[PATCH] net: add Amlogic Meson G12A MDIO MUX driver
Neil Armstrong
narmstrong at baylibre.com
Mon Mar 8 10:43:01 CET 2021
On 25/02/2021 20:34, Ramon Fried wrote:
> On Wed, Feb 24, 2021 at 6:31 PM Neil Armstrong <narmstrong at baylibre.com> wrote:
>>
>> The Amlogic G12A & compatible SoCs embeds a mux to either communicate with
>> the external PHY or the internal 10/100 PHY.
>>
>> This adds support for this mux as a MDIO MUX device.
>>
>> Signed-off-by: Neil Armstrong <narmstrong at baylibre.com>
>> ---
>> drivers/net/Kconfig | 7 ++
>> drivers/net/Makefile | 1 +
>> drivers/net/mdio_mux_meson_g12a.c | 149 ++++++++++++++++++++++++++++++
>> 3 files changed, 157 insertions(+)
>> create mode 100644 drivers/net/mdio_mux_meson_g12a.c
>>
>> diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
>> index 41fa2fe566..e1d3b26687 100644
>> --- a/drivers/net/Kconfig
>> +++ b/drivers/net/Kconfig
>> @@ -797,4 +797,11 @@ config MDIO_MUX_MMIOREG
>> This driver is used for MDIO muxes driven by writing to a register in
>> the MMIO physical memory.
>>
>> +config MDIO_MUX_MESON_G12A
>> + bool "MDIO MUX for Amlogic Meson G12A SoCs"
>> + depends on DM_MDIO_MUX
>> + help
>> + This driver is used for the MDIO mux found on the Amlogic G12A & compatible
>> + SoCs.
>> +
>> endif # NETDEVICES
>> diff --git a/drivers/net/Makefile b/drivers/net/Makefile
>> index 511c87c3a5..070ae7662c 100644
>> --- a/drivers/net/Makefile
>> +++ b/drivers/net/Makefile
>> @@ -43,6 +43,7 @@ obj-$(CONFIG_MACB) += macb.o
>> obj-$(CONFIG_MCFFEC) += mcffec.o mcfmii.o
>> obj-$(CONFIG_MDIO_IPQ4019) += mdio-ipq4019.o
>> obj-$(CONFIG_MDIO_MUX_I2CREG) += mdio_mux_i2creg.o
>> +obj-$(CONFIG_MDIO_MUX_MESON_G12A) += mdio_mux_meson_g12a.o
>> obj-$(CONFIG_MDIO_MUX_MMIOREG) += mdio_mux_mmioreg.o
>> obj-$(CONFIG_MDIO_MUX_SANDBOX) += mdio_mux_sandbox.o
>> obj-$(CONFIG_MPC8XX_FEC) += mpc8xx_fec.o
>> diff --git a/drivers/net/mdio_mux_meson_g12a.c b/drivers/net/mdio_mux_meson_g12a.c
>> new file mode 100644
>> index 0000000000..b520bf98f0
>> --- /dev/null
>> +++ b/drivers/net/mdio_mux_meson_g12a.c
>> @@ -0,0 +1,149 @@
>> +// SPDX-License-Identifier: GPL-2.0
>> +/*
>> + * (C) Copyright 2021 BayLibre, SAS
>> + * Author: Neil Armstrong <narmstrong at baylibre.com>
>> + */
>> +
>> +#include <dm.h>
>> +#include <errno.h>
>> +#include <log.h>
>> +#include <miiphy.h>
>> +#include <asm/io.h>
>> +#include <linux/bitfield.h>
>> +
>> +#define ETH_PLL_STS 0x40
>> +#define ETH_PLL_CTL0 0x44
>> +#define PLL_CTL0_LOCK_DIG BIT(30)
>> +#define PLL_CTL0_RST BIT(29)
>> +#define PLL_CTL0_EN BIT(28)
>> +#define PLL_CTL0_SEL BIT(23)
>> +#define PLL_CTL0_N GENMASK(14, 10)
>> +#define PLL_CTL0_M GENMASK(8, 0)
>> +#define PLL_LOCK_TIMEOUT 1000000
>> +#define PLL_MUX_NUM_PARENT 2
>> +#define ETH_PLL_CTL1 0x48
>> +#define ETH_PLL_CTL2 0x4c
>> +#define ETH_PLL_CTL3 0x50
>> +#define ETH_PLL_CTL4 0x54
>> +#define ETH_PLL_CTL5 0x58
>> +#define ETH_PLL_CTL6 0x5c
>> +#define ETH_PLL_CTL7 0x60
>> +
>> +#define ETH_PHY_CNTL0 0x80
>> +#define EPHY_G12A_ID 0x33010180
>> +#define ETH_PHY_CNTL1 0x84
>> +#define PHY_CNTL1_ST_MODE GENMASK(2, 0)
>> +#define PHY_CNTL1_ST_PHYADD GENMASK(7, 3)
>> +#define EPHY_DFLT_ADD 8
>> +#define PHY_CNTL1_MII_MODE GENMASK(15, 14)
>> +#define EPHY_MODE_RMII 0x1
>> +#define PHY_CNTL1_CLK_EN BIT(16)
>> +#define PHY_CNTL1_CLKFREQ BIT(17)
>> +#define PHY_CNTL1_PHY_ENB BIT(18)
