[PATCH u-boot-marvell v2 0/6] Changes for Turris MOX

[Stefan Roese]

On 07.06.21 16:34, Marek Behún wrote:
> Hello Stefan,
> 
> Here are some changes for Turris MOX (v2):
> - dts changes
> - more config options enabled
> - rescue mode support added
> 
> If it is possible, since this touches only our device, we would like
> this to be also merged for v2021.07 (once reviewed by you and Pali).

Done. ;)

Applied to u-boot-marvell/master

Thanks,
Stefan


> Changes since v1:
> - use constant addresses instead of ${kernel_addr_r} and
>    ${ramdisk_addr_r} in bootcmd_rescue, so that this command won't fail
>    if those addresses are changed
> - dropped last patch changing internal-regs node name in dts. We don't
>    need this now, let's do this in the future once we will be aligning
>    U-Boot's DTS with kernel's DTS
> 
> Marek Behún (6):
>    arm: mvebu: dts: turris_mox: add button and LED nodes
>    arm: mvebu: turris_mox: add support for board rescue mode
>    arm: mvebu: turris_mox: start blinking PHY LEDs when entering rescue
>    arm: mvebu: configs: turris_mox: add fdtfile default env variable
>    arm: mvebu: dts: turris_mox: add nodes for SPI NOR partitions
>    arm: mvebu: turris_mox: enable options for Turris network boot
> 
>   arch/arm/dts/armada-3720-turris-mox.dts |  55 ++++++++++++
>   board/CZ.NIC/turris_mox/turris_mox.c    | 106 ++++++++++++++++++++++++
>   configs/turris_mox_defconfig            |  14 ++++
>   include/configs/turris_mox.h            |  10 +++
>   4 files changed, 185 insertions(+)
> 


Viele Grüße,
Stefan

-- 
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-51 Fax: (+49)-8142-66989-80 Email: sr at denx.de