[PATCH] efi_loader: allow to disable GOP support

[Peter Robinson]

On Wed, Jun 16, 2021 at 1:20 PM Icenowy Zheng <icenowy at aosc.io> wrote:
>
> 在 2021-06-16星期三的 06:59 +0200，Heinrich Schuchardt写道：
> > Am 15. Juni 2021 23:10:28 MESZ schrieb Icenowy Zheng
> > <icenowy at aosc.io>:
> > > Sometimes EFI GOP support may be not wanted (e.g. because the
> > > operating
> > > system cannot operate well with it) even if video support in U-Boot
> > > is
> > > needed.
> >
> > Which OS has which problem?
> > Why don't you fix the OS?
>
> I'm trying RK3399 with Linux. EFIFB never works as intended (maybe it's
> because IOMMU is reconfigured), and rockchipdrmfb will be fb1 (leave
> non-working EFIFB as fb0), makes fbcon unusable.

It's due to bugs in Linux, it will be fixed in 5.14 with these patches
from our Fedora testing:
https://lists.freedesktop.org/archives/dri-devel/2021-May/306803.html

There's also this enhancement, also should land in 5.14, which is
dependent on the feature that's in the second link:

https://lists.freedesktop.org/archives/dri-devel/2021-May/306803.html
https://lists.freedesktop.org/archives/dri-devel/2021-April/303291.html

With that first patch it mostly works for me, the second two series
improves on that some more.

Peter

> The second problem has a proposed fix, but the first problem is
> mystery.
>
> >
> > Best regards
> >
> > Heinrich
> >
> >
> > >
> > > Allow to disable EFI GOP support with a Kconfig option.
> > >
> > > Signed-off-by: Icenowy Zheng <icenowy at aosc.io>
> > > ---
> > > lib/efi_loader/Kconfig     |  8 ++++++++
> > > lib/efi_loader/Makefile    |  3 +--
> > > lib/efi_loader/efi_setup.c | 11 ++++++-----
> > > 3 files changed, 15 insertions(+), 7 deletions(-)
> > >
> > > diff --git a/lib/efi_loader/Kconfig b/lib/efi_loader/Kconfig
> > > index 6242caceb7..5ba0ce6a44 100644
> > > --- a/lib/efi_loader/Kconfig
> > > +++ b/lib/efi_loader/Kconfig
> > > @@ -282,6 +282,14 @@ config EFI_HAVE_RUNTIME_RESET
> > >         depends on ARCH_BCM283X || FSL_LAYERSCAPE || PSCI_RESET ||
> > > \
> > >                    SANDBOX || SYSRESET_X86
> > >
> > > +config EFI_GOP_PROTOCOL
> > > +       bool "EFI_GOP_PROTOCOL support"
> > > +       default y
> > > +       depends on DM_VIDEO || LCD
> > > +       help
> > > +         Provide a EFI_GOP_PROTOCOL implementation using the
> > > graphics
> > > +         hardware initialized by U-Boot.
> > > +
> > > config EFI_GRUB_ARM32_WORKAROUND
> > >         bool "Workaround for GRUB on 32bit ARM"
> > >         default n if ARCH_BCM283X || ARCH_SUNXI || ARCH_QEMU
> > > diff --git a/lib/efi_loader/Makefile b/lib/efi_loader/Makefile
> > > index fd344cea29..826563d9a7 100644
> > > --- a/lib/efi_loader/Makefile
> > > +++ b/lib/efi_loader/Makefile
> > > @@ -54,8 +54,7 @@ obj-$(CONFIG_EFI_VARIABLES_PRESEED) +=
> > > efi_var_seed.o
> > > endif
> > > obj-y += efi_watchdog.o
> > > obj-$(CONFIG_EFI_ESRT) += efi_esrt.o
> > > -obj-$(CONFIG_LCD) += efi_gop.o
> > > -obj-$(CONFIG_DM_VIDEO) += efi_gop.o
> > > +obj-$(CONFIG_EFI_GOP_PROTOCOL) += efi_gop.o
> > > obj-$(CONFIG_PARTITIONS) += efi_disk.o
> > > obj-$(CONFIG_NET) += efi_net.o
> > > obj-$(CONFIG_GENERATE_ACPI_TABLE) += efi_acpi.o
> > > diff --git a/lib/efi_loader/efi_setup.c
> > > b/lib/efi_loader/efi_setup.c
> > > index 3c5cf9a435..98deb63777 100644
> > > --- a/lib/efi_loader/efi_setup.c
> > > +++ b/lib/efi_loader/efi_setup.c
> > > @@ -254,11 +254,12 @@ efi_status_t efi_init_obj_list(void)
> > >         if (ret != EFI_SUCCESS)
> > >                 goto out;
> > >
> > > -#if defined(CONFIG_LCD) || defined(CONFIG_DM_VIDEO)
> > > -       ret = efi_gop_register();
> > > -       if (ret != EFI_SUCCESS)
> > > -               goto out;
> > > -#endif
> > > +       if (IS_ENABLED(CONFIG_EFI_GOP_PROTOCOL)) {
> > > +               ret = efi_gop_register();
> > > +               if (ret != EFI_SUCCESS)
> > > +                       goto out;
> > > +       }
> > > +
> > > #ifdef CONFIG_NET
> > >         ret = efi_net_register();
> > >         if (ret != EFI_SUCCESS)
>