[PATCH v5 00/13] arm64: synquacer: Add SynQuacer/DeveloperBox support
Ilias Apalodimas
ilias.apalodimas at linaro.org
Fri Jun 11 10:05:36 CEST 2021
Acked-by: Ilias Apalodimas <ilias.apalodimas at linaro.org>
Tested-by: Ilias Apalodimas <ilias.apalodimas at linaro.org>
On Fri, 11 Jun 2021 at 10:25, Masami Hiramatsu <masami.hiramatsu at linaro.org>
wrote:
> Hello,
>
> Would anyone have any comments on this series?
>
> Thank you,
>
> 2021年6月4日(金) 18:43 Masami Hiramatsu <masami.hiramatsu at linaro.org>:
> >
> > Hi,
> >
> > Here is the 5th version of the series (including some fixes for build
> > errors) to add SynQuacer/DeveloperBox 96board EE suport on U-Boot.
> >
> > This series includes not only DeveloperBox support but also some fixes
> > for the issues which I faced while porting U-Boot on the DeveloperBox.
> > First 3 patches are fixes, next 1 patch is a code cleanup for generic
> > gpio for arm. The next 7 patches adding DeveloperBox devices
> > and board support. The last 2 patches are related to the UEFI capsule
> > update.
> >
> > Previous version is here:
> >
> > https://lists.denx.de/pipermail/u-boot/2021-May/449305.html
> >
> >
> > Changes in v5
> > -------------
> >
> > I dripped dfu_mtd bugfix patch (previous [12/14]) from this,
> > because Sughosh already fixed it.
> >
> > [11/13]:
> > - Remove log level from config.
> >
> >
> > DeveloperBox
> > ============
> >
> > DeveloperBox is a certified 96boards Enterprise Edition board. The
> board/SoC has: -
> > * Socionext SC2A11 24-cores ARM Cortex-A53 on tbe Mini-ATX form factor
> motherboard
> > * 4 DIMM slots (4GB DDR4-2400 UDIMM shipped by default)
> > * 1 4xPCIe Gen2 slot and 2 1xPCIe Gen2 slots
> > (1x slots are connected via PCIe bridge chip)
> > * 4 USB-3.0 ports
> > * 2 SATA ports
> > * 1 GbE network port
> > * 1 USB-UART serial port (micro USB)
> > * 64MB SPI NOR Flash
> > * 8GB eMMC Flash Storage
> > * 96boards LS connector
> >
> > The DeveloperBox schematic can be found here: -
> >
> https://www.96boards.org/documentation/enterprise/developerbox/hardware-docs/mzsc2am_v03_20180115_a.pdf
> >
> > And the other documents can be found here: -
> > https://www.96boards.org/documentation/enterprise/developerbox/
> >
> >
> > Currently, the U-Boot port supports: -
> > * USB
> > * eMMC
> > * SPI-NOR
> > * SATA
> > * GbE
> >
> > The DeveloperBox boots the TF-A and EDK2 as a main bootloader by default.
> > The DeveloperBox U-Boot port will replace the EDK2 and boot from TF-A as
> > BL33, but no need to combine with it.
