE(K210_CLK_AES, "aes", "apb1");
- REGISTER_GATE(K210_CLK_OTP, "otp", "apb1");
- REGISTER_GATE(K210_CLK_RTC, "rtc", in0);
-#undef REGISTER_GATE
-
- /* The MTIME register in CLINT runs at one 50th the CPU clock speed */
- clk_dm(K210_CLK_CLINT,
- clk_register_fixed_factor(NULL, "clint", "aclk", 0, 1, 50));
return 0;
}
@@ -663,6 +577,6 @@ U_BOOT_DRIVER(k210_clk) = {
.id = UCLASS_CLK,
.of_match = k210_clk_ids,
.ops = &k210_clk_ops,
- .bind = k210_clk_bind,
.probe = k210_clk_probe,
+ .priv_auto = sizeof(struct k210_clk_priv),
};
diff --git a/drivers/clk/kendryte/pll.c b/drivers/clk/kendryte/pll.c
index 184f37aaf2..1f0275c83f 100644
--- a/drivers/clk/kendryte/pll.c
+++ b/drivers/clk/kendryte/pll.c
@@ -12,17 +12,41 @@
#include <serial.h>
#include <asm/io.h>
#include <dt-bindings/clock/k210-sysctl.h>
+#include <dt-bindings/mfd/k210-sysctl.h>
#include <kendryte/pll.h>
#include <linux/bitfield.h>
#include <linux/clk-provider.h>
#include <linux/delay.h>
#include <linux/err.h>
-#define CLK_K210_PLL "k210_clk_pll"
+/**
+ * struct k210_pll_params - K210 PLL parameters
+ * @off: The offset of the PLL from the base sysctl address
+ * @shift: The offset of the LSB of the lock status
+ * @width: The number of bits in the lock status
+ */
+struct k210_pll_params {
+ u8 off;
+ u8 shift;
+ u8 width;
+};
+
+static const struct k210_pll_params k210_plls[] = {
+#define PLL(_off, _shift, _width) { \
+ .off = (_off), \
+ .shift = (_shift), \
+ .width = (_width), \
+}
+ [0] = PLL(K210_SYSCTL_PLL0, 0, 2),
+ [1] = PLL(K210_SYSCTL_PLL1, 8, 1),
+ [2] = PLL(K210_SYSCTL_PLL2, 16, 1),
+#undef PLL
+};
#ifdef CONFIG_CLK_K210_SET_RATE
-static int k210_pll_enable(struct clk *clk);
-static int k210_pll_disable(struct clk *clk);
+int k210_pll_enable(struct k210_clk_priv *priv, int id);
+int k210_pll_disable(struct k210_clk_priv *priv, int id);
+ulong k210_pll_get_rate(struct k210_clk_priv *priv, int id, ulong rate_in);
/*
* The PLL included with the Kendryte K210 appears to be a True Circuits, Inc.