>> +#define ETH_PHY_CNTL2 0x88
>> +#define PHY_CNTL2_USE_INTERNAL BIT(5)
>> +#define PHY_CNTL2_SMI_SRC_MAC BIT(6)
>> +#define PHY_CNTL2_RX_CLK_EPHY BIT(9)
>> +
>> +#define MESON_G12A_MDIO_EXTERNAL_ID 0
>> +#define MESON_G12A_MDIO_INTERNAL_ID 1
>> +
>> +struct mdio_mux_meson_g12a_priv {
>> + struct udevice *chip;
>> + phys_addr_t phys;
>> +};
>> +
>> +static int meson_g12a_ephy_pll_init(struct mdio_mux_meson_g12a_priv *priv)
>> +{
>> + /* Fire up the PHY PLL */
>> + writel(0x29c0040a, priv->phys + ETH_PLL_CTL0);
>> + writel(0x927e0000, priv->phys + ETH_PLL_CTL1);
>> + writel(0xac5f49e5, priv->phys + ETH_PLL_CTL2);
>> + writel(0x00000000, priv->phys + ETH_PLL_CTL3);
>> + writel(0x00000000, priv->phys + ETH_PLL_CTL4);
>> + writel(0x20200000, priv->phys + ETH_PLL_CTL5);
>> + writel(0x0000c002, priv->phys + ETH_PLL_CTL6);
>> + writel(0x00000023, priv->phys + ETH_PLL_CTL7);
>> + writel(0x39c0040a, priv->phys + ETH_PLL_CTL0);
>> + writel(0x19c0040a, priv->phys + ETH_PLL_CTL0);
>> +
>> + return 0;
>> +}
>> +
>> +static int meson_g12a_enable_internal_mdio(struct mdio_mux_meson_g12a_priv *priv)
>> +{
>> + /* Initialize ephy control */
>> + writel(EPHY_G12A_ID, priv->phys + ETH_PHY_CNTL0);
>> + writel(FIELD_PREP(PHY_CNTL1_ST_MODE, 3) |
>> + FIELD_PREP(PHY_CNTL1_ST_PHYADD, EPHY_DFLT_ADD) |
>> + FIELD_PREP(PHY_CNTL1_MII_MODE, EPHY_MODE_RMII) |
>> + PHY_CNTL1_CLK_EN |
>> + PHY_CNTL1_CLKFREQ |
>> + PHY_CNTL1_PHY_ENB,
>> + priv->phys + ETH_PHY_CNTL1);
>> + writel(PHY_CNTL2_USE_INTERNAL |
>> + PHY_CNTL2_SMI_SRC_MAC |
>> + PHY_CNTL2_RX_CLK_EPHY,
>> + priv->phys + ETH_PHY_CNTL2);
>> +
>> + return 0;
>> +}
>> +
>> +static int meson_g12a_enable_external_mdio(struct mdio_mux_meson_g12a_priv *priv)
>> +{
>> + /* Reset the mdio bus mux */
>> + writel(0x0, priv->phys + ETH_PHY_CNTL2);
>> +
>> + return 0;
>> +}
>> +
>> +static int mdio_mux_meson_g12a_select(struct udevice *mux, int cur, int sel)
>> +{
>> + struct mdio_mux_meson_g12a_priv *priv = dev_get_priv(mux);
>> +
>> + debug("%s: %x -> %x\n", __func__, (u32)cur, (u32)sel);
>> +
>> + /* if last selection didn't change we're good to go */
>> + if (cur == sel)
>> + return 0;
>> +
>> + switch (sel) {
>> + case MESON_G12A_MDIO_EXTERNAL_ID:
>> + return meson_g12a_enable_external_mdio(priv);
>> + case MESON_G12A_MDIO_INTERNAL_ID:
>> + return meson_g12a_enable_internal_mdio(priv);
>> + default:
>> + return -EINVAL;
>> + }
>> +
>> + return 0;
>> +}
>> +
>> +static const struct mdio_mux_ops mdio_mux_meson_g12a_ops = {
>> + .select = mdio_mux_meson_g12a_select,
>> +};
>> +
>> +static int mdio_mux_meson_g12a_probe(struct udevice *dev)
>> +{
>> + struct mdio_mux_meson_g12a_priv *priv = dev_get_priv(dev);
>> +
>> + priv->phys = dev_read_addr(dev);
>> +
>> + meson_g12a_ephy_pll_init(priv);
>> +
>> + return 0;
>> +}
>> +
>> +static const struct udevice_id mdio_mux_meson_g12a_ids[] = {
>> + { .compatible = "amlogic,g12a-mdio-mux" },
>> + { }
>> +};
>> +
>> +U_BOOT_DRIVER(mdio_mux_meson_g12a) = {
>> + .name = "mdio_mux_meson_g12a",
>> + .id = UCLASS_MDIO_MUX,
>> + .of_match = mdio_mux_meson_g12a_ids,
>> + .probe = mdio_mux_meson_g12a_probe,
>> + .ops = &mdio_mux_meson_g12a_ops,
>> + .priv_auto = sizeof(struct mdio_mux_meson_g12a_priv),
>> +};
>> --
>> 2.25.1
>>
> Reviewed-by: Ramon Fried <rfried.dev at gmail.com>
>
Thanks !
Applied to u-boot-amlogic-next
More information about the U-Boot
mailing list