[v3 01/17] arm: socfpga: Move linux_qspi_enable from bootcommand to board_prep_linux function
Siew Chin Lim
elly.siew.chin.lim at intel.com
Sun Jun 13 10:48:36 CEST 2021
Move 'linux_qspi_enable' from bootcommand to board_prep_linux function when
OS booted from FIT image for Stratix 10 and Agilex. This flow is common for
all Intel SOC64 devices.
U-Boot will update 'fdt_addr' environment value based on FIT image in
board_prep_linux function, and 'linux_qspi_enable' will refer to 'fdt_addr'
environment value to retrieve the device tree node.
Signed-off-by: Siew Chin Lim <elly.siew.chin.lim at intel.com>
---
arch/arm/mach-socfpga/board.c | 17 +++++++++--------
configs/socfpga_agilex_atf_defconfig | 2 +-
configs/socfpga_stratix10_atf_defconfig | 2 +-
3 files changed, 11 insertions(+), 10 deletions(-)
diff --git a/arch/arm/mach-socfpga/board.c b/arch/arm/mach-socfpga/board.c
index 650122fcd4..f5a3f2ad62 100644
--- a/arch/arm/mach-socfpga/board.c
+++ b/arch/arm/mach-socfpga/board.c
@@ -115,17 +115,18 @@ void board_fit_image_post_process(void **p_image, size_t *p_size)
#if !IS_ENABLED(CONFIG_SPL_BUILD) && IS_ENABLED(CONFIG_FIT)
void board_prep_linux(bootm_headers_t *images)
{
- if (IS_ENABLED(CONFIG_SOCFPGA_SECURE_VAB_AUTH) &&
- !IS_ENABLED(CONFIG_SOCFPGA_SECURE_VAB_AUTH_ALLOW_NON_FIT_IMAGE)) {
- /*
- * Ensure the OS is always booted from FIT and with
- * VAB signed certificate
- */
- if (!images->fit_uname_cfg) {
+ if (!images->fit_uname_cfg) {
+ if (IS_ENABLED(CONFIG_SOCFPGA_SECURE_VAB_AUTH) &&
+ !IS_ENABLED(CONFIG_SOCFPGA_SECURE_VAB_AUTH_ALLOW_NON_FIT_IMAGE)) {
+ /*
+ * Ensure the OS is always booted from FIT and with
+ * VAB signed certificate
+ */
printf("Please use FIT with VAB signed images!\n");
hang();
}
-
+ } else {
+ /* Update fdt_addr in enviroment variable */
env_set_hex("fdt_addr", (ulong)images->ft_addr);
debug("images->ft_addr = 0x%08lx\n", (ulong)images->ft_addr);
}
diff --git a/configs/socfpga_agilex_atf_defconfig b/configs/socfpga_agilex_atf_defconfig
index 29e3fb865e..a4b9c23919 100644
--- a/configs/socfpga_agilex_atf_defconfig
+++ b/configs/socfpga_agilex_atf_defconfig
@@ -22,7 +22,7 @@ CONFIG_BOOTDELAY=5
CONFIG_USE_BOOTARGS=y
CONFIG_BOOTARGS="earlycon"
CONFIG_USE_BOOTCOMMAND=y
-CONFIG_BOOTCOMMAND="run fatscript; run mmcfitload; run linux_qspi_enable; run mmcfitboot"
+CONFIG_BOOTCOMMAND="run fatscript; run mmcfitload; run mmcfitboot"
CONFIG_SPL_CRC32_SUPPORT=y
CONFIG_SPL_CACHE=y
CONFIG_SPL_SPI_LOAD=y
diff --git a/configs/socfpga_stratix10_atf_defconfig b/configs/socfpga_stratix10_atf_defconfig
index 9f2f220c3a..3a05d4f486 100644
--- a/configs/socfpga_stratix10_atf_defconfig
+++ b/configs/socfpga_stratix10_atf_defconfig
@@ -22,7 +22,7 @@ CONFIG_BOOTDELAY=5
CONFIG_USE_BOOTARGS=y
CONFIG_BOOTARGS="earlycon"
CONFIG_USE_BOOTCOMMAND=y
-CONFIG_BOOTCOMMAND="run fatscript; run mmcfitload; run linux_qspi_enable; run mmcfitboot"
+CONFIG_BOOTCOMMAND="run fatscript; run mmcfitload; run mmcfitboot"
CONFIG_SPL_CRC32_SUPPORT=y
CONFIG_SPL_SPI_LOAD=y
CONFIG_SPL_ATF=y
--
2.19.0
More information about the U-Boot
mailing list