[RESEND PATCH v6 2/2] mmc: openpiton: add piton_mmc driver
Jaehoon Chung
jh80.chung at samsung.com
Mon Jun 14 00:09:07 CEST 2021
Dear Tianrui,
On 6/13/21 2:16 AM, Tianrui Wei wrote:
> This commit adds support to piton_mmc driver for OpenPiton-riscv64
> In particular, this driver
>
> - V6
> . change type of address
> . move declarations ahead
> . loop style update
>
> Signed-off-by: Tianrui Wei <tianrui-wei at outlook.com>
> Signed-off-by: Jonathan Balkind <jbalkind at ucsb.edu>
> ---
> drivers/mmc/Kconfig | 9 +++
> drivers/mmc/Makefile | 1 +
> drivers/mmc/piton_mmc.c | 169 ++++++++++++++++++++++++++++++++++++++++
> 3 files changed, 179 insertions(+)
> create mode 100644 drivers/mmc/piton_mmc.c
>
> diff --git a/drivers/mmc/Kconfig b/drivers/mmc/Kconfig
> index 8901456967..096d6a930c 100644
> --- a/drivers/mmc/Kconfig
> +++ b/drivers/mmc/Kconfig
> @@ -727,6 +727,15 @@ config MMC_SUNXI_HAS_MODE_SWITCH
> bool
> depends on MMC_SUNXI
>
> +config MMC_PITON
> + bool "MMC support for OpenPiton SoC"
> + depends on DM_MMC && BLK
> + help
> + This selects support for the SD host controller on
> + OpenPiton SoC. Note that this SD controller directly
> + exposes the contents of the SD card as memory mapped,
> + so there is no manual configuration required
Fix indentation.
> +
> config GENERIC_ATMEL_MCI
> bool "Atmel Multimedia Card Interface support"
> depends on DM_MMC && BLK && ARCH_AT91
> diff --git a/drivers/mmc/Makefile b/drivers/mmc/Makefile
> index 89d6af3db3..cc08b41d0d 100644
> --- a/drivers/mmc/Makefile
> +++ b/drivers/mmc/Makefile
> @@ -72,6 +72,7 @@ obj-$(CONFIG_MMC_SDHCI_XENON) += xenon_sdhci.o
> obj-$(CONFIG_MMC_SDHCI_ZYNQ) += zynq_sdhci.o
>
> obj-$(CONFIG_MMC_SUNXI) += sunxi_mmc.o
> +obj-$(CONFIG_MMC_PITON) += piton_mmc.o
Ditto.
> obj-$(CONFIG_MMC_UNIPHIER) += tmio-common.o uniphier-sd.o
> obj-$(CONFIG_RENESAS_SDHI) += tmio-common.o renesas-sdhi.o
> obj-$(CONFIG_MMC_BCM2835) += bcm2835_sdhost.o
> diff --git a/drivers/mmc/piton_mmc.c b/drivers/mmc/piton_mmc.c
> new file mode 100644
> index 0000000000..32671d1a89
> --- /dev/null
> +++ b/drivers/mmc/piton_mmc.c
> @@ -0,0 +1,169 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * (C) Copyright 2009 SAMSUNG Electronics
> + * Minkyu Kang <mk7.kang at samsung.com>
> + * Jaehoon Chung <jh80.chung at samsung.com>
> + * Portions Copyright 2011-2019 NVIDIA Corporation
> + * Portions Copyright 2021 Tianrui Wei
> + * This file is adapted from tegra_mmc.c
> + * Tianrui Wei <tianrui-wei at outlook.com>
> + */
> +
> +#include <asm/gpio.h>
> +#include <asm/io.h>
> +#include <common.h>
> +#include <div64.h>
> +#include <dm.h>
> +#include <errno.h>
> +#include <linux/bitops.h>
> +#include <linux/delay.h>
> +#include <linux/err.h>
> +#include <linux/types.h>
> +#include <log.h>
> +#include <mmc.h>
> +
> +struct piton_mmc_plat {
> + struct mmc_config cfg;
> + struct mmc mmc;
> +};
> +
> +struct piton_mmc_priv {
> + void __iomem *piton_mmc_base_addr; /* peripheral id */
> +};
> +
> +/*
> + * see mmc_read_blocks to see how it is used.
> + * start block is hidden at cmd->arg
> + * also, initialize the block size at init
> + */
> +static int piton_mmc_send_cmd(struct udevice *dev, struct mmc_cmd *cmd,
> + struct mmc_data *data)
Ditto.
> +{
> + /* check first if this is a pure command */
> + if (!data)
> + return 0;
> +
> + struct piton_mmc_priv *priv = dev_get_priv(dev);
> + u32 *buff, *start_addr;
> + size_t byte_cnt, start_block;
> +
> + buff = (u32 *)data->dest;
> + start_block = cmd->cmdarg;
> + start_addr = priv->piton_mmc_base_addr + start_block;
> +
> + /* if there is a read */
> + if (data->flags & MMC_DATA_READ) {
> + for (byte_cnt = data->blocks * data->blocksize; byte_cnt;
> + byte_cnt -= sizeof(u32)) {
> + *buff++ = readl(start_addr++);
> + }
> + } else {
> + return -ENOSYS;
Is is right to return -ENOSYS? MMC_DATA_WRITE doesn't support?
