[PATCH 1/4] stm32mp: stm32prog: Add Kconfig file for stm32prog command

[Patrice CHOTARD]

Hi Patrick

On 2/25/21 1:37 PM, Patrick Delaunay wrote:
> Move CONFIG_CMD_STM32PROG in a specific Kconfig file for stm32prog command.
> 
> Signed-off-by: Patrick Delaunay <patrick.delaunay at foss.st.com>
> ---
> 
>  arch/arm/mach-stm32mp/Kconfig               | 18 +-----------------
>  arch/arm/mach-stm32mp/cmd_stm32prog/Kconfig | 18 ++++++++++++++++++
>  2 files changed, 19 insertions(+), 17 deletions(-)
>  create mode 100644 arch/arm/mach-stm32mp/cmd_stm32prog/Kconfig
> 
> diff --git a/arch/arm/mach-stm32mp/Kconfig b/arch/arm/mach-stm32mp/Kconfig
> index f538d7cb83..079d66a80c 100644
> --- a/arch/arm/mach-stm32mp/Kconfig
> +++ b/arch/arm/mach-stm32mp/Kconfig
> @@ -121,23 +121,6 @@ config STM32_ETZPC
>  	help
>  	  Say y to enable STM32 Extended TrustZone Protection
>  
> -config CMD_STM32PROG
> -	bool "command stm32prog for STM32CudeProgrammer"
> -	select DFU
> -	select DFU_RAM
> -	select DFU_VIRT
> -	select PARTITION_TYPE_GUID
> -	imply CMD_GPT if MMC
> -	imply CMD_MTD if MTD
> -	imply DFU_MMC if MMC
> -	imply DFU_MTD if MTD
> -	help
> -		activate a specific command stm32prog for STM32MP soc family
> -		witch update the device with the tools STM32CubeProgrammer,
> -		using UART with STM32 protocol or USB with DFU protocol
> -		NB: access to not volatile memory (NOR/NAND/SD/eMMC) is based
> -		    on U-Boot DFU framework
> -
>  config CMD_STM32KEY
>  	bool "command stm32key to fuse public key hash"
>  	default y
> @@ -177,6 +160,7 @@ config DEBUG_UART_CLOCK
>  	default 64000000
>  endif
>  
> +source "arch/arm/mach-stm32mp/cmd_stm32prog/Kconfig"
>  source "board/st/stm32mp1/Kconfig"
>  source "board/dhelectronics/dh_stm32mp1/Kconfig"
>  
> diff --git a/arch/arm/mach-stm32mp/cmd_stm32prog/Kconfig b/arch/arm/mach-stm32mp/cmd_stm32prog/Kconfig
> new file mode 100644
> index 0000000000..609a678793
> --- /dev/null
> +++ b/arch/arm/mach-stm32mp/cmd_stm32prog/Kconfig
> @@ -0,0 +1,18 @@
> +
> +config CMD_STM32PROG
> +	bool "command stm32prog for STM32CudeProgrammer"
> +	select DFU
> +	select DFU_RAM
> +	select DFU_VIRT
> +	select PARTITION_TYPE_GUID
> +	imply CMD_GPT if MMC
> +	imply CMD_MTD if MTD
> +	imply DFU_MMC if MMC
> +	imply DFU_MTD if MTD
> +	help
> +		activate a specific command stm32prog for STM32MP soc family
> +		witch update the device with the tools STM32CubeProgrammer,
> +		using UART with STM32 protocol or USB with DFU protocol
> +		NB: access to not volatile memory (NOR/NAND/SD/eMMC) is based
> +		    on U-Boot DFU framework
> +
> 


Reviewed-by: Patrice Chotard <patrice.chotard at foss.st.com>

Thanks
Patrice