[PATCH 2/3 v3] efi_loader: Force a sinlge FMP instance per hardware store

[Ilias Apalodimas]

Chapter 23 of the EFI spec (rev 2.9) says:
"A specific updatable hardware firmware store must be represented by
exactly one FMP instance".
This is not the case for us, since both of our FMP protocols can be
installed at the same time because they are controlled by a single
'dfu_alt_info' env variable.
So make the config options depend on each other and allow the user to
install one of them at any given time.  If we fix the meta-data provided
by the 'dfu_alt_info' in the future,  to hint about the capsule type
(fit or raw) we can revise this and enable both FMPs to be installed, as
long as they target different firmware hardware stores

Note that we are not using a Kconfig 'choice' on purpose, since we
want to allow both of those to be installed and tested in sandbox

Signed-off-by: Ilias Apalodimas <ilias.apalodimas at linaro.org>
---
Changes since v2:
-
Changes since v1:
- Don't use 'choice' on Kconfig sicne we need both of the FMPs installed for sandbox testing
  instead just make them mutually exclusive with 'depends on'

 configs/xilinx_zynqmp_virt_defconfig |  1 -
 lib/efi_loader/Kconfig               | 45 ++++++++++++++--------------
 2 files changed, 22 insertions(+), 24 deletions(-)
diff --git a/configs/xilinx_zynqmp_virt_defconfig b/configs/xilinx_zynqmp_virt_defconfig
index 6adbe987cb7f..4d34e6c4cba5 100644
--- a/configs/xilinx_zynqmp_virt_defconfig
+++ b/configs/xilinx_zynqmp_virt_defconfig
@@ -187,5 +187,4 @@ CONFIG_OF_LIBFDT_OVERLAY=y
 CONFIG_EFI_SET_TIME=y
 CONFIG_EFI_RUNTIME_UPDATE_CAPSULE=y
 CONFIG_EFI_CAPSULE_ON_DISK=y
-CONFIG_EFI_CAPSULE_FIRMWARE_FIT=y
 CONFIG_EFI_CAPSULE_FIRMWARE_RAW=y
diff --git a/lib/efi_loader/Kconfig b/lib/efi_loader/Kconfig
index 6242caceb7f9..684adfb62379 100644
--- a/lib/efi_loader/Kconfig
+++ b/lib/efi_loader/Kconfig
@@ -161,6 +161,28 @@ config EFI_CAPSULE_FIRMWARE_MANAGEMENT
 	  Select this option if you want to enable capsule-based
 	  firmware update using Firmware Management Protocol.
 
+config EFI_CAPSULE_FIRMWARE_FIT
+	bool "FMP driver for FIT images"
+	depends on FIT
+	depends on EFI_CAPSULE_FIRMWARE_MANAGEMENT
+	select UPDATE_FIT
+	select DFU
+	select EFI_CAPSULE_FIRMWARE
+	help
+	  Select this option if you want to enable firmware management protocol
+	  driver for FIT image
+
+config EFI_CAPSULE_FIRMWARE_RAW
+	bool "FMP driver for raw images"
+	depends on EFI_CAPSULE_FIRMWARE_MANAGEMENT
+	depends on SANDBOX || (!SANDBOX && !EFI_CAPSULE_FIRMWARE_FIT)
+	select DFU_WRITE_ALT
+	select DFU
+	select EFI_CAPSULE_FIRMWARE
+	help
+	  Select this option if you want to enable firmware management protocol
+	  driver for raw image
+
 config EFI_CAPSULE_AUTHENTICATE
 	bool "Update Capsule authentication"
 	depends on EFI_CAPSULE_FIRMWARE
@@ -181,29 +203,6 @@ config EFI_CAPSULE_AUTHENTICATE
 	  Select this option if you want to enable capsule
 	  authentication
 
-config EFI_CAPSULE_FIRMWARE_FIT
-	bool "FMP driver for FIT image"
-	depends on EFI_CAPSULE_FIRMWARE_MANAGEMENT
-	depends on FIT
-	select UPDATE_FIT
-	select DFU
-	select EFI_CAPSULE_FIRMWARE
-	default n
-	help
-	  Select this option if you want to enable firmware management protocol
-	  driver for FIT image
-
-config EFI_CAPSULE_FIRMWARE_RAW
-	bool "FMP driver for raw image"
-	depends on EFI_CAPSULE_FIRMWARE_MANAGEMENT
-	select DFU
-	select DFU_WRITE_ALT
-	select EFI_CAPSULE_FIRMWARE
-	default n
-	help
-	  Select this option if you want to enable firmware management protocol
-	  driver for raw image
-
 config EFI_DEVICE_PATH_TO_TEXT
 	bool "Device path to text protocol"
 	default y
-- 
2.32.0.rc0