[PATCH v2] board: sl28: add DSA support for variant 2

[Michael Walle]

Now that u-boot gained DSA support, and it is already enabled for the
kontron_sl28 board, add the last missing piece and enable the
corresponding devices it in the device tree.

Signed-off-by: Michael Walle <michael at walle.cc>
---
changes since v1:
 - renamed ethernet alias stem, because it was changed in
   commit 82a3c9ef20d43d97416589854b4bbcb4c2450c24 ("net: use the same
   alias stem for ethernet as linux")

Now that the mentioned commit made it finally into u-boot. We can move
forward here. It would be nice if this would still make it into 2021.07,
given that this is only a device tree change for a this particular board.

 .../fsl-ls1028a-kontron-sl28-var2-u-boot.dtsi |  7 ++++
 .../arm/dts/fsl-ls1028a-kontron-sl28-var2.dts | 40 +++++++++++++++++++
 2 files changed, 47 insertions(+)

diff --git a/arch/arm/dts/fsl-ls1028a-kontron-sl28-var2-u-boot.dtsi b/arch/arm/dts/fsl-ls1028a-kontron-sl28-var2-u-boot.dtsi
index 79b771e074..4e0ce3f77d 100644
--- a/arch/arm/dts/fsl-ls1028a-kontron-sl28-var2-u-boot.dtsi
+++ b/arch/arm/dts/fsl-ls1028a-kontron-sl28-var2-u-boot.dtsi
@@ -1,2 +1,9 @@
 // SPDX-License-Identifier: GPL-2.0+
 #include "fsl-ls1028a-kontron-sl28-u-boot.dtsi"
+
+/ {
+	aliases {
+		ethernet0 = &mscc_felix_port0;
+		ethernet1 = &mscc_felix_port1;
+	};
+};
diff --git a/arch/arm/dts/fsl-ls1028a-kontron-sl28-var2.dts b/arch/arm/dts/fsl-ls1028a-kontron-sl28-var2.dts
index 1ea1265bcf..7a3aa21408 100644
--- a/arch/arm/dts/fsl-ls1028a-kontron-sl28-var2.dts
+++ b/arch/arm/dts/fsl-ls1028a-kontron-sl28-var2.dts
@@ -22,4 +22,44 @@
 	/delete-property/ phy-handle;
 };
 
+&enetc2 {
+	status = "okay";
+};
+
+&mscc_felix {
+	status = "okay";
+};
+
+&mscc_felix_port0 {
+	label = "gbe0";
+	phy-handle = <&phy0>;
+	phy-mode = "sgmii";
+	status = "okay";
+};
+
+&mscc_felix_port1 {
+	label = "gbe1";
+	phy-handle = <&phy1>;
+	phy-mode = "sgmii";
+	status = "okay";
+};
+
+&mscc_felix_port4 {
+	ethernet = <&enetc2>;
+	status = "okay";
+};
+
 /delete-node/ &phy0;
+&mdio0 {
+	phy0: ethernet-phy at 5 {
+		reg = <0x5>;
+		eee-broken-1000t;
+		eee-broken-100tx;
+	};
+
+	phy1: ethernet-phy at 4 {
+		reg = <0x4>;
+		eee-broken-1000t;
+		eee-broken-100tx;
+	};
+};
-- 
2.20.1