[PATCH v2 4/4] board: gateworks: imx8mm: Add Gateworks Venice board support

Tim Harvey tharvey at gateworks.com
Mon Mar 1 23:18:15 CET 2021


On Mon, Mar 1, 2021 at 8:04 AM Stefano Babic <sbabic at denx.de> wrote:
>
> Hi Tim,
>
> On 06.02.21 01:11, Tim Harvey wrote:
> > Add initial support for Gateworks Venice product family based on the
> > i.MX 8M Mini SoC
> >
> > Signed-off-by: Tim Harvey <tharvey at gateworks.com>
> > ---
>
> [snip]
>
> > diff --git a/arch/arm/mach-imx/imx8m/Kconfig b/arch/arm/mach-imx/imx8m/Kconfig
> > index c455f7b..7117650 100644
> > --- a/arch/arm/mach-imx/imx8m/Kconfig
> > +++ b/arch/arm/mach-imx/imx8m/Kconfig
> > @@ -43,7 +43,13 @@ config TARGET_IMX8MM_EVK
> >       select SUPPORT_SPL
> >       select IMX8M_LPDDR4
> >
> > -config TARGET_IMX8MN_DDR4_EVK
>
> This board is silently dropped...
>
> > +config TARGET_IMX8MM_VENICE
> > +     bool "Support Gateworks Venice iMX8M Mini module"
> > +     select IMX8MM
> > +     select SUPPORT_SPL
> > +     select IMX8M_LPDDR4
> > +
>
> This is your board, ok
>
> > +config TARGET_IMX8MN_EVK
>
> and this is the old board with wrong name. Somethin went wrong....
>

Stefano,

Oops... looks like I lost that in a rebase.

Does everything else look good or should I wait for further review
before sending a v3?

Thanks,

Tim


More information about the U-Boot mailing list