[PATCH v2] imx: Add SeeedStudio NPI-IMX6ULL Support

[sbabic at denx.de]

> CPU:   Freescale i.MX6ULL rev1.1 792 MHz (running at 396 MHz)
> CPU:   Industrial temperature grade (-40C to 105C) at 49C
> Reset cause: POR
> Model: Seeed NPi iMX6ULL Dev Board with NAND
> Board: Seeed NPi i.MX6ULL Dev Board
> DRAM:  512 MiB
> NAND:  512 MiB
> MMC:   FSL_SDHC: 0
> In:    serial at 2020000
> Out:   serial at 2020000
> Err:   serial at 2020000
> Net:   FEC0
> Working:
> - Eth0
> - MMC/SD
> - NAND
> - UART 1
> - USB host
> Signed-off-by: Navin Sankar Velliangiri <navin at linumiz.com>
> Note:
> Changes in v2:
>  * removed unnecessary space in imx6ull-seeed-npi-imx6ull-dev-board.dts file.
>  * Used SZ_2M for CONFIG_SYS_MALLOC_LEN size allocation.
Applied to u-boot-imx, master, thanks !

Best regards,
Stefano Babic

-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================