> + }
> +
> + return 0;
> +}
> +
> +static int piton_mmc_ofdata_to_platdata(struct udevice *dev)
> +{
> + struct piton_mmc_priv *priv = dev_get_priv(dev);
> + struct piton_mmc_plat *plat = dev_get_platdata(dev);
> + struct mmc_config *cfg;
> + struct mmc *mmc;
> + /* fill in device description */
> + struct blk_desc *bdesc;
> +
> + priv->piton_mmc_base_addr = (void *)dev_read_addr(dev);
> + cfg = &plat->cfg;
> + cfg->name = "PITON MMC";
> + cfg->host_caps = MMC_MODE_8BIT;
> + cfg->f_max = 100000;
f_max is 100K? I don't think so.
> + cfg->f_min = 400000;
> + cfg->voltages = MMC_VDD_21_22;
> +
> + mmc = &plat->mmc;
> + mmc->read_bl_len = MMC_MAX_BLOCK_LEN;
> + mmc->capacity_user = 0x100000000;
> + mmc->capacity_user *= mmc->read_bl_len;
> + mmc->capacity_boot = 0;
> + mmc->capacity_rpmb = 0;
> + for (int i = 0; i < 4; i++)
> + mmc->capacity_gp[i] = 0;
> + mmc->capacity = 0x2000000000ULL;
Use macro. It's not readable. What's 0x2000000000ULL?
> + mmc->has_init = 1;
Right? has_init will be set in mmc.c.
Why it's set to 1 in driver?
> +
> + bdesc = mmc_get_blk_desc(mmc);
> + bdesc->lun = 0;
> + bdesc->hwpart = 0;
> + bdesc->type = 0;
> + bdesc->blksz = mmc->read_bl_len;
> + bdesc->log2blksz = LOG2(bdesc->blksz);
> + bdesc->lba = lldiv(mmc->capacity, mmc->read_bl_len);
> +
> + return 0;
> +}
> +
> +/* test if the micro sd card is present
> + * always return 1, which means present
> + */
> +static int piton_mmc_getcd(struct udevice *dev)
> +{
> + /*
> + * always return 1
> + */
> + return 1;
> +}
> +
> +/* dummy function, piton_mmc don't need initialization
> + * in hw
> + */
> +static const struct dm_mmc_ops piton_mmc_ops = {
> + .send_cmd = piton_mmc_send_cmd,
> + .get_cd = piton_mmc_getcd,
> +};
> +
> +static int piton_mmc_probe(struct udevice *dev)
> +{
> + struct mmc_uclass_priv *upriv = dev_get_uclass_priv(dev);
> + struct piton_mmc_plat *plat = dev_get_platdata(dev);
> + struct mmc_config *cfg = &plat->cfg;
> +
> + cfg->name = dev->name;
> + upriv->mmc = &plat->mmc;
> + upriv->mmc->has_init = 1;
Ditto.
> + upriv->mmc->capacity = 0x2000000000ULL;
Ditto.
> + upriv->mmc->read_bl_len = MMC_MAX_BLOCK_LEN;
readl_blk_len will be set in mmc.c.
Your driver doesn't use mmc.c? Why do you set to some values in your driver?
> + return 0;
> +}
> +
> +static int piton_mmc_bind(struct udevice *dev)
> +{
> + struct piton_mmc_plat *plat = dev_get_platdata(dev);
> + struct mmc_config *cfg = &plat->cfg;
> +
> + cfg->name = dev->name;
> + cfg->host_caps = MMC_MODE_HS_52MHz | MMC_MODE_HS | MMC_MODE_8BIT;
> + cfg->voltages = MMC_VDD_165_195 | MMC_VDD_32_33 | MMC_VDD_33_34;
> + cfg->f_min = 1000000;
> + cfg->f_max = 52000000;
> + cfg->b_max = U32_MAX;
Use a readable value instead of U32_MAX. CONFIG_SYS_MMC_MAX_BLK_COUNT or other.
Best Regards,
Jaehoon Chung
> +
> + return mmc_bind(dev, &plat->mmc, cfg);
> +}
> +
> +static const struct udevice_id piton_mmc_ids[] = {
> + {.compatible = "openpiton,piton-mmc"},
> + {/* sentinel */}
> +};
> +
> +U_BOOT_DRIVER(piton_mmc_drv) = {
> + .name = "piton_mmc",
> + .id = UCLASS_MMC,
> + .of_match = piton_mmc_ids,
> + .ofdata_to_platdata = piton_mmc_ofdata_to_platdata,
> + .bind = piton_mmc_bind,
> + .probe = piton_mmc_probe,
> + .ops = &piton_mmc_ops,
> + .platdata_auto_alloc_size = sizeof(struct piton_mmc_plat),
> + .priv_auto_alloc_size = sizeof(struct piton_mmc_priv),
> +};
>
More information about the U-Boot
mailing list