[PATCH] net: designware: add Amlogic Meson8b & later glue driver
Neil Armstrong
narmstrong at baylibre.com
Mon Mar 8 10:42:47 CET 2021
On 24/02/2021 20:33, Neil Armstrong wrote:
> This adds a proper glue driver for the Designware DWMAC ethernet MAC IP
> found in the Amlogic Meson8, GXBB, GXL, GXM, G12A, G12B & SM1 SoCs.
>
> This is aimed to replace the static ethernet link setup found on the board
> init code for the Amlogic SoC based boards.
>
> Tested on a libretech-cc (S905x Internal RMII 10/100 PHY) and Khadas VIM3 (A113d
> with external 10/100/1000 RGMII PHY) to cover the most extreme setups.
>
> Signed-off-by: Neil Armstrong <narmstrong at baylibre.com>
> ---
> drivers/net/Kconfig | 8 ++
> drivers/net/Makefile | 1 +
> drivers/net/dwmac_meson8b.c | 150 ++++++++++++++++++++++++++++++++++++
> 3 files changed, 159 insertions(+)
> create mode 100644 drivers/net/dwmac_meson8b.c
>
> diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
> index e1d3b26687..cf062fad4d 100644
> --- a/drivers/net/Kconfig
> +++ b/drivers/net/Kconfig
> @@ -271,6 +271,14 @@ config ETH_DESIGNWARE
> 100Mbit and 1 Gbit operation. You must enable CONFIG_PHYLIB to
> provide the PHY (physical media interface).
>
> +config ETH_DESIGNWARE_MESON8B
> + bool "Amlogic Meson8b and later glue driver for Synopsys Designware Ethernet MAC"
> + depends on DM_ETH
> + select ETH_DESIGNWARE
> + help
> + This provides glue layer to use Synopsys Designware Ethernet MAC
> + present on the Amlogic Meson8b, GX, AXG & G12A SoCs.
> +
> config ETH_DESIGNWARE_SOCFPGA
> select REGMAP
> select SYSCON
> diff --git a/drivers/net/Makefile b/drivers/net/Makefile
> index 070ae7662c..ce7b9e3478 100644
> --- a/drivers/net/Makefile
> +++ b/drivers/net/Makefile
> @@ -18,6 +18,7 @@ obj-$(CONFIG_CORTINA_NI_ENET) += cortina_ni.o
> obj-$(CONFIG_CS8900) += cs8900.o
> obj-$(CONFIG_TULIP) += dc2114x.o
> obj-$(CONFIG_ETH_DESIGNWARE) += designware.o
> +obj-$(CONFIG_ETH_DESIGNWARE_MESON8B) += dwmac_meson8b.o
> obj-$(CONFIG_ETH_DESIGNWARE_SOCFPGA) += dwmac_socfpga.o
> obj-$(CONFIG_ETH_DESIGNWARE_S700) += dwmac_s700.o
> obj-$(CONFIG_DRIVER_DM9000) += dm9000x.o
> diff --git a/drivers/net/dwmac_meson8b.c b/drivers/net/dwmac_meson8b.c
> new file mode 100644
> index 0000000000..c0b6ef4994
> --- /dev/null
> +++ b/drivers/net/dwmac_meson8b.c
> @@ -0,0 +1,150 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * Copyright (C) 2021 BayLibre, SAS
> + */
> +
> +#include <common.h>
> +#include <asm/io.h>
> +#include <dm.h>
> +#include <phy.h>
> +#include "designware.h"
> +#include <dm/device_compat.h>
> +#include <linux/err.h>
> +
> +#define ETH_REG_0 0x0
> +#define ETH_REG_1 0x4
> +#define ETH_REG_2 0x18
> +#define ETH_REG_3 0x1c
> +
> +#define GX_ETH_REG_0_PHY_INTF BIT(0)
> +#define GX_ETH_REG_0_TX_PHASE(x) (((x) & 3) << 5)
> +#define GX_ETH_REG_0_TX_RATIO(x) (((x) & 7) << 7)
> +#define GX_ETH_REG_0_PHY_CLK_EN BIT(10)
> +#define GX_ETH_REG_0_INVERT_RMII_CLK BIT(11)
> +#define GX_ETH_REG_0_CLK_EN BIT(12)
> +
> +#define AXG_ETH_REG_0_PHY_INTF_RGMII BIT(0)
> +#define AXG_ETH_REG_0_PHY_INTF_RMII BIT(2)
> +#define AXG_ETH_REG_0_TX_PHASE(x) (((x) & 3) << 5)
> +#define AXG_ETH_REG_0_TX_RATIO(x) (((x) & 7) << 7)
> +#define AXG_ETH_REG_0_PHY_CLK_EN BIT(10)
> +#define AXG_ETH_REG_0_INVERT_RMII_CLK BIT(11)
> +#define AXG_ETH_REG_0_CLK_EN BIT(12)
> +
> +struct dwmac_meson8b_plat {