@@ -423,12 +447,12 @@ TEST_STATIC int k210_pll_calc_config(u32 rate, u32 rate_in,
return 0;
}
-static ulong k210_pll_set_rate(struct clk *clk, ulong rate)
+static ulong k210_pll_set_rate(struct k210_clk_priv *priv, int id, ulong rate,
+ ulong rate_in)
{
int err;
- long long rate_in = clk_get_parent_rate(clk);
+ const struct k210_pll_params *pll = &k210_plls[id];
struct k210_pll_config config = {};
- struct k210_pll *pll = to_k210_pll(clk);
u32 reg;
if (rate_in < 0)
@@ -447,7 +471,7 @@ static ulong k210_pll_set_rate(struct clk *clk, ulong rate)
*/
k210_pll_disable(clk);
- reg = readl(pll->reg);
+ reg = readl(priv->base + pll->off);
reg &= ~K210_PLL_CLKR
& ~K210_PLL_CLKF
& ~K210_PLL_CLKOD
@@ -456,7 +480,7 @@ static ulong k210_pll_set_rate(struct clk *clk, ulong rate)
| FIELD_PREP(K210_PLL_CLKF, config.f - 1)
| FIELD_PREP(K210_PLL_CLKOD, config.od - 1)
| FIELD_PREP(K210_PLL_BWADJ, config.f - 1);
- writel(reg, pll->reg);
+ writel(reg, priv->base + pll->off);
err = k210_pll_enable(clk);
if (err)
@@ -465,14 +489,18 @@ static ulong k210_pll_set_rate(struct clk *clk, ulong rate)
serial_setbrg();
return clk_get_rate(clk);
}
+#else
+ulong k210_pll_set_rate(struct k210_clk_priv *priv, int id, ulong rate,
+ ulong rate_in)
+{
+ return -ENOSYS;
+}
#endif /* CONFIG_CLK_K210_SET_RATE */
-static ulong k210_pll_get_rate(struct clk *clk)
+ulong k210_pll_get_rate(struct k210_clk_priv *priv, int id, ulong rate_in)
{
- long long rate_in = clk_get_parent_rate(clk);
- struct k210_pll *pll = to_k210_pll(clk);
u64 r, f, od;
- u32 reg = readl(pll->reg);
+ u32 reg = readl(priv->base + k210_plls[id].off);
if (rate_in < 0 || (reg & K210_PLL_BYPASS))
return rate_in;
@@ -491,57 +519,58 @@ static ulong k210_pll_get_rate(struct clk *clk)
* Wait for the PLL to be locked. If the PLL is not locked, try clearing the
* slip before retrying
*/
-static void k210_pll_waitfor_lock(struct k210_pll *pll)
+void k210_pll_waitfor_lock(struct k210_clk_priv *priv, int id)
{
+ const struct k210_pll_params *pll = &k210_plls[id];
u32 mask = GENMASK(pll->width - 1, 0) << pll->shift;
while (true) {
- u32 reg = readl(pll->lock);
+ u32 reg = readl(priv->base + K210_SYSCTL_PLL_LOCK);
if ((reg & mask) == mask)
break;
reg |= BIT(pll->shift + K210_PLL_CLEAR_SLIP);
- writel(reg, pll->lock);
+ writel(reg, priv->base + K210_SYSCTL_PLL_LOCK);
}
}
/* Adapted from sysctl_pll_enable */
-static int k210_pll_enable(struct clk *clk)
+int k210_pll_enable(struct k210_clk_priv *priv, int id)
{
- struct k210_pll *pll = to_k210_pll(clk);
- u32 reg = readl(pll->reg);
+ const struct k210_pll_params *pll = &k210_plls[id];
+ u32 reg = readl(priv->base + pll->off);
if ((reg & K210_PLL_PWRD) && (reg & K210_PLL_EN) &&
!(reg & K210_PLL_RESET))
return 0;
reg |= K210_PLL_PWRD;
- writel(reg, pll->reg);
+ writel(reg, priv->base + pll->off);
/* Ensure reset is low before asserting it */
reg &= ~K210_PLL_RESET;
- writel(reg, pll->reg);
+ writel(reg, priv->base + pll->off);
reg |= K210_PLL_RESET;
- writel(reg, pll->reg);
+ writel(reg, priv->base + pll->off);
nop();
nop();
reg &= ~K210_PLL_RESET;
- writel(reg, pll->reg);
+ writel(reg, priv->base + pll->off);
- k210_pll_waitfor_lock(pll);
+ k210_pll_waitfor_lock(priv, id);
reg &= ~K210_PLL_BYPASS;
reg |= K210_PLL_EN;
- writel(reg, pll->reg);
+ writel(reg, priv->base + pll->off);
return 0;
}
-static int k210_pll_disable(struct clk *clk)
+int k210_pll_disable(struct k210_clk_priv *priv, int id)
{
- struct k210_pll *pll = to_k210_pll(clk);
- u32 reg = readl(pll->reg);
+ const struct k210_pll_params *pll = &k210_plls[id];
+ u32 reg = readl(priv->base + pll->off);
/*
* Bypassing before powering off is important so child clocks don't stop
@@ -549,37 +578,10 @@ static int k210_pll_disable(struct clk *clk)
* of the cpu clock.
