[PATCH] arm64: zynqmp: Handle MMC seq number based on boot device

Michal Simek monstr at monstr.eu
Thu Jun 10 09:24:49 CEST 2021


po 31. 5. 2021 v 9:52 odesílatel Michal Simek <michal.simek at xilinx.com> napsal:
>
> K26 has EMMC and SD and default 0 is not working when system is booting out
> of SD which is controller 1. Add controller autodetection via
> mmc_get_env_dev(). The same code is used for distro_boot selection done in
> board_late_init(). bootseq variable can't be reused because this is called
> so late.
>
> Signed-off-by: Michal Simek <michal.simek at xilinx.com>
> ---
>
>  board/xilinx/zynqmp/zynqmp.c         | 35 ++++++++++++++++++++++++++++
>  configs/xilinx_zynqmp_virt_defconfig |  1 +
>  2 files changed, 36 insertions(+)
>
> diff --git a/board/xilinx/zynqmp/zynqmp.c b/board/xilinx/zynqmp/zynqmp.c
> index 6e353e3b0a57..46dee80470fa 100644
> --- a/board/xilinx/zynqmp/zynqmp.c
> +++ b/board/xilinx/zynqmp/zynqmp.c
> @@ -709,6 +709,41 @@ int checkboard(void)
>         return 0;
>  }
>
> +int mmc_get_env_dev(void)
> +{
> +       struct udevice *dev;
> +       int bootseq = 0;
> +
> +       switch (zynqmp_get_bootmode()) {
> +       case EMMC_MODE:
> +       case SD_MODE:
> +               if (uclass_get_device_by_name(UCLASS_MMC,
> +                                             "mmc at ff160000", &dev) &&
> +                   uclass_get_device_by_name(UCLASS_MMC,
> +                                             "sdhci at ff160000", &dev)) {
> +                       return -1;
> +               }
> +               bootseq = dev_seq(dev);
> +               break;
> +       case SD1_LSHFT_MODE:
> +       case SD_MODE1:
> +               if (uclass_get_device_by_name(UCLASS_MMC,
> +                                             "mmc at ff170000", &dev) &&
> +                   uclass_get_device_by_name(UCLASS_MMC,
> +                                             "sdhci at ff170000", &dev)) {
> +                       return -1;
> +               }
> +               bootseq = dev_seq(dev);
> +               break;
> +       default:
> +               break;
> +       }
> +
> +       debug("bootseq %d\n", bootseq);
> +
> +       return bootseq;
> +}
> +
>  enum env_location env_get_location(enum env_operation op, int prio)
>  {
>         u32 bootmode = zynqmp_get_bootmode();
> diff --git a/configs/xilinx_zynqmp_virt_defconfig b/configs/xilinx_zynqmp_virt_defconfig
> index ece527e07468..1df0ef66c22c 100644
> --- a/configs/xilinx_zynqmp_virt_defconfig
> +++ b/configs/xilinx_zynqmp_virt_defconfig
> @@ -76,6 +76,7 @@ CONFIG_ENV_IS_IN_FAT=y
>  CONFIG_ENV_IS_IN_NAND=y
>  CONFIG_ENV_IS_IN_SPI_FLASH=y
>  CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
> +CONFIG_ENV_FAT_DEVICE_AND_PART=":auto"
>  CONFIG_SYS_RELOC_GD_ENV_ADDR=y
>  CONFIG_NET_RANDOM_ETHADDR=y
>  CONFIG_NETCONSOLE=y
> --
> 2.31.1
>

Applied.
M

-- 
Michal Simek, Ing. (M.Eng), OpenPGP -> KeyID: FE3D1F91
w: www.monstr.eu p: +42-0-721842854
Maintainer of Linux kernel - Xilinx Microblaze
Maintainer of Linux kernel - Xilinx Zynq ARM and ZynqMP ARM64 SoCs
U-Boot custodian - Xilinx Microblaze/Zynq/ZynqMP/Versal SoCs


More information about the U-Boot mailing list