[PATCH] net: e1000: do not attempt to set hwaddr for i210 without FLASH

Tim Harvey tharvey at gateworks.com
Fri Jun 11 18:01:18 CEST 2021


On Thu, Apr 22, 2021 at 5:11 PM Ramon Fried <rfried.dev at gmail.com> wrote:
>
> On Fri, Apr 16, 2021 at 11:25 PM Tim Harvey <tharvey at gateworks.com> wrote:
> >
> > commit f1bcad22dd19 ("net: e1000: add support for writing to EEPROM")
> > adds support for storing hwaddr in EEPROM however i210 devices do not
> > support this and thus results in errors such as:
> > Warning: e1000#0 failed to set MAC address'
> >
> > Check if a flash device is present and if not return -ENOSYS indicating
> > this is not supported.
> >
> > Signed-off-by: Tim Harvey <tharvey at gateworks.com>
> > ---
> >  drivers/net/e1000.c | 4 ++++
> >  drivers/net/e1000.h | 1 +
> >  2 files changed, 5 insertions(+)
> >
> > diff --git a/drivers/net/e1000.c b/drivers/net/e1000.c
> > index 694114eca7..60613b7df0 100644
> > --- a/drivers/net/e1000.c
> > +++ b/drivers/net/e1000.c
> > @@ -5673,6 +5673,10 @@ static int e1000_write_hwaddr(struct eth_device *dev)
> >
> >         DEBUGOUT("%s: mac=%pM\n", __func__, mac);
> >
> > +       if ((hw->eeprom.type == e1000_eeprom_invm) &&
> > +           !(E1000_READ_REG(hw, EECD) & E1000_EECD_FLASH_DETECTED_I210))
> > +               return -ENOSYS;
> > +
> >         memset(current_mac, 0, 6);
> >
> >         /* Read from EEPROM, not from registers, to make sure
> > diff --git a/drivers/net/e1000.h b/drivers/net/e1000.h
> > index 072851ba31..082154a997 100644
> > --- a/drivers/net/e1000.h
> > +++ b/drivers/net/e1000.h
> > @@ -1245,6 +1245,7 @@ struct e1000_hw {
> >  #define E1000_EECD_FLUPD     0x00080000 /* Update FLASH */
> >  #define E1000_EECD_FLUPD_I210       0x00800000 /* Update FLASH */
> >  #define E1000_EECD_FLUDONE_I210     0x04000000 /* Update FLASH done*/
> > +#define E1000_EECD_FLASH_DETECTED_I210 0x00080000 /* FLASH detected */
> >  #define E1000_FLUDONE_ATTEMPTS      20000
> >  #define E1000_EECD_AUPDEN    0x00100000 /* Enable Autonomous FLASH update */
> >  #define E1000_EECD_SHADV     0x00200000 /* Shadow RAM Data Valid */
> > --
> > 2.17.1
> >
> Reviewed-by: Ramon Fried <rfried.dev at gmail.com>

Joe / Ramon,

Can one of you pick this up? If I need to re-submit with Ramon's
'reviewed by' please let me know.

Best regards,

Tim


More information about the U-Boot mailing list