[PATCH] arm64: zynqmp: Add support for 64bit addresses in its

Michal Simek monstr at monstr.eu
Mon Jun 14 10:01:49 CEST 2021


po 7. 6. 2021 v 12:55 odesílatel Michal Simek <michal.simek at xilinx.com> napsal:
>
> Xilinx ZynqMP supports also addresses above 4GB (32bit) that's why also
> generate u-boot.its with 64bit load/entry addresses to also support
> different configurations.
>
> Signed-off-by: Michal Simek <michal.simek at xilinx.com>
> ---
>
>  arch/arm/mach-zynqmp/mkimage_fit_atf.sh | 22 +++++++++++++++-------
>  1 file changed, 15 insertions(+), 7 deletions(-)
>
> diff --git a/arch/arm/mach-zynqmp/mkimage_fit_atf.sh b/arch/arm/mach-zynqmp/mkimage_fit_atf.sh
> index 700871dbe109..592be7f67066 100755
> --- a/arch/arm/mach-zynqmp/mkimage_fit_atf.sh
> +++ b/arch/arm/mach-zynqmp/mkimage_fit_atf.sh
> @@ -13,6 +13,8 @@ BL31_ELF="${BL31%.*}.elf"
>  awk '/Entry point/ { print $3 }'`
>
>  [ -z "$ATF_LOAD_ADDR" ] && ATF_LOAD_ADDR="0xfffea000"
> +ATF_LOAD_ADDR_LOW=`printf 0x%x $((ATF_LOAD_ADDR & 0xffffffff))`
> +ATF_LOAD_ADDR_HIGH=`printf 0x%x $((ATF_LOAD_ADDR >> 32))`
>
>  [ -z "$BL32" ] && BL32="tee.bin"
>  BL32_ELF="${BL32%.*}.elf"
> @@ -20,14 +22,20 @@ BL32_ELF="${BL32%.*}.elf"
>  awk '/Entry point/ { print $3 }'`
>
>  [ -z "$TEE_LOAD_ADDR" ] && TEE_LOAD_ADDR="0x60000000"
> +TEE_LOAD_ADDR_LOW=`printf 0x%x $((TEE_LOAD_ADDR & 0xffffffff))`
> +TEE_LOAD_ADDR_HIGH=`printf 0x%x $((TEE_LOAD_ADDR >> 32))`
>
>  if [ -z "$BL33_LOAD_ADDR" ];then
>         BL33_LOAD_ADDR=`awk '/CONFIG_SYS_TEXT_BASE/ { print $3 }' include/generated/autoconf.h`
>  fi
> +BL33_LOAD_ADDR_LOW=`printf 0x%x $((BL33_LOAD_ADDR & 0xffffffff))`
> +BL33_LOAD_ADDR_HIGH=`printf 0x%x $((BL33_LOAD_ADDR >> 32))`
>
>  DTB_LOAD_ADDR=`awk '/CONFIG_XILINX_OF_BOARD_DTB_ADDR/ { print $3 }' include/generated/autoconf.h`
>  if [ ! -z "$DTB_LOAD_ADDR" ]; then
> -       DTB_LOAD="load = <$DTB_LOAD_ADDR>;"
> +       DTB_LOAD_ADDR_LOW=`printf 0x%x $((DTB_LOAD_ADDR & 0xffffffff))`
> +       DTB_LOAD_ADDR_HIGH=`printf 0x%x $((DTB_LOAD_ADDR >> 32))`
> +       DTB_LOAD="load = <$DTB_LOAD_ADDR_HIGH $DTB_LOAD_ADDR_LOW>;"
>  else
>         DTB_LOAD=""
>  fi
> @@ -59,8 +67,8 @@ cat << __HEADER_EOF
>                         os = "u-boot";
>                         arch = "arm64";
>                         compression = "none";
> -                       load = <$BL33_LOAD_ADDR>;
> -                       entry = <$BL33_LOAD_ADDR>;
> +                       load = <$BL33_LOAD_ADDR_HIGH $BL33_LOAD_ADDR_LOW>;
> +                       entry = <$BL33_LOAD_ADDR_HIGH $BL33_LOAD_ADDR_LOW>;
>                         hash {
>                                 algo = "md5";
>                         };
> @@ -76,8 +84,8 @@ cat << __ATF
>                         os = "arm-trusted-firmware";
>                         arch = "arm64";
>                         compression = "none";
> -                       load = <$ATF_LOAD_ADDR>;
> -                       entry = <$ATF_LOAD_ADDR>;
> +                       load = <$ATF_LOAD_ADDR_HIGH $ATF_LOAD_ADDR_LOW>;
> +                       entry = <$ATF_LOAD_ADDR_HIGH $ATF_LOAD_ADDR_LOW>;
>                         hash {
>                                 algo = "md5";
>                         };
> @@ -94,8 +102,8 @@ cat << __TEE
>                         os = "tee";
>                         arch = "arm64";
>                         compression = "none";
> -                       load = <$TEE_LOAD_ADDR>;
> -                       entry = <$TEE_LOAD_ADDR>;
> +                       load = <$TEE_LOAD_ADDR_HIGH $TEE_LOAD_ADDR_LOW>;
> +                       entry = <$TEE_LOAD_ADDR_HIGH $TEE_LOAD_ADDR_LOW>;
>                         hash {
>                                 algo = "md5";
>                         };
> --
> 2.31.1
>

Applied.
M


-- 
Michal Simek, Ing. (M.Eng), OpenPGP -> KeyID: FE3D1F91
w: www.monstr.eu p: +42-0-721842854
Maintainer of Linux kernel - Xilinx Microblaze
Maintainer of Linux kernel - Xilinx Zynq ARM and ZynqMP ARM64 SoCs
U-Boot custodian - Xilinx Microblaze/Zynq/ZynqMP/Versal SoCs


More information about the U-Boot mailing list