[PATCH 2/2] net: xilinx: axi_emac: Add support for 10G/25G AXI ethernet
Ramon Fried
rfried.dev at gmail.com
Sun Jun 27 22:01:27 CEST 2021
On Thu, Jun 24, 2021 at 9:35 AM Ashok Reddy Soma
<ashok.reddy.soma at xilinx.com> wrote:
>
> Add support for 10G/25G (XXV) high speed ethernet. This Makes use of
> the exiting AXI DMA, similar to 1G.
>
> Signed-off-by: Alessandro Temil <atemil at waymo.com>
> Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma at xilinx.com>
> ---
>
> drivers/net/xilinx_axi_emac.c | 162 +++++++++++++++++++++++++---------
> 1 file changed, 118 insertions(+), 44 deletions(-)
>
> diff --git a/drivers/net/xilinx_axi_emac.c b/drivers/net/xilinx_axi_emac.c
> index cfc6082475..2ec76d0f52 100644
> --- a/drivers/net/xilinx_axi_emac.c
> +++ b/drivers/net/xilinx_axi_emac.c
> @@ -1,5 +1,6 @@
> // SPDX-License-Identifier: GPL-2.0+
> /*
> + * Copyright (C) 2021 Waymo LLC
> * Copyright (C) 2011 Michal Simek <monstr at monstr.eu>
> * Copyright (C) 2011 PetaLogix
> * Copyright (C) 2010 Xilinx, Inc. All rights reserved.
> @@ -73,9 +74,22 @@ DECLARE_GLOBAL_DATA_PTR;
> #define XAXIDMA_BD_CTRL_TXSOF_MASK 0x08000000 /* First tx packet */
> #define XAXIDMA_BD_CTRL_TXEOF_MASK 0x04000000 /* Last tx packet */
>
> -#define DMAALIGN 128
> +/* Bitmasks for XXV Ethernet MAC */
> +#define XXV_TC_TX_MASK 0x00000001
> +#define XXV_TC_FCS_MASK 0x00000002
> +#define XXV_RCW1_RX_MASK 0x00000001
> +#define XXV_RCW1_FCS_MASK 0x00000002
> +
> +#define DMAALIGN 128
> +#define XXV_MIN_PKT_SIZE 60
>
> static u8 rxframe[PKTSIZE_ALIGN] __attribute((aligned(DMAALIGN)));
> +static u8 txminframe[XXV_MIN_PKT_SIZE] __attribute((aligned(DMAALIGN)));
> +
> +enum emac_variant {
> + EMAC_1G = 0,
> + EMAC_10G_25G = 1,
> +};
>
> /* Reflect dma offsets */
> struct axidma_reg {
> @@ -95,6 +109,7 @@ struct axidma_plat {
> int phyaddr;
> u8 eth_hasnobuf;
> int phy_of_handle;
> + enum emac_variant mactype;
> };
>
> /* Private driver structures */
> @@ -108,6 +123,7 @@ struct axidma_priv {
> struct mii_dev *bus;
> u8 eth_hasnobuf;
> int phy_of_handle;
> + enum emac_variant mactype;
> };
>
> /* BD descriptors */
> @@ -154,6 +170,14 @@ struct axi_regs {
> u32 uaw1; /* 0x704: Unicast address word 1 */
> };
>
> +struct xxv_axi_regs {
> + u32 gt_reset; /* 0x0 */
> + u32 reserved[2];
> + u32 tc; /* 0xC: Tx Configuration */
> + u32 reserved2;
> + u32 rcw1; /* 0x14: Rx Configuration Word 1 */
> +};
> +
> /* Use MII register 1 (MII status register) to detect PHY */
> #define PHY_DETECT_REG 1
>
> @@ -385,6 +409,18 @@ static void axiemac_stop(struct udevice *dev)
> debug("axiemac: Halted\n");
> }
>
> +static int xxv_axi_ethernet_init(struct axidma_priv *priv)
> +{
> + struct xxv_axi_regs *regs = (struct xxv_axi_regs *)priv->iobase;
> +
> + writel(readl(®s->rcw1) | XXV_RCW1_FCS_MASK, ®s->rcw1);
> + writel(readl(®s->tc) | XXV_TC_FCS_MASK, ®s->tc);
> + writel(readl(®s->tc) | XXV_TC_TX_MASK, ®s->tc);
> + writel(readl(®s->rcw1) | XXV_RCW1_RX_MASK, ®s->rcw1);
> +
> + return 0;
> +}
> +
> static int axi_ethernet_init(struct axidma_priv *priv)
> {
> struct axi_regs *regs = priv->iobase;
> @@ -440,6 +476,9 @@ static int axiemac_write_hwaddr(struct udevice *dev)
> struct axidma_priv *priv = dev_get_priv(dev);
> struct axi_regs *regs = priv->iobase;
