[PATCH 3/7] arm64: zynqmp: Remove si5328 and si5382 nodes

[Michal Simek]

There are no drivers for these devices that's why remove that nodes
completely. This change is done based on Linux kernel.

Signed-off-by: Michal Simek <michal.simek at xilinx.com>
Link: https://lore.kernel.org/r/20210308115437.2232847-1-quanyang.wang@windriver.com
---

 arch/arm/dts/zynqmp-zcu102-revA.dts | 10 +---------
 arch/arm/dts/zynqmp-zcu104-revA.dts |  5 +----
 arch/arm/dts/zynqmp-zcu104-revC.dts |  5 +----
 arch/arm/dts/zynqmp-zcu106-revA.dts | 20 +-------------------
 arch/arm/dts/zynqmp-zcu111-revA.dts |  5 +----
 5 files changed, 5 insertions(+), 40 deletions(-)

diff --git a/arch/arm/dts/zynqmp-zcu102-revA.dts b/arch/arm/dts/zynqmp-zcu102-revA.dts
index daf945702508..c1af5fc635ee 100644
--- a/arch/arm/dts/zynqmp-zcu102-revA.dts
+++ b/arch/arm/dts/zynqmp-zcu102-revA.dts
@@ -604,15 +604,7 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <4>;
-			si5328: clock-generator at 69 {/* SI5328 - u20 */
-				compatible = "silabs,si5328";
-				reg = <0x69>;
-				/*
-				 * Chip has interrupt present connected to PL
-				 * interrupt-parent = <&>;
-				 * interrupts = <>;
-				 */
-			};
+			/* SI5328 - u20 */
 		};
 		/* 5 - 7 unconnected */
 	};
diff --git a/arch/arm/dts/zynqmp-zcu104-revA.dts b/arch/arm/dts/zynqmp-zcu104-revA.dts
index d10ff419b07c..1564057cf792 100644
--- a/arch/arm/dts/zynqmp-zcu104-revA.dts
+++ b/arch/arm/dts/zynqmp-zcu104-revA.dts
@@ -165,10 +165,7 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <1>;
-			clock_8t49n287: clock-generator at 6c { /* 8T49N287 - u182 */
-				compatible = "idt,8t49n287";
-				reg = <0x6c>;
-			};
+			/* 8T49N287 - u182 */
 		};
 
 		i2c at 2 {
diff --git a/arch/arm/dts/zynqmp-zcu104-revC.dts b/arch/arm/dts/zynqmp-zcu104-revC.dts
index e70b66c90b6e..9ed27ec4f8e6 100644
--- a/arch/arm/dts/zynqmp-zcu104-revC.dts
+++ b/arch/arm/dts/zynqmp-zcu104-revC.dts
@@ -189,10 +189,7 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <1>;
-			clock_8t49n287: clock-generator at 6c { /* 8T49N287 - u182 */
-				compatible = "idt,8t49n287";
-				reg = <0x6c>;
-			};
+			/* 8T49N287 - u182 */
 		};
 
 		i2c at 2 {
diff --git a/arch/arm/dts/zynqmp-zcu106-revA.dts b/arch/arm/dts/zynqmp-zcu106-revA.dts
index cafac6ba6814..26c530d81685 100644
--- a/arch/arm/dts/zynqmp-zcu106-revA.dts
+++ b/arch/arm/dts/zynqmp-zcu106-revA.dts
@@ -594,25 +594,7 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <4>;
-			si5328: clock-generator at 69 {/* SI5328 - u20 */
-				reg = <0x69>;
-				/*
-				 * Chip has interrupt present connected to PL
-				 * interrupt-parent = <&>;
-				 * interrupts = <>;
-				 */
-				#address-cells = <1>;
-				#size-cells = <0>;
-				#clock-cells = <1>;
-				clocks = <&refhdmi>;
-				clock-names = "xtal";
-				clock-output-names = "si5328";
-
-				si5328_clk: clk0 at 0 {
-					reg = <0>;
-					clock-frequency = <27000000>;
-				};
-			};
+			/* SI5328 - u20 */
 		};
 		i2c at 5 {
 			#address-cells = <1>;
diff --git a/arch/arm/dts/zynqmp-zcu111-revA.dts b/arch/arm/dts/zynqmp-zcu111-revA.dts
index 4cf27ed1549c..2cf6421da3c5 100644
--- a/arch/arm/dts/zynqmp-zcu111-revA.dts
+++ b/arch/arm/dts/zynqmp-zcu111-revA.dts
@@ -480,10 +480,7 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <4>;
-			si5382: clock-generator at 69 { /* SI5382 - u48 */
-				compatible = "silabs,si5382";
-				reg = <0x69>;
-			};
+			/* SI5382 - u48 */
 		};
 		i2c at 5 {
 			#address-cells = <1>;
-- 
2.31.1