[PATCH -next] ARM: dts: k3-j7200-common-proc-board-u-boot.dtsi: Fix dtc warnings

[Lokesh Vutla]

+Tom

On 14/06/21 2:12 pm, Vignesh Raghavendra wrote:
> Fix following dtc warning by explicitly setting up #size-cells
> and #address-cells when overriding node in -u-boot.dtsi
> 
> arch/arm/dts/k3-j7200-common-proc-board.dtb: Warning (reg_format):
> /bus at 100000/bus at 28380000/mcu-navss/ringacc at 2b800000:reg: property has
> invalid length (80 bytes) (#address-cells == 2, #size-cells == 1)
> 
> Signed-off-by: Vignesh Raghavendra <vigneshr at ti.com>

Tom,
	If you don't mind, can you pull the patch to next directly? This fixed the DT
warning on j7200 builds.

Thanks and regards,
Lokesh

> ---
>  arch/arm/dts/k3-j7200-common-proc-board-u-boot.dtsi | 2 ++
>  1 file changed, 2 insertions(+)
> 
> diff --git a/arch/arm/dts/k3-j7200-common-proc-board-u-boot.dtsi b/arch/arm/dts/k3-j7200-common-proc-board-u-boot.dtsi
> index 41ce9fcb59..786cc48050 100644
> --- a/arch/arm/dts/k3-j7200-common-proc-board-u-boot.dtsi
> +++ b/arch/arm/dts/k3-j7200-common-proc-board-u-boot.dtsi
> @@ -43,6 +43,8 @@
>  
>  	mcu-navss{
>  		u-boot,dm-spl;
> +		#address-cells = <2>;
> +		#size-cells = <2>;
>  
>  		ringacc at 2b800000 {
>  			reg =	<0x0 0x2b800000 0x0 0x400000>,
>