[PATCH v7] imx: support for conga-QMX8 board

[sbabic at denx.de]

> Add i.MX8QM qmx8 congatec board support
> U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200)
> CPU:   NXP i.MX8QM RevB A53 at 1200 MHz
> Model: Congatec QMX8 Qseven series
> Board: conga-QMX8
> Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9
> Boot:  SD2
> DRAM:  6 GiB
> MMC:   FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2
> Loading Environment from MMC... OK
> In:    serial at 5a060000
> Out:   serial at 5a060000
> Err:   serial at 5a060000
> switch to partitions #0, OK
> mmc2 is current device
> Net:
> Error: ethernet at 5b040000 address not set.
> No ethernet found.
> Hit any key to stop autoboot:  0
> Signed-off-by: Oliver Graute <oliver.graute at kococonnector.com>
> Cc: Stefano Babic <sbabic at denx.de>
> Cc: Fabio Estevam <festevam at gmail.com>
> Cc: Peng Fan <peng.fan at nxp.com>
> Cc: Simon Glass <sjg at chromium.org>
> Cc: Ye Li <ye.li at nxp.com>
> Cc: uboot-imx <uboot-imx at nxp.com>
Applied to u-boot-imx, master, thanks !

Best regards,
Stefano Babic

-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================