>
> + if (priv->mactype != EMAC_1G)
> + return 0;
> +
> /* Set the MAC address */
> int val = ((pdata->enetaddr[3] << 24) | (pdata->enetaddr[2] << 16) |
> (pdata->enetaddr[1] << 8) | (pdata->enetaddr[0]));
> @@ -477,7 +516,6 @@ static void axi_dma_init(struct axidma_priv *priv)
> static int axiemac_start(struct udevice *dev)
> {
> struct axidma_priv *priv = dev_get_priv(dev);
> - struct axi_regs *regs = priv->iobase;
> u32 temp;
>
> debug("axiemac: Init started\n");
> @@ -490,8 +528,13 @@ static int axiemac_start(struct udevice *dev)
> axi_dma_init(priv);
>
> /* Initialize AxiEthernet hardware. */
> - if (axi_ethernet_init(priv))
> - return -1;
> + if (priv->mactype == EMAC_1G) {
> + if (axi_ethernet_init(priv))
> + return -1;
> + } else {
> + if (xxv_axi_ethernet_init(priv))
> + return -1;
> + }
>
> /* Disable all RX interrupts before RxBD space setup */
> temp = readl(&priv->dmarx->control);
> @@ -525,15 +568,25 @@ static int axiemac_start(struct udevice *dev)
> /* Rx BD is ready - start */
> axienet_dma_write(&rx_bd, &priv->dmarx->tail);
>
> - /* Enable TX */
> - writel(XAE_TC_TX_MASK, ®s->tc);
> - /* Enable RX */
> - writel(XAE_RCW1_RX_MASK, ®s->rcw1);
> + if (priv->mactype == EMAC_1G) {
> + struct axi_regs *regs = priv->iobase;
> + /* Enable TX */
> + writel(XAE_TC_TX_MASK, ®s->tc);
> + /* Enable RX */
> + writel(XAE_RCW1_RX_MASK, ®s->rcw1);
> +
> + /* PHY setup */
> + if (!setup_phy(dev)) {
> + axiemac_stop(dev);
> + return -1;
> + }
> + } else {
> + struct xxv_axi_regs *regs = (struct xxv_axi_regs *)priv->iobase;
> + /* Enable TX */
> + writel(readl(®s->tc) | XXV_TC_TX_MASK, ®s->tc);
>
> - /* PHY setup */
> - if (!setup_phy(dev)) {
> - axiemac_stop(dev);
> - return -1;
> + /* Enable RX */
> + writel(readl(®s->rcw1) | XXV_RCW1_RX_MASK, ®s->rcw1);
> }
>
> debug("axiemac: Init complete\n");
> @@ -548,6 +601,14 @@ static int axiemac_send(struct udevice *dev, void *ptr, int len)
> if (len > PKTSIZE_ALIGN)
> len = PKTSIZE_ALIGN;
>
> + /* If size is less than min packet size, pad to min size */
> + if (priv->mactype == EMAC_10G_25G && len < XXV_MIN_PKT_SIZE) {
> + memset(txminframe, 0, XXV_MIN_PKT_SIZE);
> + memcpy(txminframe, ptr, len);
> + len = XXV_MIN_PKT_SIZE;
> + ptr = txminframe;
> + }
> +
> /* Flush packet to main memory to be trasfered by DMA */
> flush_cache((phys_addr_t)ptr, len);
>
> @@ -632,7 +693,7 @@ static int axiemac_recv(struct udevice *dev, int flags, uchar **packetp)
> temp = readl(&priv->dmarx->control);
> temp &= ~XAXIDMA_IRQ_ALL_MASK;
> writel(temp, &priv->dmarx->control);
> - if (!priv->eth_hasnobuf)
> + if (!priv->eth_hasnobuf && priv->mactype == EMAC_1G)
> length = rx_bd.app4 & 0xFFFF; /* max length mask */
> else
> length = rx_bd.status & XAXIDMA_BD_STS_ACTUAL_LEN_MASK;
> @@ -709,21 +770,25 @@ static int axi_emac_probe(struct udevice *dev)
> priv->dmatx = plat->dmatx;
> /* RX channel offset is 0x30 */
> priv->dmarx = (struct axidma_reg *)((phys_addr_t)priv->dmatx + 0x30);
> - priv->eth_hasnobuf = plat->eth_hasnobuf;
> - priv->phyaddr = plat->phyaddr;
> - priv->phy_of_handle = plat->phy_of_handle;
> - priv->interface = pdata->phy_interface;
> + priv->mactype = plat->mactype;
> +
> + if (priv->mactype == EMAC_1G) {
> + priv->eth_hasnobuf = plat->eth_hasnobuf;
