[PATCH 1/3] imx8mm: configs: enable distro default features

[Stefano Babic]

On 17.06.21 18:03, ZHIZHIKIN Andrey wrote:
> Hello Stefano,
> 
> I believe the following patch is missing from the series that I've submitted earlier.
> 
>  From the entire series named "Correct and extend distro boot support for imx8m" [1], there were 3 patches included, namely:
> [2]  imx8mm: configs: enable distro default features
> [3]  imx8mp: configs: enable distro default features
> [4]  imx8mn: configs: add support for distro boot commands
> 
> I see that only [4] is actually got merged, the rest 2 patches are left in "Superseded" state in Patchwork.
> 
> I'm not sure what happened here, I believe that was due to the fact that the patch which targeted "imx8mn" has been updated to V2 which caused the entire series to be dropped.
> 
> Should I re-submit the rest of 2 patches from the original series, or perhaps you can take them from the Patchwork directly?
> 

I picked up the two missing patches, just take a look at u-boot-imx, 
-master.

Best regards,
Stefano

>> -----Original Message-----
>> From: Fabio Estevam <festevam at gmail.com>
>> Sent: Sunday, May 2, 2021 12:00 AM
>> To: ZHIZHIKIN Andrey <andrey.zhizhikin at leica-geosystems.com>
>> Cc: U-Boot-Denx <u-boot at lists.denx.de>; Peng Fan <peng.fan at nxp.com>
>> Subject: Re: [PATCH 1/3] imx8mm: configs: enable distro default features
>>
>> Hi Andrey,
>>
>> On Sat, May 1, 2021 at 5:24 PM Andrey Zhizhikin <andrey.zhizhikin at leica-
>> geosystems.com> wrote:
>>>
>>> imx8mm ekv has been switched to use distro boot commands, but had no
>>> correct options enabled to support sysboot.
>>> According to the README.distro, sysboot is consindered to be a
>>> recommended way of using distro boot commands, it required default
>>> distro features to be enabled instead of only those that are relevant
>>> to the boot script.
>>>
>>> Replace the boot script specific options in the config to a default
>>> distro option.
>>>
>>> Signed-off-by: Andrey Zhizhikin
>>> <andrey.zhizhikin at leica-geosystems.com>
>>> Cc: Peng Fan <peng.fan at nxp.com>
>>> Fixes: 2df8930bf9 ("imx8mm: configs: add support for distro boot
>>> commands")
>>
>> Reviewed-by: Fabio Estevam <festevam at gmail.com>
> 
> Link: [1]: http://patchwork.ozlabs.org/project/uboot/list/?series=241695
> Link: [2]: http://patchwork.ozlabs.org/project/uboot/patch/20210501202306.5254-2-andrey.zhizhikin@leica-geosystems.com/
> Link: [3]: http://patchwork.ozlabs.org/project/uboot/patch/20210501202306.5254-3-andrey.zhizhikin@leica-geosystems.com/
> Link: [4]: http://patchwork.ozlabs.org/project/uboot/patch/20210501202306.5254-4-andrey.zhizhikin@leica-geosystems.com/
> 
> -- Andrey
> 


-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================