[PATCH v2 1/6] arm: dts: ls1028a: enable the switch CPU port for the LS1028A-QDS

[Ramon Fried]

On Fri, Jun 18, 2021 at 1:26 AM Vladimir Oltean <vladimir.oltean at nxp.com> wrote:
>
> Due to an upstream change, the ls1028a.dtsi bindings for the mscc_felix
> switch got accepted with all ports disabled by default and with no link
> to the DSA master - this needs to be done on a per board basis.
>
> Note that enetc-2 is not currently disabled in the ls1028a.dtsi, but
> presumably at some point it might become. Explicitly enable it in the
> QDS device trees anyway, to proactively avoid issues when that happens.
>
> Fixes: a7fdac7e2a2a ("arm: dts: ls1028a: define QDS networking protocol combinations")
> Signed-off-by: Vladimir Oltean <vladimir.oltean at nxp.com>
> ---
> v1->v2: none
>
>  arch/arm/dts/fsl-ls1028a-qds-7777-sch-30841.dtsi      | 9 +++++++++
>  arch/arm/dts/fsl-ls1028a-qds-7xx7-sch-30841R.dtsi     | 9 +++++++++
>  arch/arm/dts/fsl-ls1028a-qds-9999-sch-24801-LBRW.dtsi | 9 +++++++++
>  arch/arm/dts/fsl-ls1028a-qds-9999-sch-24801.dtsi      | 9 +++++++++
>  arch/arm/dts/fsl-ls1028a-qds-x3xx-sch-30841-LBRW.dtsi | 9 +++++++++
>  arch/arm/dts/fsl-ls1028a-qds-x5xx-sch-28021-LBRW.dtsi | 9 +++++++++
>  arch/arm/dts/fsl-ls1028a-qds-x7xx-sch-30842.dtsi      | 9 +++++++++
>  arch/arm/dts/fsl-ls1028a-qds-xx7x-sch-30842.dtsi      | 9 +++++++++
>  8 files changed, 72 insertions(+)
>
> diff --git a/arch/arm/dts/fsl-ls1028a-qds-7777-sch-30841.dtsi b/arch/arm/dts/fsl-ls1028a-qds-7777-sch-30841.dtsi
> index fb1836a8aef3..5a0f060c16e5 100644
> --- a/arch/arm/dts/fsl-ls1028a-qds-7777-sch-30841.dtsi
> +++ b/arch/arm/dts/fsl-ls1028a-qds-7777-sch-30841.dtsi
> @@ -20,6 +20,10 @@
>  #include "fsl-sch-30841.dtsi"
>  };
>
> +&enetc2 {
> +       status = "okay";
> +};
> +
>  &mscc_felix {
>         status = "okay";
>  };
> @@ -47,3 +51,8 @@
>         phy-mode = "sgmii-2500";
>         phy-handle = <&{/i2c at 2000000/fpga at 66/mux-mdio at 54/mdio at 40/phy at 03}>;
>  };
> +
> +&mscc_felix_port4 {
> +       ethernet = <&enetc2>;
> +       status = "okay";
> +};
> diff --git a/arch/arm/dts/fsl-ls1028a-qds-7xx7-sch-30841R.dtsi b/arch/arm/dts/fsl-ls1028a-qds-7xx7-sch-30841R.dtsi
> index 1d02a3e11def..39a83e10c4ce 100644
> --- a/arch/arm/dts/fsl-ls1028a-qds-7xx7-sch-30841R.dtsi
> +++ b/arch/arm/dts/fsl-ls1028a-qds-7xx7-sch-30841R.dtsi
> @@ -9,6 +9,10 @@
>  #include "fsl-sch-30841.dtsi"
>  };
>
> +&enetc2 {
> +       status = "okay";
> +};
> +
>  &mscc_felix {
>         status = "okay";
>  };
> @@ -24,3 +28,8 @@
>         phy-mode = "sgmii-2500";
>         phy-handle = <&{/i2c at 2000000/fpga at 66/mux-mdio at 54/mdio at 40/phy at 03}>;
>  };
> +
> +&mscc_felix_port4 {
> +       ethernet = <&enetc2>;
> +       status = "okay";
> +};
> diff --git a/arch/arm/dts/fsl-ls1028a-qds-9999-sch-24801-LBRW.dtsi b/arch/arm/dts/fsl-ls1028a-qds-9999-sch-24801-LBRW.dtsi
> index c92dd1bd2e95..021fe3fbc67a 100644
> --- a/arch/arm/dts/fsl-ls1028a-qds-9999-sch-24801-LBRW.dtsi
> +++ b/arch/arm/dts/fsl-ls1028a-qds-9999-sch-24801-LBRW.dtsi
> @@ -34,6 +34,10 @@
>         #include "fsl-sch-24801.dtsi"
>  };
>
> +&enetc2 {
> +       status = "okay";
> +};
> +
>  &mscc_felix {
>         status = "okay";
>  };
> @@ -61,3 +65,8 @@
>         phy-mode = "sgmii";
>         phy-handle = <&{/i2c at 2000000/fpga at 66/mux-mdio at 54/mdio at 40/phy at 1f}>;
>  };
> +
> +&mscc_felix_port4 {
> +       ethernet = <&enetc2>;
> +       status = "okay";
> +};
