[PATCH v2 1/6] arm: dts: ls1028a: enable the switch CPU port for the LS1028A-QDS

[Vladimir Oltean]

Due to an upstream change, the ls1028a.dtsi bindings for the mscc_felix
switch got accepted with all ports disabled by default and with no link
to the DSA master - this needs to be done on a per board basis.

Note that enetc-2 is not currently disabled in the ls1028a.dtsi, but
presumably at some point it might become. Explicitly enable it in the
QDS device trees anyway, to proactively avoid issues when that happens.

Fixes: a7fdac7e2a2a ("arm: dts: ls1028a: define QDS networking protocol combinations")
Signed-off-by: Vladimir Oltean <vladimir.oltean at nxp.com>
---
v1->v2: none

 arch/arm/dts/fsl-ls1028a-qds-7777-sch-30841.dtsi      | 9 +++++++++
 arch/arm/dts/fsl-ls1028a-qds-7xx7-sch-30841R.dtsi     | 9 +++++++++
 arch/arm/dts/fsl-ls1028a-qds-9999-sch-24801-LBRW.dtsi | 9 +++++++++
 arch/arm/dts/fsl-ls1028a-qds-9999-sch-24801.dtsi      | 9 +++++++++
 arch/arm/dts/fsl-ls1028a-qds-x3xx-sch-30841-LBRW.dtsi | 9 +++++++++
 arch/arm/dts/fsl-ls1028a-qds-x5xx-sch-28021-LBRW.dtsi | 9 +++++++++
 arch/arm/dts/fsl-ls1028a-qds-x7xx-sch-30842.dtsi      | 9 +++++++++
 arch/arm/dts/fsl-ls1028a-qds-xx7x-sch-30842.dtsi      | 9 +++++++++
 8 files changed, 72 insertions(+)

diff --git a/arch/arm/dts/fsl-ls1028a-qds-7777-sch-30841.dtsi b/arch/arm/dts/fsl-ls1028a-qds-7777-sch-30841.dtsi
index fb1836a8aef3..5a0f060c16e5 100644
--- a/arch/arm/dts/fsl-ls1028a-qds-7777-sch-30841.dtsi
+++ b/arch/arm/dts/fsl-ls1028a-qds-7777-sch-30841.dtsi
@@ -20,6 +20,10 @@
 #include "fsl-sch-30841.dtsi"
 };
 
+&enetc2 {
+	status = "okay";
+};
+
 &mscc_felix {
 	status = "okay";
 };
@@ -47,3 +51,8 @@
 	phy-mode = "sgmii-2500";
 	phy-handle = <&{/i2c at 2000000/fpga at 66/mux-mdio at 54/mdio at 40/phy at 03}>;
 };
+
+&mscc_felix_port4 {
+	ethernet = <&enetc2>;
+	status = "okay";
+};
diff --git a/arch/arm/dts/fsl-ls1028a-qds-7xx7-sch-30841R.dtsi b/arch/arm/dts/fsl-ls1028a-qds-7xx7-sch-30841R.dtsi
index 1d02a3e11def..39a83e10c4ce 100644
--- a/arch/arm/dts/fsl-ls1028a-qds-7xx7-sch-30841R.dtsi
+++ b/arch/arm/dts/fsl-ls1028a-qds-7xx7-sch-30841R.dtsi
@@ -9,6 +9,10 @@
 #include "fsl-sch-30841.dtsi"
 };
 
+&enetc2 {
+	status = "okay";
+};
+
 &mscc_felix {
 	status = "okay";
 };
@@ -24,3 +28,8 @@
 	phy-mode = "sgmii-2500";
 	phy-handle = <&{/i2c at 2000000/fpga at 66/mux-mdio at 54/mdio at 40/phy at 03}>;
 };
+
+&mscc_felix_port4 {
+	ethernet = <&enetc2>;
+	status = "okay";
+};
diff --git a/arch/arm/dts/fsl-ls1028a-qds-9999-sch-24801-LBRW.dtsi b/arch/arm/dts/fsl-ls1028a-qds-9999-sch-24801-LBRW.dtsi
index c92dd1bd2e95..021fe3fbc67a 100644
--- a/arch/arm/dts/fsl-ls1028a-qds-9999-sch-24801-LBRW.dtsi
+++ b/arch/arm/dts/fsl-ls1028a-qds-9999-sch-24801-LBRW.dtsi
@@ -34,6 +34,10 @@
 	#include "fsl-sch-24801.dtsi"
 };
 
+&enetc2 {
+	status = "okay";
+};
+
 &mscc_felix {
 	status = "okay";
 };
@@ -61,3 +65,8 @@
 	phy-mode = "sgmii";
 	phy-handle = <&{/i2c at 2000000/fpga at 66/mux-mdio at 54/mdio at 40/phy at 1f}>;
 };
+
+&mscc_felix_port4 {
+	ethernet = <&enetc2>;
+	status = "okay";
+};
diff --git a/arch/arm/dts/fsl-ls1028a-qds-9999-sch-24801.dtsi b/arch/arm/dts/fsl-ls1028a-qds-9999-sch-24801.dtsi
index 941f7472eb09..b6704d8089a8 100644
--- a/arch/arm/dts/fsl-ls1028a-qds-9999-sch-24801.dtsi
+++ b/arch/arm/dts/fsl-ls1028a-qds-9999-sch-24801.dtsi
@@ -19,6 +19,10 @@
 	#include "fsl-sch-24801.dtsi"
 };
 
