[PATCH v2 4/4] board: gateworks: imx8mm: Add Gateworks Venice board support

[Stefano Babic]

On 01.03.21 23:18, Tim Harvey wrote:
> On Mon, Mar 1, 2021 at 8:04 AM Stefano Babic <sbabic at denx.de> wrote:
>>
>> Hi Tim,
>>
>> On 06.02.21 01:11, Tim Harvey wrote:
>>> Add initial support for Gateworks Venice product family based on the
>>> i.MX 8M Mini SoC
>>>
>>> Signed-off-by: Tim Harvey <tharvey at gateworks.com>
>>> ---
>>
>> [snip]
>>
>>> diff --git a/arch/arm/mach-imx/imx8m/Kconfig b/arch/arm/mach-imx/imx8m/Kconfig
>>> index c455f7b..7117650 100644
>>> --- a/arch/arm/mach-imx/imx8m/Kconfig
>>> +++ b/arch/arm/mach-imx/imx8m/Kconfig
>>> @@ -43,7 +43,13 @@ config TARGET_IMX8MM_EVK
>>>        select SUPPORT_SPL
>>>        select IMX8M_LPDDR4
>>>
>>> -config TARGET_IMX8MN_DDR4_EVK
>>
>> This board is silently dropped...
>>
>>> +config TARGET_IMX8MM_VENICE
>>> +     bool "Support Gateworks Venice iMX8M Mini module"
>>> +     select IMX8MM
>>> +     select SUPPORT_SPL
>>> +     select IMX8M_LPDDR4
>>> +
>>
>> This is your board, ok
>>
>>> +config TARGET_IMX8MN_EVK
>>
>> and this is the old board with wrong name. Somethin went wrong....
>>
> 
> Stefano,
> 
> Oops... looks like I lost that in a rebase.
> 
> Does everything else look good or should I wait for further review
> before sending a v3?

IMHO was ok, and I have already applied 1/4 and 2/4. Just resend the 
last two patches.

Thanks,
Stefano

> 
> Thanks,
> 
> Tim
> 


-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================