*/
reg |= K210_PLL_BYPASS;
- writel(reg, pll->reg);
+ writel(reg, priv->base + pll->off);
reg &= ~K210_PLL_PWRD;
reg &= ~K210_PLL_EN;
- writel(reg, pll->reg);
+ writel(reg, priv->base + pll->off);
return 0;
}
-
-const struct clk_ops k210_pll_ops = {
- .get_rate = k210_pll_get_rate,
-#ifdef CONFIG_CLK_K210_SET_RATE
- .set_rate = k210_pll_set_rate,
-#endif
- .enable = k210_pll_enable,
- .disable = k210_pll_disable,
-};
-
-struct clk *k210_register_pll_struct(const char *name, const char *parent_name,
- struct k210_pll *pll)
-{
- int ret;
- struct clk *clk = &pll->clk;
-
- ret = clk_register(clk, CLK_K210_PLL, name, parent_name);
- if (ret)
- return ERR_PTR(ret);
- return clk;
-}
-
-U_BOOT_DRIVER(k210_pll) = {
- .name = CLK_K210_PLL,
- .id = UCLASS_CLK,
- .ops = &k210_pll_ops,
-};
diff --git a/include/dt-bindings/clock/k210-sysctl.h b/include/dt-bindings/clock/k210-sysctl.h
index fe852bbd92..6b0d5b46f8 100644
--- a/include/dt-bindings/clock/k210-sysctl.h
+++ b/include/dt-bindings/clock/k210-sysctl.h
@@ -1,6 +1,6 @@
/* SPDX-License-Identifier: GPL-2.0+ */
/*
- * Copyright (C) 2019-20 Sean Anderson <seanga2 at gmail.com>
+ * Copyright (C) 2019-21 Sean Anderson <seanga2 at gmail.com>
*/
#ifndef CLOCK_K210_SYSCTL_H
@@ -9,52 +9,50 @@
/*
* Arbitrary identifiers for clocks.
*/
-#define K210_CLK_NONE 0
-#define K210_CLK_IN0_H 1
-#define K210_CLK_PLL0_H 2
-#define K210_CLK_PLL0 3
-#define K210_CLK_PLL1 4
-#define K210_CLK_PLL2 5
-#define K210_CLK_PLL2_H 6
-#define K210_CLK_CPU 7
-#define K210_CLK_SRAM0 8
-#define K210_CLK_SRAM1 9
-#define K210_CLK_APB0 10
-#define K210_CLK_APB1 11
-#define K210_CLK_APB2 12
-#define K210_CLK_ROM 13
-#define K210_CLK_DMA 14
-#define K210_CLK_AI 15
-#define K210_CLK_DVP 16
-#define K210_CLK_FFT 17
-#define K210_CLK_GPIO 18
-#define K210_CLK_SPI0 19
-#define K210_CLK_SPI1 20
-#define K210_CLK_SPI2 21
-#define K210_CLK_SPI3 22
-#define K210_CLK_I2S0 23
-#define K210_CLK_I2S1 24
-#define K210_CLK_I2S2 25
-#define K210_CLK_I2S0_M 26
-#define K210_CLK_I2S1_M 27
-#define K210_CLK_I2S2_M 28
-#define K210_CLK_I2C0 29
-#define K210_CLK_I2C1 30
-#define K210_CLK_I2C2 31
-#define K210_CLK_UART1 32
-#define K210_CLK_UART2 33
-#define K210_CLK_UART3 34
-#define K210_CLK_AES 35
-#define K210_CLK_FPIOA 36
-#define K210_CLK_TIMER0 37
-#define K210_CLK_TIMER1 38
-#define K210_CLK_TIMER2 39
-#define K210_CLK_WDT0 40
-#define K210_CLK_WDT1 41
-#define K210_CLK_SHA 42
-#define K210_CLK_OTP 43
-#define K210_CLK_RTC 44
-#define K210_CLK_ACLK 45
-#define K210_CLK_CLINT 46
+
+#define K210_CLK_PLL0 0