+&enetc2 {
+	status = "okay";
+};
+
 &mscc_felix {
 	status = "okay";
 };
@@ -46,3 +50,8 @@
 	phy-mode = "sgmii";
 	phy-handle = <&{/i2c at 2000000/fpga at 66/mux-mdio at 54/mdio at 40/phy at 1f}>;
 };
+
+&mscc_felix_port4 {
+	ethernet = <&enetc2>;
+	status = "okay";
+};
diff --git a/arch/arm/dts/fsl-ls1028a-qds-x3xx-sch-30841-LBRW.dtsi b/arch/arm/dts/fsl-ls1028a-qds-x3xx-sch-30841-LBRW.dtsi
index 7e483e656e28..8c10897e565c 100644
--- a/arch/arm/dts/fsl-ls1028a-qds-x3xx-sch-30841-LBRW.dtsi
+++ b/arch/arm/dts/fsl-ls1028a-qds-x3xx-sch-30841-LBRW.dtsi
@@ -19,6 +19,10 @@
 #include "fsl-sch-30841.dtsi"
 };
 
+&enetc2 {
+	status = "okay";
+};
+
 &mscc_felix {
 	status = "okay";
 };
@@ -46,3 +50,8 @@
 	phy-mode = "usxgmii";
 	phy-handle = <&{/i2c at 2000000/fpga at 66/mux-mdio at 54/mdio at 50/phy at 03}>;
 };
+
+&mscc_felix_port4 {
+	ethernet = <&enetc2>;
+	status = "okay";
+};
diff --git a/arch/arm/dts/fsl-ls1028a-qds-x5xx-sch-28021-LBRW.dtsi b/arch/arm/dts/fsl-ls1028a-qds-x5xx-sch-28021-LBRW.dtsi
index 49fffdb9cb2a..1d800dacef89 100644
--- a/arch/arm/dts/fsl-ls1028a-qds-x5xx-sch-28021-LBRW.dtsi
+++ b/arch/arm/dts/fsl-ls1028a-qds-x5xx-sch-28021-LBRW.dtsi
@@ -13,6 +13,10 @@
 	#include "fsl-sch-28021.dtsi"
 };
 
+&enetc2 {
+	status = "okay";
+};
+
 &mscc_felix {
 	status = "okay";
 };
@@ -40,3 +44,8 @@
 	phy-mode = "qsgmii";
 	phy-handle = <&{/i2c at 2000000/fpga at 66/mux-mdio at 54/mdio at 50/phy at 0b}>;
 };
+
+&mscc_felix_port4 {
+	ethernet = <&enetc2>;
+	status = "okay";
+};
diff --git a/arch/arm/dts/fsl-ls1028a-qds-x7xx-sch-30842.dtsi b/arch/arm/dts/fsl-ls1028a-qds-x7xx-sch-30842.dtsi
index 8347462f4cb0..1fb2cdf0c244 100644
--- a/arch/arm/dts/fsl-ls1028a-qds-x7xx-sch-30842.dtsi
+++ b/arch/arm/dts/fsl-ls1028a-qds-x7xx-sch-30842.dtsi
@@ -9,6 +9,10 @@
 #include "fsl-sch-30842.dtsi"
 };
 
+&enetc2 {
+	status = "okay";
+};
+
 &mscc_felix {
 	status = "okay";
 };
@@ -18,3 +22,8 @@
 	phy-mode = "sgmii-2500";
 	phy-handle = <&{/i2c at 2000000/fpga at 66/mux-mdio at 54/mdio at 50/phy at 02}>;
 };
+
+&mscc_felix_port4 {
+	ethernet = <&enetc2>;
+	status = "okay";
+};
diff --git a/arch/arm/dts/fsl-ls1028a-qds-xx7x-sch-30842.dtsi b/arch/arm/dts/fsl-ls1028a-qds-xx7x-sch-30842.dtsi
index 6be3b5094c81..2333f74e5ae1 100644
--- a/arch/arm/dts/fsl-ls1028a-qds-xx7x-sch-30842.dtsi
+++ b/arch/arm/dts/fsl-ls1028a-qds-xx7x-sch-30842.dtsi
@@ -9,6 +9,10 @@
 #include "fsl-sch-30842.dtsi"
 };
 
+&enetc2 {
+	status = "okay";
+};
+
 &mscc_felix {
 	status = "okay";
 };
@@ -18,3 +22,8 @@
 	phy-mode = "sgmii-2500";
 	phy-handle = <&{/i2c at 2000000/fpga at 66/mux-mdio at 54/mdio at 60/phy at 02}>;
 };
+
+&mscc_felix_port4 {
+	ethernet = <&enetc2>;
+	status = "okay";
+};
-- 
2.25.1