> + priv->phyaddr = plat->phyaddr;
> + priv->phy_of_handle = plat->phy_of_handle;
> + priv->interface = pdata->phy_interface;
>
> - priv->bus = mdio_alloc();
> - priv->bus->read = axiemac_miiphy_read;
> - priv->bus->write = axiemac_miiphy_write;
> - priv->bus->priv = priv;
> + priv->bus = mdio_alloc();
> + priv->bus->read = axiemac_miiphy_read;
> + priv->bus->write = axiemac_miiphy_write;
> + priv->bus->priv = priv;
>
> - ret = mdio_register_seq(priv->bus, dev_seq(dev));
> - if (ret)
> - return ret;
> + ret = mdio_register_seq(priv->bus, dev_seq(dev));
> + if (ret)
> + return ret;
>
> - axiemac_phy_init(dev);
> + axiemac_phy_init(dev);
> + }
>
> return 0;
> }
> @@ -732,9 +797,11 @@ static int axi_emac_remove(struct udevice *dev)
> {
> struct axidma_priv *priv = dev_get_priv(dev);
>
> - free(priv->phydev);
> - mdio_unregister(priv->bus);
> - mdio_free(priv->bus);
> + if (priv->mactype == EMAC_1G) {
> + free(priv->phydev);
> + mdio_unregister(priv->bus);
> + mdio_free(priv->bus);
> + }
>
> return 0;
> }
> @@ -757,6 +824,7 @@ static int axi_emac_of_to_plat(struct udevice *dev)
> const char *phy_mode;
>
> pdata->iobase = dev_read_addr(dev);
> + plat->mactype = dev_get_driver_data(dev);
>
> offset = fdtdec_lookup_phandle(gd->fdt_blob, node,
> "axistream-connected");
> @@ -771,24 +839,29 @@ static int axi_emac_of_to_plat(struct udevice *dev)
> return -EINVAL;
> }
>
> - plat->phyaddr = -1;
> + if (plat->mactype == EMAC_1G) {
> + plat->phyaddr = -1;
>
> - offset = fdtdec_lookup_phandle(gd->fdt_blob, node, "phy-handle");
> - if (offset > 0) {
> - plat->phyaddr = fdtdec_get_int(gd->fdt_blob, offset, "reg", -1);
> - plat->phy_of_handle = offset;
> - }
> + offset = fdtdec_lookup_phandle(gd->fdt_blob, node,
> + "phy-handle");
> + if (offset > 0) {
> + plat->phyaddr = fdtdec_get_int(gd->fdt_blob, offset,
> + "reg", -1);
> + plat->phy_of_handle = offset;
> + }
>
> - phy_mode = fdt_getprop(gd->fdt_blob, node, "phy-mode", NULL);
> - if (phy_mode)
> - pdata->phy_interface = phy_get_interface_by_name(phy_mode);
> - if (pdata->phy_interface == -1) {
> - printf("%s: Invalid PHY interface '%s'\n", __func__, phy_mode);
> - return -EINVAL;
> - }
> + phy_mode = fdt_getprop(gd->fdt_blob, node, "phy-mode", NULL);
> + if (phy_mode)
> + pdata->phy_interface = phy_get_interface_by_name(phy_mode);
> + if (pdata->phy_interface == -1) {
> + printf("%s: Invalid PHY interface '%s'\n", __func__,
> + phy_mode);
> + return -EINVAL;
> + }
>
> - plat->eth_hasnobuf = fdtdec_get_bool(gd->fdt_blob, node,
> - "xlnx,eth-hasnobuf");
> + plat->eth_hasnobuf = fdtdec_get_bool(gd->fdt_blob, node,
> + "xlnx,eth-hasnobuf");
> + }
>
> printf("AXI EMAC: %lx, phyaddr %d, interface %s\n", (ulong)pdata->iobase,
> plat->phyaddr, phy_string_for_interface(pdata->phy_interface));
> @@ -797,7 +870,8 @@ static int axi_emac_of_to_plat(struct udevice *dev)
> }
>
> static const struct udevice_id axi_emac_ids[] = {
> - { .compatible = "xlnx,axi-ethernet-1.00.a" },
> + { .compatible = "xlnx,axi-ethernet-1.00.a", .data = (uintptr_t)EMAC_1G },
> + { .compatible = "xlnx,xxv-ethernet-1.0", .data = (uintptr_t)EMAC_10G_25G },
> { }
> };
>
> --
> 2.17.1
>
Reviewed-by: Ramon Fried <rfried.dev at gmail.com>
More information about the U-Boot
mailing list