+#define K210_CLK_PLL1 1
+#define K210_CLK_PLL2 2
+#define K210_CLK_CPU 3
+#define K210_CLK_SRAM0 4
+#define K210_CLK_SRAM1 5
+#define K210_CLK_ACLK 6
+#define K210_CLK_CLINT 7
+#define K210_CLK_APB0 8
+#define K210_CLK_APB1 9
+#define K210_CLK_APB2 10
+#define K210_CLK_ROM 11
+#define K210_CLK_DMA 12
+#define K210_CLK_AI 13
+#define K210_CLK_DVP 14
+#define K210_CLK_FFT 15
+#define K210_CLK_GPIO 16
+#define K210_CLK_SPI0 17
+#define K210_CLK_SPI1 18
+#define K210_CLK_SPI2 19
+#define K210_CLK_SPI3 20
+#define K210_CLK_I2S0 21
+#define K210_CLK_I2S1 22
+#define K210_CLK_I2S2 23
+#define K210_CLK_I2S0_M 24
+#define K210_CLK_I2S1_M 25
+#define K210_CLK_I2S2_M 26
+#define K210_CLK_I2C0 27
+#define K210_CLK_I2C1 28
+#define K210_CLK_I2C2 29
+#define K210_CLK_UART1 30
+#define K210_CLK_UART2 31
+#define K210_CLK_UART3 32
+#define K210_CLK_AES 33
+#define K210_CLK_FPIOA 34
+#define K210_CLK_TIMER0 35
+#define K210_CLK_TIMER1 36
+#define K210_CLK_TIMER2 37
+#define K210_CLK_WDT0 38
+#define K210_CLK_WDT1 39
+#define K210_CLK_SHA 40
+#define K210_CLK_OTP 41
+#define K210_CLK_RTC 42
+#define K210_CLK_IN0 43
#endif /* CLOCK_K210_SYSCTL_H */
diff --git a/include/kendryte/pll.h b/include/kendryte/pll.h
index 95b8494f40..16fd5a5b68 100644
--- a/include/kendryte/pll.h
+++ b/include/kendryte/pll.h
@@ -25,16 +25,6 @@
#define K210_PLL_CLEAR_SLIP 2
#define K210_PLL_TEST_OUT 3
-struct k210_pll {
- struct clk clk;
- void __iomem *reg; /* Base PLL register */
- void __iomem *lock; /* Common PLL lock register */
- u8 shift; /* Offset of bits in lock register */
- u8 width; /* Width of lock bits to test against */
-};
-
-#define to_k210_pll(_clk) container_of(_clk, struct k210_pll, clk)
-
struct k210_pll_config {
u8 r;
u8 f;
@@ -51,8 +41,18 @@ TEST_STATIC int k210_pll_calc_config(u32 rate, u32 rate_in,
#endif
-extern const struct clk_ops k210_pll_ops;
+/**
+ * struct k210_clk_priv - K210 clock driver private data
+ * @base: The base address of the sysctl device
+ * @in0: The "in0" external oscillator
+ */
+struct k210_clk_priv {
+ void __iomem *base;
+ struct clk in0;
+};
-struct clk *k210_register_pll_struct(const char *name, const char *parent_name,
- struct k210_pll *pll);
+ulong k210_pll_set_rate(struct k210_clk_priv *priv, int id, ulong rate, ulong rate_in);
+ulong k210_pll_get_rate(struct k210_clk_priv *priv, int id, ulong rate_in);
+int k210_pll_enable(struct k210_clk_priv *priv, int id);
+int k210_pll_disable(struct k210_clk_priv *priv, int id);
#endif /* K210_PLL_H */
--
2.31.0
More information about the U-Boot
mailing list