> diff --git a/arch/arm/dts/fsl-ls1028a-qds-9999-sch-24801.dtsi b/arch/arm/dts/fsl-ls1028a-qds-9999-sch-24801.dtsi
> index 941f7472eb09..b6704d8089a8 100644
> --- a/arch/arm/dts/fsl-ls1028a-qds-9999-sch-24801.dtsi
> +++ b/arch/arm/dts/fsl-ls1028a-qds-9999-sch-24801.dtsi
> @@ -19,6 +19,10 @@
>         #include "fsl-sch-24801.dtsi"
>  };
>
> +&enetc2 {
> +       status = "okay";
> +};
> +
>  &mscc_felix {
>         status = "okay";
>  };
> @@ -46,3 +50,8 @@
>         phy-mode = "sgmii";
>         phy-handle = <&{/i2c at 2000000/fpga at 66/mux-mdio at 54/mdio at 40/phy at 1f}>;
>  };
> +
> +&mscc_felix_port4 {
> +       ethernet = <&enetc2>;
> +       status = "okay";
> +};
> diff --git a/arch/arm/dts/fsl-ls1028a-qds-x3xx-sch-30841-LBRW.dtsi b/arch/arm/dts/fsl-ls1028a-qds-x3xx-sch-30841-LBRW.dtsi
> index 7e483e656e28..8c10897e565c 100644
> --- a/arch/arm/dts/fsl-ls1028a-qds-x3xx-sch-30841-LBRW.dtsi
> +++ b/arch/arm/dts/fsl-ls1028a-qds-x3xx-sch-30841-LBRW.dtsi
> @@ -19,6 +19,10 @@
>  #include "fsl-sch-30841.dtsi"
>  };
>
> +&enetc2 {
> +       status = "okay";
> +};
> +
>  &mscc_felix {
>         status = "okay";
>  };
> @@ -46,3 +50,8 @@
>         phy-mode = "usxgmii";
>         phy-handle = <&{/i2c at 2000000/fpga at 66/mux-mdio at 54/mdio at 50/phy at 03}>;
>  };
> +
> +&mscc_felix_port4 {
> +       ethernet = <&enetc2>;
> +       status = "okay";
> +};
> diff --git a/arch/arm/dts/fsl-ls1028a-qds-x5xx-sch-28021-LBRW.dtsi b/arch/arm/dts/fsl-ls1028a-qds-x5xx-sch-28021-LBRW.dtsi
> index 49fffdb9cb2a..1d800dacef89 100644
> --- a/arch/arm/dts/fsl-ls1028a-qds-x5xx-sch-28021-LBRW.dtsi
> +++ b/arch/arm/dts/fsl-ls1028a-qds-x5xx-sch-28021-LBRW.dtsi
> @@ -13,6 +13,10 @@
>         #include "fsl-sch-28021.dtsi"
>  };
>
> +&enetc2 {
> +       status = "okay";
> +};
> +
>  &mscc_felix {
>         status = "okay";
>  };
> @@ -40,3 +44,8 @@
>         phy-mode = "qsgmii";
>         phy-handle = <&{/i2c at 2000000/fpga at 66/mux-mdio at 54/mdio at 50/phy at 0b}>;
>  };
> +
> +&mscc_felix_port4 {
> +       ethernet = <&enetc2>;
> +       status = "okay";
> +};
> diff --git a/arch/arm/dts/fsl-ls1028a-qds-x7xx-sch-30842.dtsi b/arch/arm/dts/fsl-ls1028a-qds-x7xx-sch-30842.dtsi
> index 8347462f4cb0..1fb2cdf0c244 100644
> --- a/arch/arm/dts/fsl-ls1028a-qds-x7xx-sch-30842.dtsi
> +++ b/arch/arm/dts/fsl-ls1028a-qds-x7xx-sch-30842.dtsi
> @@ -9,6 +9,10 @@
>  #include "fsl-sch-30842.dtsi"
>  };
>
> +&enetc2 {
> +       status = "okay";
> +};
> +
>  &mscc_felix {
>         status = "okay";
>  };
> @@ -18,3 +22,8 @@
>         phy-mode = "sgmii-2500";
>         phy-handle = <&{/i2c at 2000000/fpga at 66/mux-mdio at 54/mdio at 50/phy at 02}>;
>  };
> +
> +&mscc_felix_port4 {
> +       ethernet = <&enetc2>;
> +       status = "okay";
> +};
> diff --git a/arch/arm/dts/fsl-ls1028a-qds-xx7x-sch-30842.dtsi b/arch/arm/dts/fsl-ls1028a-qds-xx7x-sch-30842.dtsi
> index 6be3b5094c81..2333f74e5ae1 100644
> --- a/arch/arm/dts/fsl-ls1028a-qds-xx7x-sch-30842.dtsi
> +++ b/arch/arm/dts/fsl-ls1028a-qds-xx7x-sch-30842.dtsi
> @@ -9,6 +9,10 @@
>  #include "fsl-sch-30842.dtsi"
>  };
>
> +&enetc2 {
> +       status = "okay";
> +};
> +
>  &mscc_felix {
>         status = "okay";
>  };
> @@ -18,3 +22,8 @@
>         phy-mode = "sgmii-2500";
>         phy-handle = <&{/i2c at 2000000/fpga at 66/mux-mdio at 54/mdio at 60/phy at 02}>;
>  };
> +
> +&mscc_felix_port4 {
> +       ethernet = <&enetc2>;
> +       status = "okay";
> +};
> --
> 2.25.1
>
Applied to u-boot-net/master, Thanks !
Ramon