[PATCH v6 2/2] dt-bindings: add xilinx clocking wizard bindings

[Zhengxun Li]

Hi,

Michal Simek <michal.simek at xilinx.com> 於 2021年6月16日 週三 上午10:05寫道：
>
> Hi,
>
> On 6/16/21 5:26 PM, Zhengxun Li wrote:
> > Hi Sean,
> >
> > Thank you for your reply.
> >
> > Sean Anderson <sean.anderson at seco.com> 於 2021年6月15日 週二 下午2:52寫道：
> >>
> >>
> >>
> >> On 6/15/21 1:21 PM, Zhengxun Li wrote:
> >>  > Hi Michal,
> >>  >
> >>  > Sean Anderson <sean.anderson at seco.com> 於 2021年6月11日 週五 下午3:07寫道：
> >>  >>
> >>  >>
> >>  >>
> >>  >> On 6/11/21 11:10 AM, Zhengxun wrote:
> >>  >>   > Add the devicetree binding for the xilinx clocking wizard.
> >>  >>   >
> >>  >>   > Signed-off-by: Zhengxun <zhengxunli.mxic at gmail.com>
> >>  >>   > ---
> >>  >>   >   .../clock/xlnx,clocking-wizard.txt            | 43 +++++++++++++++++++
> >>  >>   >   1 file changed, 43 insertions(+)
> >>  >>   >   create mode 100644 doc/device-tree-bindings/clock/xlnx,clocking-wizard.txt
> >>  >>
> >>  >> Should this be .yml? In general, I believe we only need to document
> >>  >> bindings in U-Boot if they differ from Linux. In Linux, I see that
> >>  >> Documentation/devicetree/bindings/clock/xlnx,clocking-wizard.txt exists.
> >>
> >> Because the binding is documented in Linux, we do not need to document
> >> it in U-Boot.
> >>
> >>  >> Will you be upstreaming this conversion to yaml?
> >>
> >> This patch documents the binding in yaml. However, the version in Linux
> >> is in old-style txt. Will you be sending a patch to Linux to convert
> >> this binding to yaml?
> >
> > In linux, I saw Shubhrajyoti Datta do this, although it has not been
> > accepted yet. The link is below.
> >
> > https://patchwork.kernel.org/project/linux-clk/patch/1617886723-27117-2-git-send-email-shubhrajyoti.datta@xilinx.com/
> >
> > Should I do this again?
>
> I prefer not to do it. Linux binding will be reviewed by Rob and that
> should be enough.

Thank you for your reply.

Thanks,
Zhengxun