[PATCH 0/4] board: freescale: add T2080RDB rev D support
trini at konsulko.com
Thu Jun 10 21:19:11 CEST 2021
On Thu, Jun 10, 2021 at 03:39:35PM +0300, Camelia Groza wrote:
> From: Camelia Groza <camelia.groza at nxp.com>
> The T2080RDB boards revision D and up have updated Aquantia PHYs on the
> two 10Gbps copper ports connected to MAC1 and MAC2 (from AQ1202 to
> AQR113C). The second PHY connected to MAC2 is located at a different
> address on the MDIO bus compared to revision C boards. Device tree
> fixups are required for both Linux and u-boot to set the correct PHY
> address for the new board revisions.
> The first patch in the series implements a callback that detects the
> board revision based on the CPLD registers.
> The second patch updates the PHY addresses in u-boot for the legacy,
> non-DM, driver implementation.
I'd much rather see DM_ETH migration completed and non-DM_ETH code
removed while someone is actively here again. Thanks!
-------------- next part --------------
A non-text attachment was scrubbed...
Size: 659 bytes
Desc: not available
More information about the U-Boot