> + struct dw_eth_pdata dw_eth_pdata;
> + int (*dwmac_setup)(struct udevice *dev, struct eth_pdata *edata);
> + void *regs;
> +};
> +
> +static int dwmac_meson8b_of_to_plat(struct udevice *dev)
> +{
> + struct dwmac_meson8b_plat *pdata = dev_get_plat(dev);
> +
> + pdata->regs = (void *)dev_read_addr_index(dev, 1);
> + if ((fdt_addr_t)pdata->regs == FDT_ADDR_T_NONE)
> + return -EINVAL;
> +
> + pdata->dwmac_setup = (void *)dev_get_driver_data(dev);
> + if (!pdata->dwmac_setup)
> + return -EINVAL;
> +
> + return designware_eth_of_to_plat(dev);
> +}
> +
> +static int dwmac_setup_axg(struct udevice *dev, struct eth_pdata *edata)
> +{
> + struct dwmac_meson8b_plat *plat = dev_get_plat(dev);
> +
> + switch (edata->phy_interface) {
> + case PHY_INTERFACE_MODE_RGMII:
> + case PHY_INTERFACE_MODE_RGMII_ID:
> + case PHY_INTERFACE_MODE_RGMII_RXID:
> + case PHY_INTERFACE_MODE_RGMII_TXID:
> + /* Set RGMII mode */
> + setbits_le32(plat->regs + ETH_REG_0, AXG_ETH_REG_0_PHY_INTF_RGMII |
> + AXG_ETH_REG_0_TX_PHASE(1) |
> + AXG_ETH_REG_0_TX_RATIO(4) |
> + AXG_ETH_REG_0_PHY_CLK_EN |
> + AXG_ETH_REG_0_CLK_EN);
> + break;
> +
> + case PHY_INTERFACE_MODE_RMII:
> + /* Set RMII mode */
> + out_le32(plat->regs + ETH_REG_0, AXG_ETH_REG_0_PHY_INTF_RMII |
> + AXG_ETH_REG_0_INVERT_RMII_CLK |
> + AXG_ETH_REG_0_CLK_EN);
> + break;
> + default:
> + dev_err(dev, "Unsupported PHY mode\n");
> + return -EINVAL;
> + }
> +
> + return 0;
> +}
> +
> +static int dwmac_setup_gx(struct udevice *dev, struct eth_pdata *edata)
> +{
> + struct dwmac_meson8b_plat *plat = dev_get_plat(dev);
> +
> + switch (edata->phy_interface) {
> + case PHY_INTERFACE_MODE_RGMII:
> + case PHY_INTERFACE_MODE_RGMII_ID:
> + case PHY_INTERFACE_MODE_RGMII_RXID:
> + case PHY_INTERFACE_MODE_RGMII_TXID:
> + /* Set RGMII mode */
> + setbits_le32(plat->regs + ETH_REG_0, GX_ETH_REG_0_PHY_INTF |
> + GX_ETH_REG_0_TX_PHASE(1) |
> + GX_ETH_REG_0_TX_RATIO(4) |
> + GX_ETH_REG_0_PHY_CLK_EN |
> + GX_ETH_REG_0_CLK_EN);
> +
> + break;
> +
> + case PHY_INTERFACE_MODE_RMII:
> + /* Set RMII mode */
> + out_le32(plat->regs + ETH_REG_0, GX_ETH_REG_0_INVERT_RMII_CLK |
> + GX_ETH_REG_0_CLK_EN);
> +
> + if (!IS_ENABLED(CONFIG_MESON_GXBB))
> + writel(0x10110181, plat->regs + ETH_REG_2);
> +
> + break;
> + default:
> + dev_err(dev, "Unsupported PHY mode\n");
> + return -EINVAL;
> + }
> +
> + return 0;
> +}
> +
> +static int dwmac_meson8b_probe(struct udevice *dev)
> +{
> + struct dwmac_meson8b_plat *pdata = dev_get_plat(dev);
> + struct eth_pdata *edata = &pdata->dw_eth_pdata.eth_pdata;
> + int ret;
> +
> + ret = pdata->dwmac_setup(dev, edata);
> + if (ret)
> + return ret;
> +
> + return designware_eth_probe(dev);
> +}
> +
> +static const struct udevice_id dwmac_meson8b_ids[] = {
> + { .compatible = "amlogic,meson-gxbb-dwmac", .data = (ulong)dwmac_setup_gx },
> + { .compatible = "amlogic,meson-axg-dwmac", .data = (ulong)dwmac_setup_axg },
> + { }
> +};
> +
> +U_BOOT_DRIVER(dwmac_meson8b) = {
> + .name = "dwmac_meson8b",
> + .id = UCLASS_ETH,
> + .of_match = dwmac_meson8b_ids,
> + .of_to_plat = dwmac_meson8b_of_to_plat,
> + .probe = dwmac_meson8b_probe,
> + .ops = &designware_eth_ops,
> + .priv_auto = sizeof(struct dw_eth_dev),
> + .plat_auto = sizeof(struct dwmac_meson8b_plat),
> + .flags = DM_FLAG_ALLOC_PRIV_DMA,
> +};
>
Applied to u-boot-amlogic-next
More information about the U-Boot
mailing list