[PATCH v2 0/7] J72xx: R5 SPL DMA support post HSM Rearch

[Lokesh Vutla]

On 07/06/21 7:47 pm, Vignesh Raghavendra wrote:
> This series add DMA support for R5 SPL on J721e/J7200 SoCs post HSM
> Rearch.
> 
> Depends on Tero's base HSM rearch support series.
> 
> v2:
> Use IS_ENABLED() consistentially instead of #ifdef
> Reword commit msg for 5/7 as suggested by Lokesh
> Rebase on Tero's latest HSM base series.

I see the folloiwing build warnings with this series:

arch/arm/dts/k3-j7200-common-proc-board.dtb: Warning (reg_format):
/bus at 100000/bus at 28380000/mcu-navss/ringacc at 2b800000:reg: property has invalid
length (80 bytes) (#address-cells == 2, #size-cells == 1)
arch/arm/dts/k3-j7200-common-proc-board.dtb: Warning (avoid_default_addr_size):
/bus at 100000/bus at 28380000/mcu-navss/ringacc at 2b800000: Relying on default
#address-cells value
arch/arm/dts/k3-j7200-common-proc-board.dtb: Warning (avoid_default_addr_size):
/bus at 100000/bus at 28380000/mcu-navss/ringacc at 2b800000: Relying on default
#size-cells value
arch/arm/dts/k3-j7200-common-proc-board.dtb: Warning (avoid_default_addr_size):
/bus at 100000/bus at 28380000/mcu-navss/dma-controller at 285c0000: Relying on default
#address-cells value
arch/arm/dts/k3-j7200-common-proc-board.dtb: Warning (avoid_default_addr_size):
/bus at 100000/bus at 28380000/mcu-navss/dma-controller at 285c0000: Relying on default
#size-cells value
arch/arm/dts/k3-j7200-r5-common-proc-board.dtb: Warning (reg_format):
/bus at 100000/bus at 28380000/mcu-navss/ringacc at 2b800000:reg: property has invalid
length (80 bytes) (#address-cells == 2, #size-cells == 1)
arch/arm/dts/k3-j7200-r5-common-proc-board.dtb: Warning
(avoid_default_addr_size): /bus at 100000/bus at 28380000/mcu-navss/ringacc at 2b800000:
Relying on default #address-cells value
arch/arm/dts/k3-j7200-r5-common-proc-board.dtb: Warning
(avoid_default_addr_size): /bus at 100000/bus at 28380000/mcu-navss/ringacc at 2b800000:
Relying on default #size-cells value
arch/arm/dts/k3-j7200-r5-common-proc-board.dtb: Warning
(avoid_default_addr_size):
/bus at 100000/bus at 28380000/mcu-navss/dma-controller at 285c0000: Relying on default
#address-cells value
arch/arm/dts/k3-j7200-r5-common-proc-board.dtb: Warning
(avoid_default_addr_size):
/bus at 100000/bus at 28380000/mcu-navss/dma-controller at 285c0000: Relying on default
#size-cells value

Can you fix it or send me fix, Ill can squash?

Thanks and regards,
Lokesh

> 
> 
> Vignesh Raghavendra (7):
>   mailbox: k3-sec-proxy: Add DM to DMSC communication thread
>   firmware: ti_sci: Implement GET_RANGE with static data
>   firmware: ti_sci: Add support for Resoure Management at R5 SPL stage.
>   ARM: dts: j72xx-r5-common-proc-board: Add DM firmware node
>   ARM: dts: k3: Add cfg register space for ringacc and udmap
>   soc: ti: k3-navss-ringacc: Add support for native configuration of
>     rings
>   dma: ti: k3-udma: Add support for native configuration of chan/flow
> 
>  arch/arm/dts/k3-am654-base-board-u-boot.dtsi  |  14 ++
>  .../k3-j7200-common-proc-board-u-boot.dtsi    |  26 +++
>  .../arm/dts/k3-j7200-r5-common-proc-board.dts |  17 ++
>  .../k3-j721e-common-proc-board-u-boot.dtsi    |  14 ++
>  .../arm/dts/k3-j721e-r5-common-proc-board.dts |  18 ++
>  .../firmware/ti,j721e-dm-sci.txt              |  32 ++++
>  drivers/dma/ti/k3-udma-u-boot.c               | 177 ++++++++++++++++++
>  drivers/dma/ti/k3-udma.c                      |  42 ++++-
>  drivers/firmware/ti_sci.c                     | 107 +++++++++++
>  drivers/firmware/ti_sci_static_data.h         |  92 +++++++++
>  drivers/mailbox/k3-sec-proxy.c                |   2 +-
>  drivers/soc/ti/k3-navss-ringacc-u-boot.c      |  61 ++++++
>  drivers/soc/ti/k3-navss-ringacc.c             |  36 +++-
>  13 files changed, 630 insertions(+), 8 deletions(-)
>  create mode 100644 doc/device-tree-bindings/firmware/ti,j721e-dm-sci.txt
>  create mode 100644 drivers/dma/ti/k3-udma-u-boot.c
>  create mode 100644 drivers/firmware/ti_sci_static_data.h
>  create mode 100644 drivers/soc/ti/k3-navss-ringacc-u-boot.c
>