> >
> >
> > Thank you,
> >
> > ---
> >
> > Jassi Brar (4):
> > mmc: synquacer: Add SynQuacer F_SDH30 SDHCI driver
> > spi: synquacer: Add HSSPI SPI controller driver for SynQuacer
> > net: synquacer: Add netsec driver
> > i2c: synquacer: SNI Synquacer I2C controller
> >
> > Masami Hiramatsu (9):
> > ata: ahci-pci: Use scsi_ops to initialize ops
> > dm: pci: Skip setting VGA bridge bits if parent device is the host
> bus
> > efi: Fix to use null handle to create new handle for efi_fmp_raw
> > gpio: Introduce CONFIG_GPIO_EXTRA_HEADER to cleanup #ifdefs
> > pci: synquacer: Add SynQuacer ECAM based PCIe driver
> > ARM: dts: synquacer: Add device trees for DeveloperBox
> > board: synquacer: Add DeveloperBox 96boards EE support
> > doc: qemu: arm64: Fix the documentation of capsule update
> > configs: synquacer: Enable EFI capsule update support
> >
> >
> > arch/arm/Kconfig | 108 ++
> > arch/arm/dts/Makefile | 2
> > arch/arm/dts/synquacer-sc2a11-caches.dtsi | 73 +
> > .../dts/synquacer-sc2a11-developerbox-u-boot.dtsi | 75 +
> > arch/arm/dts/synquacer-sc2a11-developerbox.dts | 56 +
> > arch/arm/dts/synquacer-sc2a11.dtsi | 595 ++++++++++
> > arch/arm/include/asm/gpio.h | 8
> > board/socionext/developerbox/Kconfig | 36 +
> > board/socionext/developerbox/MAINTAINERS | 14
> > board/socionext/developerbox/Makefile | 9
> > board/socionext/developerbox/developerbox.c | 146 +++
> > configs/synquacer_developerbox_defconfig | 129 ++
> > doc/board/emulation/qemu_capsule_update.rst | 11
> > doc/board/index.rst | 1
> > doc/board/socionext/developerbox.rst | 87 ++
> > doc/board/socionext/index.rst | 9
> > drivers/ata/ahci-pci.c | 2
> > drivers/i2c/Kconfig | 7
> > drivers/i2c/Makefile | 1
> > drivers/i2c/synquacer_i2c.c | 338 ++++++
> > drivers/mmc/Kconfig | 10
> > drivers/mmc/Makefile | 1
> > drivers/mmc/f_sdh30.c | 81 +
> > drivers/net/Kconfig | 8
> > drivers/net/Makefile | 1
> > drivers/net/sni_netsec.c | 1134
> ++++++++++++++++++++
> > drivers/pci/Kconfig | 12
> > drivers/pci/Makefile | 1
> > drivers/pci/pci-uclass.c | 3
> > drivers/pci/pcie_ecam_synquacer.c | 600 +++++++++++
> > drivers/spi/Kconfig | 8
> > drivers/spi/Makefile | 1
> > drivers/spi/spi-synquacer.c | 491 +++++++++
> > include/configs/synquacer.h | 115 ++
> > lib/efi_loader/efi_capsule.c | 2
> > 35 files changed, 4158 insertions(+), 17 deletions(-)
> > create mode 100644 arch/arm/dts/synquacer-sc2a11-caches.dtsi
> > create mode 100644
> arch/arm/dts/synquacer-sc2a11-developerbox-u-boot.dtsi
> > create mode 100644 arch/arm/dts/synquacer-sc2a11-developerbox.dts
> > create mode 100644 arch/arm/dts/synquacer-sc2a11.dtsi
> > create mode 100644 board/socionext/developerbox/Kconfig
> > create mode 100644 board/socionext/developerbox/MAINTAINERS
> > create mode 100644 board/socionext/developerbox/Makefile
> > create mode 100644 board/socionext/developerbox/developerbox.c
> > create mode 100644 configs/synquacer_developerbox_defconfig
> > create mode 100644 doc/board/socionext/developerbox.rst
> > create mode 100644 doc/board/socionext/index.rst
> > create mode 100644 drivers/i2c/synquacer_i2c.c
> > create mode 100644 drivers/mmc/f_sdh30.c
> > create mode 100644 drivers/net/sni_netsec.c
> > create mode 100644 drivers/pci/pcie_ecam_synquacer.c
> > create mode 100644 drivers/spi/spi-synquacer.c
> > create mode 100644 include/configs/synquacer.h
> >
> > --
> > Masami Hiramatsu <masami.hiramatsu at linaro.org>
>
>
>
> --
> Masami Hiramatsu
>
More information about the U-Boot
mailing list